British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BAe <strong>Hawk</strong> <strong>Mk</strong>. <strong>51</strong> : 70mm Sport Jet<br />
<strong>Construction</strong> <strong>Guide</strong> v1.3<br />
5 Glue the servo mount plate into the wing. It helps to have the servo installed into the mount so that you<br />
can line up the servo arm center with your previously created marks.<br />
6 Connect your servo extension to your servo.<br />
*I tie my extensions to my servo’s end with fishing line so that they don’t separate easily.<br />
7 Pull your servo line through to the center of the wing, using the previously installed lines.<br />
8 Install your control surface control horns, if you haven’t already done so.<br />
9 Test out your ailerons.<br />
At this point you should have installed Aileron servos and connected control surfaces. The previous steps can<br />
be repeated to install Flaps and their related servos.<br />
Page 19 of 47