Complete Product Catalog - Norman Equipment Co.

More documents

Recommendations

Info

SERIES SDG Description The Series SDG is designed for use with movable machine guards/access gates which must be closed for operator safety. Their positive-opening NC contacts provide a significantly higher level of safety than conventional springdriven switches whose contacts can weld or stick shut. And their tamper-resistant design prevents bypassing with simple tools, bent wires or other readily available means. Their IP67 rating makes them ideal for interlocking safety guards in hostile environments. Operation The Series SDG electromechanical safety interlock switch consists of a rugged switch mechanism and a geometricallyunique actuating key. The key is mounted to the movable guard. Upon opening of the guard the NC contact(s) are forced to open through a direct (non-resilient) mechanical linkage with the actuating key. These positive-break NC contacts assure circuit interruption (and machine stoppage) upon removal of the actuator key. (The NO contact closes upon key removal.) When the guard is closed, the actuating key forces the NC contacts to close and the NO contact to re-open. Typical Applications The Series SDG is intended for use as a safety interlock switch on movable machine guards which, when open, expose the operator/maintenance personnel to machine hazards. Typical applications are the interlocking of protective gratings, access doors/gates, hinged covers, access panels and other movable guards. Movable Machine Guard Safety Interlock Switch Features & Benefits • Highly tamper-resistant actuating mechanism … difficult to defeat with simple tools, tape, bent wires, etc. Reduces liability exposure. • Four optional key entry locations … rotatable actuator head provides installation versatility. • “Positive-Break” NC contacts … assure circuit interruption upon actuator key removal. • Built-in retention force (1.2 pounds) … eliminates inadvertent opening of guard due to shock/vibration. • Watertight design … meets IP67 washdown requirements. • High-strength steel actuator key … tolerates mechanical abuse without damage. • Rugged, corrosion-resistant metal housing … tolerates the most hostile environments. • Wide selection of actuating keys … to meet diverse application requirements. • Designed to meet Performance Level requirements of EN ISO 13849-1 and Safety Control Categories of EN 954-1. • Funnel-shaped key entry … forgiving of key misalignment. • Other 2-contact configurations available … please consult factory. Part Number Contacts Description* SDG01.1044 SDG01.1103 SDG01.1110 Part Number BO BOW BOR BOWR BOF/HIS.1 AVAILABLE STANDARD MODELS (Includes 1 ⁄2" NPT Conduit Adapter. Actuator Keys Sold Separately) 2 NO & 1 NC 1 NO & 2 NC 3 NC AVAILABLE ACTUATOR KEYS Description Standard straight actuator key (20" minimum closing radius) Right-angled straight actuator key (20" minimum closing radius) Radial entry actuator key (10" minimum closing radius) Right-angled bent actuator key (10" minimum closing radius) Keyed interlock switch with front* key entry and slow action contacts. *Field-rotatable for key entry from right, left or rear. Units are supplied with tamper-resistant (one-way) screws to replace the standard screws after rotating the actuator head for desired direction of key entry. Pivoting straight actuator key (rear-mounted) (13.8" Minimum closing radius) BOF/HIS.2 Pivoting straight actuator key (top-mounted) (13.8" Minimum closing radius) 28
SDG AVAILABLE MODELS AND ACCESSORIES MECHANICAL SPECIFICATIONS Housing Cast aluminum with enamel paint Actuator Key Steel (chromated) (defeat-resistant design) Degree of Protection IP67 (Switch housing) IP00 (Reversing and locking head) Holding Force 5N (1.2 pounds) Travel for Positive-Break 12.5mm Force to Reach Approx. 5N (1.2 pounds) Positive-Break Closing Force Approx. 5N (1.2 pounds) Operating Temperature –13°F to +158°F Mechanical Life 1 million operations (minimum) Shock Resistance >30g / 18ms Vibration Resistance >15g / 10…200Hz Conformity to Standards IEC 947-5-1 CE EN 60947-5-1 BG-GS-ET-15 EN ISO 13849-1 UL EN 954-1 CSA Minimum Closing Radius Dependent upon actuator key used. Please see actuator key selection chart. ELECTRICAL SPECIFICATIONS Contacts Contact Configuration Contact Gap Contact Rating Switching Action Short Circuit Protection Rated Insulation Voltage Rated Impulse Withstand Voltage Type Terminals Fine silver Double-pole, double-break with electrically separated contact bridges 2 × 3.5 mm 8A (250VAC) Slow-action, positive-break NC contacts 10A (slow-blow) 250VAC 4kV Screw terminals with self-lifting clamps for up to 13 AWG solid wire (2.5mm 2 ) or 13 AWG stranded (1.5mm 2 ) wire 1 DIMENSIONS M20x1 M20x1 5.5mm M20x1 29
Page 1 and 2: GK-1 CATALOG-HANDBOOK TENTH EDITION
Page 3 and 4: TABLE OF CONTENTS Topic Page Alphan
Page 5 and 6: ABOUT SCHMERSAL K.A. SCHMERSAL GmbH
Page 7 and 8: eak, tamper resistant and fault det
Page 9 and 10: KEYED INTERLOCK SWITCHES 1 Switch S
Page 11 and 12: AZ17 AVAILABLE MODELS AND ACCESSORI
Page 13 and 14: AZ17 TECHNICAL DATA DIMENSIONS 24 .
