catalog

More documents

Recommendations

Info

ECONOMICAL HEAVY DUTY T465 LNMT 22...-CS Heavy Duty, 65° Face Mills with Tangentially Clamped Inserts ISCAR is introducing the T465 FLN D…22ST - a modified family of 65° lead angle face mills with protective seats. The 65° lead angle is a very efficient solution for high metal removal face machining of cast iron and steel components. Using these face mills minimizes burrs and edge chipping for cast iron applications. The new face mills carry tangentially clamped inserts with 4 cutting edges, which can be used for up to 19 mm depth of cut. T465 LNMT 22...R/L Available are three edge configurations: T465 LNHT 2212-DNTR in grades IC830, IC5400, DT7150, IC5100 and IC810, used for steel and cast iron. The T465 LNHT 2212-DN... inserts feature a high positive rake cutting angle for a light cut and minimum power consumption, and a positive axial angle (R.H. helix) for soft entry into and exit from the workpiece. The insert has a 2.5 mm flat wiper for high quality surface finish. In addition, available are inserts with chip splitting grooves that can greatly improve performance in rough milling operations. T465 LNHT 2212-DN-R in grade IC330, used for machining stainless steel and high temperature alloys. T465 LNMT 2212-CS in grades IC830 and IC5400. The tools were designed for machining large parts such as those found in power generation or marine industries. 152
T465 FLN-22ST 65° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical, 22 mm Long Cutting Edges D3 Da 65° ap L D D1 Right-hand shown Designation D D1 ap Z L Da Arbor D3 Kg T465 FLN D125-06-40R-22ST 125.00 143.6 19.00 6 63.00 40.00 B 95.00 3.60 T465 FLN D125-08-40R-22ST 125.00 143.6 19.00 8 63.00 40.00 B 95.00 3.80 T465 FLN D160-07-40R-22ST 160.00 185.6 19.00 7 63.00 40.00 C 120.00 5.20 T465 FLN D160-09-40R-22ST 160.00 185.6 19.00 9 63.00 40.00 C 120.00 5.30 T465 FLN D200-08-60R-22ST 200.00 218.8 19.00 8 63.00 60.00 C 135.00 7.70 T465 FLN D200-10-60R-22ST 200.00 218.8 19.00 10 63.00 60.00 C 135.00 7.70 T465 FLN D250-10-60R-22ST 250.00 270.0 19.00 10 63.00 60.00 C 150.00 12.20 T465 FLN D250-12-60R-22ST 250.00 270.0 19.00 12 63.00 60.00 C 150.00 12.10 T465 FLN D315-12-60R-22ST 315.00 338.0 19.00 12 80.00 60.00 D 225.00 27.30 Spare Parts Designation Seat Bayonet Screw Torx Blade T-Handle Insert Screw Torx Blade 1 T465 FLN D125-06-40R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 T465 FLN D125-08-40R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 T465 FLN D160-07-40R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 T465 FLN D160-09-40R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 T465 FLN D200-08-60R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 T465 FLN D200-10-60R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 T465 FLN D250-10-60R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 T465 FLN D250-12-60R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 T465 FLN D315-12-60R-22ST TT65-22 SR 11400664-HGNX-L12 * BLD IP20/S7 SW6-T SR 10507547 BLD IP25/S7 * Optional, should be ordered separately T465 LNHT/LNMT 2212 Tangentially Clamped Insert with 4 Cutting Edges 22 mm Long, for 65° Cutters l W 65° ap 2.5 S Dimensions Tough Ö Hard Recommended Machining Data ap fz Designation W l S ap (mm) (mm/t) T465 LNHT 2212-ZN-R (1) 12.00 25.39 19.80 19.00 l 5.00-15.00 0.12-0.35 T465 LNHT 2212-ZNTR/L (2) 12.00 25.39 19.80 19.00 l l l l l 5.00-19.00 0.25-0.45 T465 LNMT 2212ZNTR-CS (3) 12.00 25.39 19.80 19.00 l l 5.00-19.00 0.25-0.35 • LNMT - utility inserts. LNHT - precision inserts. (1) For stainless steel and high temperature alloys. (2) T465 LNHT 2212-ZNTL (for use on special request tools) available only in grade IC830 (3) Chip splitting insert IC330 IC830 IC5400 IC810 DT7150 IC5100 153
Page 1 and 2:
New Productscatalog Metric Version
Page 4 and 5:
P M K N S H 3 A tough submicron sub
Page 6 and 7:
P M K N S H 3 3 A very tough substr
Page 8 and 9:
P M K N S H 3 3 3 A tough grade TiC
Page 10:
Standard Grade Sumo Tec Grade The S
Page 13 and 14:
Application M3PW The first letter (
Page 15 and 16:
F3P - Chipbreaker for Finishing Mac
Page 17 and 18:
WNMG-F3P Double-Sided Trigon Insert
Page 19 and 20:
