06 41 13 Interior Architectural Woodwork.pdf - Mercy

Sisters Of Mercy Health System ("Mercy")
MASTER SPECIFICATIONS
2009Feb24
2009Apr07
2. Drawer Pulls: Aluminum metal or brushed chrome rod-type handles, approximately 3/8”
diameter x approximately 7/8” min. finger clearance (as required for ADA compliance) x
128 mm screw centers
a. Hafele No. 116.05.922 silver coated anodized finish
b. Ives No. 37
c. Stanley No. 4483-1/2
3. Locks: Where indicated, provide locks as approved by the Owner
4. Elbow Catch: Where double door cabinets are indicated to receive a lock on one (1) door,
provide an elbow catch on the adjacent door
a. Hafele No. 245.70.107
b. Ives No. IV-2A92
5. Casework Shelf Supports: Where shelving is indicated provide slotted-type standards and
brackets of type needed to support shelves with uniform 40-lb. per sq. ft. loading. Drilled
holes with pin type shelf supports are not acceptable
a. Standards: Recessed 5/8” wide x 3/16” high x length required; zinc; horizontal
slots for adjustment ½” o.c
1) Standard: No. 255; Knape & Vogt
2) Bracket: No. 256; Knape & Vogt
6. Grommets: Furnished and installed by General Contractor. Approved by Architect. Locate
as directed by Owner
E. Miscellaneous Millwork Items:
1. Wall Shelf-Supports (Heavy Duty): Provide slotted-type standard and brackets of type
needed to properly support shelves
a. Standards: Provide heavy duty 12 gauge approximately 7/8” wide x 11/16”
high x length required, slotted steel standards where shown. Shelves shall be
adjustable at 2” centers
1) Spacing 16” o.c. maximum
2) No. 87; Knape & Vogt Mfg. Co
b. Shelf Brackets: Provide heavy-duty weight triple-hook steel with single
molded nylon cam lock lever. Provide for 12” wide shelves unless noted
otherwise on the drawings
1) Size: Brackets shall be 2” less than shelf depth
2) No. 187; Knape & Vogt Mfg. Co
c. Shelf Rests: Provide one (1) shelf rest at each bracket; attach shelf rest to bottom
of shelf
1) No. 210 and 211; Knape & Vogt Mfg. Co
INTERIOR ARCHITECTURAL WOODWORK 06 41 13 - 6