Page 15 and 16: AZ17zi AVAILABLE MODELS AND ACCESSO
Page 17 and 18: AZ17zi TECHNICAL DATA DIMENSIONS B1
Page 19 and 20: AZ15/16 AVAILABLE MODELS AND ACCESS
Page 21 and 22: AZ15/16 ACTUATOR KEY SPECIFICATIONS
Page 23 and 24: 1 Safer by Design 17
Page 25 and 26: AZ16zi AVAILABLE MODELS AND ACCESSO
Page 27 and 28: AZ16zi INDIVIDUALLY-CODED ACTUATOR
Page 29 and 30: SERIES AZ 200 AVAILABLE KEYS AND DI
Page 31 and 32: TZG TECHNICAL DATA MECHANICAL SPECI
Page 33: 1 Safer by Design 27
Page 39 and 40: AZ3350 TECHNICAL DATA MECHANICAL SP
Page 43 and 44: SERIES SHGV TECHNICAL DATA MECHANIC
Page 45 and 46: AZ415 TECHNICAL DATA MECHANICAL SPE
Page 47 and 48: AZ415 TECHNICAL DATA ACTUATOR KEY D
Page 49 and 50: KEYED INTERLOCK SWITCHES WITH SOLEN
Page 51 and 52: AZM170 AVAILABLE MODELS AND ACCESSO
Page 53 and 54: AZM170 TECHNICAL DATA SWITCHING DIA
Page 55 and 56: AZM170 TECHNICAL DATA DIMENSIONS ST
Page 57 and 58: AZM161 AVAILABLE MODELS AND ACCESSO
Page 59 and 60: AZM161 TECHNICAL DATA DIMENSIONS (S
Page 61 and 62: SERIES AZM 200 AVAILABLE KEYS AND D
Page 63 and 64: SERIES MZM 100 TECHNICAL DATA MECHA
Page 65 and 66: SERIES TZF/TZM AVAILABLE MODELS AND
Page 67 and 68: SERIES TZF/TZM ACTUATOR KEY SPECIFI
Page 69 and 70: SERIES TKF/TKM AVAILABLE MODELS AND
Page 71 and 72: SERIES TKF/TKM ACTUATOR KEY SPECIFI
Page 73 and 74: SERIES TZKF/TZKM AVAILABLE MODELS A
Page 75 and 76: SERIES TZKF/TZKM TECHNICAL DATA CON
Page 77 and 78: AZM415 TECHNICAL DATA MECHANICAL SP
Page 79 and 80: 9 AZM415 TECHNICAL DATA ACTUATOR KE
Page 81 and 82: APPLICATION ACCESSORIES STS Safety
Page 83 and 84: SERIES STS SELECTION TABLE & ORDERI
Page 85 and 86:
SERIES STS DIMENSIONS AZ 16-STS30-
Page 87 and 88:
SERIES TFA/TFI Guard Alignment Aid
Page 89 and 90:
SERIES B25 AVAILABLE STANDARD MODEL
Page 91 and 92:
ZSD TECHNICAL DATA MECHANICAL SPECI
Page 93 and 94:
SERIES TFH TECHNICAL DATA MECHANICA
Page 95 and 96:
SERIES SEPK(G) MECHANICAL SPECIFICA
Page 97 and 98:
EMERGENCY CABLE-PULL SWITCHES SELEC
Page 99 and 100:
ZQ700 TECHNICAL DATA MECHANICAL SPE
Page 101 and 102:
ZQ900 TECHNICAL DATA MECHANICAL SPE
Page 103 and 104:
S900 Cable-Pull Switch Wire Tension
Page 105 and 106:
NON-CONTACT SAFETY SENSORS Sensor S
Page 107 and 108:
BNS250 TECHNICAL DATA MECHANICAL SP
Page 109 and 110:
Page 111 and 112:
BNS33 AVAILABLE MODELS AND ACCESSOR
Page 113 and 114:
BNS33 TECHNICAL DATA DIMENSIONS Not
Page 115 and 116:
BNS33S TECHNICAL DATA MECHANICAL SP
Page 117 and 118:
BNS36 TECHNICAL DATA MECHANICAL SPE
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
BNS16 TECHNICAL DATA MECHANICAL SPE
Page 127 and 128:
SERIES BNS-B20 TECHNICAL DATA MECHA
Page 129 and 130:
SERIES CSS 180 TECHNICAL DATA MECHA
Page 131 and 132:
SERIES CSS 34 TECHNICAL DATA MECHAN
Page 133 and 134:
SERIES CSS 30S TECHNICAL DATA MECHA
