catalog
catalog
catalog
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ECONOMICAL<br />
HEAVY DUTY<br />
T465 LNMT 22...-CS<br />
Heavy Duty, 65° Face Mills with<br />
Tangentially Clamped Inserts<br />
ISCAR is introducing the T465 FLN D…22ST - a<br />
modified family of 65° lead angle face mills with<br />
protective seats. The 65° lead angle is a very<br />
efficient solution for high metal removal face<br />
machining of cast iron and steel components.<br />
Using these face mills minimizes burrs and edge<br />
chipping for cast iron applications.<br />
The new face mills carry tangentially clamped inserts<br />
with 4 cutting edges, which can be used for up to<br />
19 mm depth of cut.<br />
T465 LNMT 22...R/L<br />
Available are three edge configurations:<br />
T465 LNHT 2212-DNTR in grades IC830, IC5400,<br />
DT7150, IC5100 and IC810, used for steel and<br />
cast iron.<br />
The T465 LNHT 2212-DN... inserts feature a high<br />
positive rake cutting angle for a light cut and minimum<br />
power consumption, and a positive axial angle (R.H.<br />
helix) for soft entry into and exit from the workpiece.<br />
The insert has a 2.5 mm flat wiper for high quality<br />
surface finish. In addition, available are inserts with<br />
chip splitting grooves that can greatly improve<br />
performance in rough milling operations.<br />
T465 LNHT 2212-DN-R in grade IC330, used for<br />
machining stainless steel and high temperature alloys.<br />
T465 LNMT 2212-CS in grades IC830 and IC5400.<br />
The tools were designed for machining large parts<br />
such as those found in power generation or<br />
marine industries.<br />
152