Engineering Reference Manual 2010 - Hillphoenix

ON6UM
(5” BASEFRAME)
EXTENDED STANDARD FRONT
12" INTERNATIONAL DELI
STYLE FRONT
3" INTERNATIONAL DELI
STYLE FRONT
10"
LOAD LIMIT
LINE
72 5/8 in
[184.5 cm]
10"
12"
14"
51 3/8 in
[130.5 cm]
STANDARD
FRONT
19 15/16 in
[50.7 cm]
4" SOLID FRONT
24 1/8 in
[61.4 cm]
8 15/16 in
[22.6 cm]
26 1/16 in
[66.1 cm]
6" THERMOPANE FRONT
8 15/16 in
[22.6 cm]
18 15/16 in
[48.1 cm]
6" PLEXIGLAS FRONT
16"
24 15/16 in
[63.3 cm]
COIL
PLENUM
17 in
[43.2 cm]
21 3/16 in
[53.8 cm]
17 in
[43.2 cm]
25 7/16 in
[64.6 cm]
17 in
[43.2 cm]
27 5/16 in
[69.3 cm]
17 in
[43.2 cm]
27 1/8 in
[68.9 cm]
5 1/8 in [13.1 cm]
4 in [10. cm]*
24 3/16 in [61.4 cm]
29 3/8 in [74.7 cm]
35 13/16 in [91.0 cm]
REAR REFRIGERATION
(12 1/4" off of floor)
35 13/16 in
[91.0 cm]
24 3/16 in
[61.4 cm]
8 9/16 in
[21.8 cm]
26 3/16 in
[66.5 cm]
**
4 in
[10.2 cm]
23 1/4 in
[59.1 cm]
29 3/8 in
[74.7 cm]
WIRING-TO-TRAY
(STANDARD)
(Connection must be
flexible to front of case)
1 1/2" PVC DRAIN
CONNECTION
C
FRONT
L
OF CASE
96 in [243.8 cm] {8' case}
144 in [365.8 cm] {12' case}
KICK PLATE
LOCATION
REFRIGERATION
1 1/2 in [3.8 cm]
{END}
8 11/16 in [22.1 cm]
NOTES:
* STUB-UP AREA
** RECOMMENDED STUB-UP CENTERLINE FOR ELECTRICAL AND HUB DRAINS
• FRONT AND REAR SILL HEIGHTS VARY WITH BASEFRAME HEIGHT
• ENDS ADD APPROXIMATELY 1 INCH TO CASE HEIGHT
• A 2" MINIMUM AIR GAP IS REQUIRED BETWEEN THE REAR OF THE CASE AND A WALL
• AVAILABLE SHELF SIZES: 10", 12", 14" & 16"
• DASHED LINES SIGNIFY AREA INSIDE BASE RAIL BEHIND KICK-PLATE
COMPONENT
92 05/10