J-BNB - VPMThane.org
J-BNB - VPMThane.org
J-BNB - VPMThane.org
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PHYSIO-CHEMICAL PARAMETERS OF CREEK WATER BEFORE AND AFTER<br />
GANPATI VISARJAN.<br />
Hirendra Shelke 1 , Ajay Patil 1 , Yashwantkumar Shivappa 1 , Amit Mishra 1 , Suraj Rathi 1 , Dilip<br />
Shenai 2 .<br />
1. Students M Sc I Dept of Environment Science B.N Bandodkar College of Science<br />
Thane (w).<br />
2. Asst Professor, Dept of Environment Science B.N Bandodkar College of Science<br />
Thane (w).<br />
Introduction :<br />
Water quality refers to chemical, physical & biological characteristics of water. It is the measure<br />
of the condition of the water relative to the requirements of one or more biotic species & to any human<br />
need or purpose. It is most frequently used by reference to a set of standards against which compliance<br />
can be assessed. The most common standards used to assess water quality relate to health of ecosystems,<br />
safety of human contact & drinking water.<br />
The parameters of water quality are determined by the intended use. Work in the area of water<br />
quality tends to be focused on water that is treated for human consumption, industrial use or in the<br />
environment.<br />
Dissolved Oxygen (D.O) , Total solids, Hardness, Chlorides,- Density etc these water parameters were<br />
determined before & after Ganpati visarjan (For 1 & ½ day, 5 th , 7 th & 10 th day.)<br />
Methodology:<br />
Dissolved oxygen:-<br />
The method used was winkler‘s azide modification titrimetric method . The sample were fixed on<br />
the field using manganese sulphate solution [winkler‘s A] and alkali iodized azide solution [winkler‘s B]<br />
The fixed samples were titrated against 0.0125N Na2s2o3 after addition of sulphuric acid to dissolved the<br />
precipitate using starch as an indicator. The end point was blue to colourless.<br />
Formula,<br />
Dissolved oxygen(mg/l)= (N*C.B.R.*8*1000)/V2(V1-V)/V<br />
Where,<br />
V=total amt of chemical added<br />
V1=total amt of water sample<br />
V2=amt of sample taken for titration<br />
N=normality of Na2S203<br />
56 J<strong>BNB</strong> (Vol. I ) Issue I January’2013