British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
British Aerospace Hawk Mk. 51 Construction Guide - Velocity-RC.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
BAe <strong>Hawk</strong> <strong>Mk</strong>. <strong>51</strong> : 70mm Sport Jet<br />
<strong>Construction</strong> <strong>Guide</strong> v1.3<br />
Elevator Installation: Servo Installation<br />
*This model uses full flying stabs to control pitch, just like the full scale <strong>Hawk</strong>. As a result of aerodynamic<br />
loads generated on the stabs, a high torque metal geared servo is re<strong>com</strong>mended for use in this model.<br />
1 Locate the 3 wooden parts that make up the elevator servo mount and dry fit the assembly (as shown<br />
below) first to be<strong>com</strong>e familiar with how it goes together. Complete assembly using CA or Epoxy.<br />
2 Place your (new) servo into the frame to test the fit. You may need to file the opening a bit to allow the<br />
servo wire to clear the opening.<br />
3 Use the screws, rubber bushings and brass parts that came with your servo to screw it to the mount.<br />
Page 21 of 47