Coin/banknote change machines Operator's ... - Comesterogroup
Coin/banknote change machines Operator's ... - Comesterogroup
Coin/banknote change machines Operator's ... - Comesterogroup
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operator’s Manual Fenix<br />
C. Configuration<br />
Select “CONF” on the setup menu to access Fenix’s configuration settings. These<br />
settings are password-protected to prevent tampering with the system. The display<br />
will show the following screen:<br />
For password activation and management, refer to “Administrator/setup menu 2”<br />
(page 32). The default password is: 111111<br />
When you enter the password the test and maintenance menu will appear:<br />
ENAB<br />
Setup<br />
Test & maintenance<br />
MANU<br />
CONF<br />
ESC<br />
You may use the test and maintenance menu to perform verification, maintenance<br />
and configuration operations.<br />
C.1 Enabling peripherals<br />
The system will show the following screen when “ENAB” is selected:<br />
ON >><br />
Device<br />
Hopper evolution<br />
Address 04<br />
Enabled<br />
OFF<br />
ESC<br />
36