British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
BAe <strong>Hawk</strong> <strong>Mk</strong>. <strong>51</strong> : 70mm Sport Jet<br />
<strong>Construction</strong> <strong>Guide</strong> v1.3<br />
Retractable Landing Gear: Steering Servo Install (pull-pull)<br />
There are numerous ways to install your steering servo. I chose to position my steering servo between the<br />
retracted nose wheel and the front of the retract cylinder, mounted to the top of the fuselage nose.<br />
I fabricated a mount for my servo that allows me to remove the servo for maintenance.<br />
1 Using some scrap balsa blocks, I constructed a mount that holds my servo in a vertical orientation.<br />
2 The mount is then glued with epoxy to the ceiling of the fuselage.<br />
3 With the gear down, pull lines are then attached to the servo arm ends and to the steering arm.<br />
Page 41 of 47
Change language