DNMG-F3P Double-Sided 55° Rhombic
Page 21 and 22:
DNMG-M3M Double-Sided 55° Rhombic
Page 23 and 24:
TNMX-HTW Double-Sided Triangular In
Page 25 and 26:
PTGNR/L 91° Lead Angle Lever Lock
Page 27 and 28:
YNMG-F3P Double-Sided 25° Corner I
Page 29 and 30:
DCMT-F3P-SL 55° Rhombic Positive F
Page 31 and 32:
Highly Rigid Profiling Tool 29
Page 33 and 34:
WOMG 13-R3P-IQ Double-Sided 7° Neg
Page 35 and 36:
PCBOR/L-IQ Lever Lock and Dovetail
Page 37 and 38:
PSDON-IQ Lever Lock and Dovetail Po
Page 39 and 40:
l WOMG 10-T3P-IQ Double-Sided 6° N
Page 41 and 42:
CNMM-R3P Single-Sided 80° Rhombic
Page 43 and 44:
SUPER LOMX-H6P Tangential Inserts w
Page 45 and 46:
Advantages Insert locking in two di
Page 47 and 48:
PWLNR/L-08X-JHP Lever Lock Toolhold
Page 49 and 50:
l PDJNR/L-15-JHP Lever Lock Toolhol
Page 51 and 52:
l l C#-PWLNR/L-08-JHP Lever Lock To
Page 53 and 54:
l l C#-SVJCR/L-16-JHP Screw Lock To
Page 55 and 56:
l PCLCR/L-JHP Lever Lock Tools with
Page 57 and 58:
• USER GUIDE For most of the tool
Page 59 and 60:
• USER GUIDE Test Report Material
Page 61 and 62:
• USER GUIDE ISOTURN JHP Tools Th
Page 63:
USER GUIDE JHP Connector 9 6 11 SW=
Page 67 and 68:
DCN R-12D Indexable Head Drills wit
Page 69 and 70:
DCNS-3D Indexable Head Drills witho
Page 71 and 72:
CHAMRING Drill Holders for Drilling
Page 73 and 74:
FCP Exchangeable Flat Bottom DCN Dr
Page 75 and 76:
FOR COMPOSITE MATERIALS 73
Page 78 and 79:
EFFICIENT LOCKING MECHANISM Heavy D
Page 80 and 81:
THBR/L/N-IQ Blades Carrying Cartrid
Page 82 and 83:
EFFICIENT SIDE LOCKING MECHANISM GE
Page 84 and 85:
EFFICIENT SIDE LOCKING MECHANISM Up
Page 86 and 87:
SCIR/L-22BF-BR/BL Back Turning Inse
Page 88 and 89:
QUICK & RIGID Clamping system High
Page 90 and 91:
SECURE Clamping FOR FACE MACHINING
Page 92 and 93:
TNFFA-IQ Reinforced Face Grooving B
Page 94 and 95:
FOR THREADING PENTACUT ISCAR is exp
Page 96 and 97:
l THREADING LINE PENTA 24-W Whitwor
Page 98 and 99:
Max 340 BAR MODULAR-GRIP Adapters f
Page 100 and 101:
MAHPR/L-JHP Holders with High Press
Page 102 and 103:
l l CGPAD-JHP Adapters with High Pr
Page 104 and 105: l GHDR/L-JHP (short pocket) Groovin
Page 106 and 107: l TGBHR/L-JHP Grooving and Turning
Page 108 and 109: PENTAIQGRIP Iscar is introducing th
Page 110 and 111: PENTA D-N-C Inserts with 5 Cutting
Page 112 and 113: Market Standard Brilliant Parting W
Page 114 and 115: 3 5 0 L I N E TGTBU Blocks for TGSU
Page 116 and 117: 3 5 0 L I N E TGTR/L-D Integral Sha
Page 118 and 119: TAG N-J/JS/JT Parting and Grooving
Page 120 and 121: Max 340 BAR High Pressure Coolant w
Page 122 and 123: TGFH-JHP Parting and Grooving Blade
Page 124 and 125: l USER GUIDE Tools for Machining wi
Page 126: 124
Page 129 and 130: HM390 ETP-10 90° Endmills Carrying
Page 131 and 132: HM390 ETD-15 90° Endmills Carrying
Page 133 and 134: HM390-10 Shoulder Milling Workpiece
Page 135 and 136: H690 F90AX 90° Face Mills Carrying
Page 137 and 138: TEST reports Shoulder Milling Workp
Page 139 and 140: HSM90S EAL-14 Long Reach Endmills f
Page 141 and 142: Application: Up to Full Immersion T
Page 143 and 144: P290 ACK-18 Extended Flute Endmills
Page 145 and 146: P290 FPW 90° Face Mills Carrying 1
Page 147 and 148: P290 ACKT 1806 Single-Sided Rectang
Page 149 and 150: T490 FLN-22ST 90° Face Mills Carry
Page 151 and 152: IQ845 FSY-R07 Face Mills, Carrying
Page 153: SOF45-26 Heavy Duty 45° Face Mills
Page 157 and 158: H606 FR-12 Face Mills Carrying Doub
Page 159 and 160: SD-SP Interchangeable Solid Carbide
Page 161 and 162: T490 LNMT 08/13/16...-CS Tangential
Page 163 and 164: HM90 ADCT 1505PDR-CF Inserts with 2
Page 165 and 166: SOE45 8/16 Multifunctional Endmills
Page 167 and 168: SOF45 (continued) Multifunctional F
Page 169 and 170: S890 FSN-13 Multifunctional Face Mi
Page 171 and 172: OXMT 0507 Insert with 8 FEEDMILL Cu
Page 174 and 175: Ultimate Clamping Security Hydrauli
Page 176 and 177: BT-HYDRO S Hydraulic and Weldon Sid
Page 178 and 179: PreventS Tool Extraction Pull-Out S
Page 180 and 181: Your Tool Advisor Genius ITA recomm
Page 182 and 183: CTMS - Commodity and Tool Managemen
Page 184: Follow us on WWW.ISCAR.COM
show all

catalog

Create successful ePaper yourself

Delete template?

Save as template?