Coin/banknote change machines Operator's ... - Comesterogroup

Operator’s Manual Fenix
It is advisable to:
Avoid dragging the machine.
Avoid tilting the container or resting it on one side during transport and handling.
Avoid bumping the machine.
Avoid leaving the machine exposed to the weather (even if still in the package).
4.3 Unpacking
After being tested and equipped the machine is delivered within a corrugated carton
package which ensures it is protected during transport and handling.
To simplify the loading/unloading of the machine, even if special machinery is used,
the container is usually placed on a special wooden pallet.
Unpack the machine following the instructions printed on the
container.
Both the cardboard package and the pallet meet the standards for
recycling and disposal (follow current local regulations).
4.4. Identification of the machine
Figure 1 shows the nameplate with the main operating specifications and identification
data. Pay particular attention to the serial number printed on the box.
Always mention this number any time you require service, parts, repairs or information
relative to the operation of the machine.
Fig. 1
The machine’s identification plate must always be clearly readable. It
is prohibited to remove it or tamper with the data printed in it. If the
nameplate is damaged or is lost, it is necessary to order a
replacement from the manufacturer. The plate is assembled on the
machine. It is important to remember that the warranty is associated
with machine’s identification number.
12