Page 135 and 136:
Page 137 and 138:
BNS SERIES - COMPATIBLE SERIES AES
Page 139 and 140:
AES 1102/AES 1112 Typical Applicati
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
AES 2135 Typical Applications Typic
Page 147 and 148:
AES 2335 Typical Applications Typic
Page 149 and 150:
AES 1337 MECHANICAL SPECIFICATIONS
Page 151 and 152:
SERIES SRB 211 AN MECHANICAL SPECIF
Page 153 and 154:
AES 2285/SRB 207 AN MECHANICAL SPEC
Page 155 and 156:
PULSE-ECHO BASED NON-CONTACT SAFETY
Page 157 and 158:
SERIES AZ 200 AVAILABLE KEYS AND DI
Page 159 and 160:
SERIES AZ 200 DIAGNOSTICS Function
Page 161 and 162:
6 Safer by Design 171
Page 163 and 164:
SERIES AZM 200 AVAILABLE KEYS AND D
Page 165 and 166:
SERIES AZM 200 DIAGNOSTICS Function
Page 167 and 168:
Page 169 and 170:
SERIES MZM 100 TECHNICAL DATA MECHA
Page 171 and 172:
SERIES MZM 100 WIRING EXAMPLE Safet
Page 173 and 174:
SERIES CSS 180 TECHNICAL DATA MECHA
Page 175 and 176:
SERIES CSS 180 WIRING EXAMPLE 1 Saf
Page 177 and 178:
WIRING EXAMPLES FOR PULSE-ECHO BASE
Page 179 and 180:
Page 181 and 182:
SERIES CSS 34 WIRING EXAMPLE 1 Seri
Page 183 and 184:
SERIES CSS 34 WIRING EXAMPLE 3 Wiri
Page 185 and 186:
SERIES CSS 30S TECHNICAL DATA MECHA
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
SERIES CSS 16 TECHNICAL DATA WIRING
Page 193 and 194:
COMPATIBLE PULSE-ECHO SAFETY CONTRO
Page 195 and 196:
SD-Gateway for Field Bus protocol S
Page 197 and 198:
HINGED SAFETY INTERLOCK SWITCHES Sw
Page 199 and 200:
SERIES TESF TECHNICAL DATA MECHANIC
Page 201 and 202:
SERIES TESF TECHNICAL DATA DETERMIN
Page 203 and 204:
SERIES TESZ TECHNICAL DATA MECHANIC
Page 205 and 206:
TVS335 TECHNICAL DATA MECHANICAL SP
Page 207 and 208:
T.C 235/236 TECHNICAL DATA MECHANIC
Page 209 and 210:
T.C 236 TECHNICAL DATA Types of Act
Page 211 and 212:
SAFETY-RATED LIMIT SWITCHES Switch
Page 213 and 214:
Z/T235 TECHNICAL DATA MECHANICAL SP
Page 215 and 216:
Z/T235 TECHNICAL DATA 0 2,5 6 0 2,5
Page 217 and 218:
Z/T235 TECHNICAL DATA 70° 30° 0 3
Page 219 and 220:
Safer by Design 7 231
Page 221 and 222:
Page 223 and 224:
Z/T236 TECHNICAL DATA 0 2,5 6 0 2,5
Page 225 and 226:
Z/T236 TECHNICAL DATA 0 2,8 7 13-14
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Z332 TECHNICAL DATA MECHANICAL SPEC
Page 243 and 244:
Z332 TECHNICAL DATA 90° 24° 0 24
Page 245 and 246:
SAFETY LIGHT CURTAINS & BEAMS SELEC
Page 247 and 248:
Typical applications: • Power-dri
Page 249 and 250:
safety systems Important conditions
Page 251 and 252:
Normal approach for light grids: (R
Page 253 and 254:
Safety light barriers System featur
Page 255 and 256:
Safety light barriers SLB 400 Techn
Page 257 and 258:
Safety light barriers Note Wiring d
Page 259 and 260:
Safety light barriers Note • Moni
Page 261 and 262:
Safety light curtains and safety li
