06 41 13 Interior Architectural Woodwork.pdf - Mercy

Sisters Of Mercy Health System ("Mercy")
MASTER SPECIFICATIONS
2009Feb24
2009Apr07
27. Solid-Surfacing Material: Homogeneous solid sheets of filled plastic resin complying with
ANSI Z124.3, for Type 5 or Type 6 material and performance requirements, without a
precoated finish
28. Adjustable Wall Shelves:
29. Typical Adjustable Shelves:
30. Standards: Extra Heavy Duty type: Manufacturer Knape and Vogt Manufacturing Co.’s No.
87 ANO. Installed 16” o.c. maximum
31. Brackets: Extra Heavy Duty type: Manufacturer Knape and Vogt Manufacturing Co.’s No.
187LL ANO, length shall be 2” less than shelf depth
32. Shelf Rests: Provide two (2) center rests (Manufacturer K&V’s No. 211 ANO) with rubber
cushion (Manufacturer K&V No. 129) at each bracket; one (1) at front and one (1) at back.
Bolt rest to bracket and screw shelf to rest
33. Typical ¾” laminate shelves trimmed with 1 ½” nosing at front of each shelf
34. Countertops with Integral Bowls: Coordinate holes for fixtures with the plumbing
contractor
2.3 FIRE RETARDANT TREATED MATERIALS
A. Fire-Retardant-Treated Formaldehyde Free Materials: For blocking, use materials impregnated
with fire-retardant chemical formulations to comply with AWPA C20 (lumber) and AWPA C27
(plywood), Exterior Type or Interior Type A. Use fire-retardant-treatment formulations that do
not bleed through or otherwise adversely affect finishes. Kiln-dry material after treatment
B. Fire-Retardant Formaldehyde Free particleboard: For blocking, provide panels made from softwood
particles and fire-retardant chemicals mixed together at time of panel manufacture to
achieve flame-spread rating of 25 or less and smoke-developed rating of 25 or less per ASTM E
84
C. Fire-Retardant Formaldehyde Free Fiberboard: For blocking, provide medium-density fiberboard
panels complying with ANSI A208.2, made from softwood fibers, synthetic resins, and
fire-retardant chemicals mixed together at time of panel manufacture to achieve flame-spread
rating of 25 or less and smoke-developed rating of 200 or less per ASTM E 84
2.4 CABINET HARDWARE AND ACCESSORIES
A. Architectural Woodwork Accessories:
1. Grommets: General Contractor to furnish and install. Approved by Architect. Locate as
directed by Owner
2. Architectural Woodwork Hardware:
a. General Requirements:
1) Exposed Casework Hardware Finish: US26D (Dull Chrome), unless
otherwise noted.
2) All wall cabinets designated for the storage of linens and other soft bulk
items to be equipped with fixed, screw-in hinges. No quick release hinges
permitted
3) Furnish necessary screws, staples, bolts or other fastenings of proper size
and type to secure items in position and, where exposed, to match finish of
hardware item fastened
INTERIOR ARCHITECTURAL WOODWORK 06 41 13 - 4