catalog

F3P - Chipbreaker for Finishing Machining
The F3P chipbreaker has positive rake
angles to allow smooth cutting and to
reduce the cutting forces, thus reducing
wear and increasing the tool life dramatically.
Ap
[mm]
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
F3P
0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65
F [mm/rev]
The machining area is depth of cut
from 0.25 mm up to 2.5 mm and feed
from 0.05 mm/rev up to 0.3 mm/rev.
F3P
• Double-sided insert with
chipbreaker for finishing steel
• Reinforced cutting edge
• Positive rake angle for smooth cutting
M3P - Chipbreaker for Medium Machining
Ap
[mm]
6.5
6
5.5
5
4.5
4
3.5
3
2.5
2
1.5
1
0.5
M3P
0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65
F [mm/rev]
M3P
Future
Item
• Double-sided insert chipbreaker for medium
machining of steel with reinforced cutting edge
• Positive rake for smooth cutting
and reduced cutting forces
R3P - Chipbreaker for Rough Machining
Ap
[mm]
14
13
12
11
10
9
8
7
6
5
4
3
2
R3P
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.3
F [mm/rev]
R3P
• Single-sided insert chipbreaker for
rough machining of steel
• Reinforced cutting edge
• Positive rake angle for smooth cutting
and reduced cutting forces
13