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Safety light curtains with integrat
Page 273 and 274:
Safety light curtains with integrat
Page 275 and 276:
Reflection light sensor (Muting sen
Page 277 and 278:
Page 279 and 280:
Safety monitoring modules for optoe
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
SAFETY PRESSURE MATS 9 GENERAL PROD
Page 289 and 290:
Calculation of the safety distance
Page 291 and 292:
67 SMS 4 safety mats accessories Sy
Page 293 and 294:
Safety mats Note • Protection of
Page 295 and 296:
FAIL-TO-SAFE SAFETY EDGES 9 SELECTI
Page 297 and 298:
SERIES SE ORDERING & ASSEMBLY INFOR
Page 299 and 300:
SERIES SE TECHNICAL DATA 9 Force/Tr
Page 301 and 302:
SERIES SE TECHNICAL DATA SE Series
Page 303 and 304:
SERIES SE TECHNICAL DATA Typical Wi
Page 305 and 306:
GENERAL & SPECIFIC-PURPOSE SAFETY C
Page 307 and 308:
SAFETY CONTROLLER SELECTION CRITERI
Page 309 and 310:
SERIES SRB 201 ZH & SRB 301 HC/R ME
Page 311 and 312:
SERIES SRB 202 MSL MECHANICAL SPECI
Page 313 and 314:
SERIES SRB 206 ST & SRB 206 SQ MECH
Page 315 and 316:
SERIES SRB 211 AN MECHANICAL SPECIF
Page 317 and 318:
SERIES SRB 211 ST MECHANICAL SPECIF
Page 319 and 320:
SERIES SRB 301 LC & SRB 301 LCI MEC
Page 321 and 322:
SERIES SRB 301 LC/B MECHANICAL SPEC
Page 323 and 324:
SERIES SRB 301 MC MECHANICAL SPECIF
Page 325 and 326:
SERIES SRB 301 ST SERIES SRB 301 ST
Page 327 and 328:
Page 329 and 330:
SERIES SRB 202 C & SRB 400 C MECHAN
Page 331 and 332:
SERIES SRB 401 LC MECHANICAL SPECIF
Page 333 and 334:
SERIES SRB 402 EM & SRB 401 EM-115V
Page 335 and 336:
Page 337 and 338:
SERIES PROTECT-IE MECHANICAL SPECIF
Page 339 and 340:
SERIES PROTECT-PE MECHANICAL SPECIF
Page 341 and 342:
Protect PSC 10 SELECTION GUIDE The
Page 343 and 344:
Modular Safety System Representatio
Page 345 and 346:
Modular Safety System Possible oper
Page 347 and 348:
Terminal Assignment Modular Safety
Page 349 and 350:
SAFE SPEED CONTROL 10 SELECTION GUI
Page 351 and 352:
Examples of assembly Monitoring Sys
Page 353 and 354:
Page 355 and 356:
AZS 2305 Typical Applications 10 Ty
Page 357 and 358:
FWS 1205 Typical Applications 10 Ty
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
SSW 301HV Typical Applications 10 T
Page 371 and 372:
AZR31S1 Typical Applications 10 Typ
Page 373 and 374:
APPENDICES Topic Page • Selected
Page 375 and 376:
Fail-to-Danger: a component or syst
Page 377 and 378:
hazards present to the machine oper
Page 379 and 380:
MACHINE SAFETY STANDARDS European M
Page 381 and 382:
ANSI B11.16 Metal Powder Compacting
Page 383 and 384:
SELECTED CONVERSION FACTORS TO CONV
Page 385 and 386:
GENERAL TERMS & CONDITIONS OF SALE
Page 387 and 388:
NOTES 401
show all

Complete Product Catalog - Norman Equipment Co.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?