OMB-DBK Option Cards and Modules - Omega Engineering

DaqBook/2000 Series Devices
If using power from AC mains (through adapter), you need not worry about Daq device power use. If using
battery-power, you can compute operational endurance from the battery’s watt×hr rating and power tables.
DaqBook/2000 Series devices use no power from the PC, but do require DC voltage from an AC-to-DC
adapter with a supply range of +10 VDC to +30 VDC, or another suitable DC source.
Various AC adapter models support power grids of USA, Europe, Japan, and Asia.
Power Requirements Table
Device Power Required (Watts)
DaqBook/100 510 mA @ 12 VDC = 6.12 W
DaqBook/112 360 mA @ 12 VDC = 4.32 W
DaqBook/120 510 mA @ 12 VDC = 6.12 W
DaqBook/200 620 mA @ 12 VDC = 7.44 W
DaqBook/216 600 mA @ 12 VDC = 7.2 W
DaqBook/260 620 mA @ 12 VDC = 7.44 W
DaqBook/2001, /2005 1000 mA @ 15 VDC = 15.0 W
DaqBook/2020 1000 mA @ 15 VDC = 15.0 W
DaqOEM/2001, /2005 1000 mA @ 15 VDC = 15.0 W
DaqLab 1000 mA @ 15 VDC = 15.0 W
DaqScan 1000 mA @ 15 VDC = 15.0 W
DaqBoard/100A 1330 mA @ 5 VDC = 6.65 W
DaqBoard/112A 970 mA @ 5 VDC = 4.85 W
DaqBoard/200A 1700 mA @ 5 VDC = 8.5 W
DaqBoard/216A 1340 mA @ 5 VDC = 6.7 W
DaqBoard/2000 Series board 700 mA @ 5 VDC = 3.5 W
(Note 1)
cPCI DaqBoard/2000c Series board 700 mA @ 5 VDC = 3.5 W
(Note 1)
DaqBook/2000A
DaqBook/2000X
Under No External Load (0W):
467mA @ 15VDC = 7 W
Under Full External Load (15W):
1533mA @ 15VDC = 23 W
DaqBook/2000E Under No External Load (0W):
1133mA @ 15VDC = 17 W
Under Full External Load (15W):
2200mA @ 15VDC = 33 W
Daq PC-Card/112B
Normal Operation:
Daq PC-Card/216B
160 mA @ 5 VDC = 0.8W
Power Down Mode:
40 mA @ 5 VDC = 0.2 W
Note 1: For DaqBoard/2000 Series and /2000c Series boards, consumption can be
up to 10 W with external accessories.
Daq Systems 967794 DBK Basics, pg. 17