European Product Catalogue 2013 - Audio-Technica

38
artist series
dyn. freq. resp.: 40–15,000 Hz
10 dB
50 100 200 500 1k 2k 5k 10k 20k
Frequency in Hertz
LEGEND 12" or more on axis
hypercardioid
0˚
330˚
30˚
300˚
60˚
270˚
90˚
240˚
120˚
LEGEND
200 Hz
210˚
150˚
1 kHz
180˚
5 kHz
SCALE IS 5 DECIBELS PER DIVISION 8 kHz
Response in dB
artist series dual element instrument microphone (PC 305-MC 220)
ATM250DE
339,00 € Dual-element instrument microphone
• Audio-Technica’s proven dual-element design features two
elements (condenser and dynamic) enclosed in a single housing
• Neodymium dynamic element provides punch
and attack, while the condenser element captures the full audio
spectrum
• Elements are positioned in a perfect phase relationship, something
practically unachievable with two separate microphones
• Perfect for kick drum, guitar amps and instrument use
• Integral 80 Hz HPF switch and 10dB pad (condenser element)
• Includes AT8471 isolation clamp for shock protection, secure
mounting and easy positioning
cond. freq. resp.: 40–20,000 Hz
ATM250DE
included accessories: AT8471
isolation clamp, threaded
adapter, 16.5' cable, pouch
50 100 200 500 1k 2k 5k 10k 20k
Frequency in Hertz
LEGEND 12" or more on axis
Roll-off
270˚
frequency response: 40–15,000 Hz
300˚
240˚
330˚
0˚
30˚
60˚
120˚
210˚
150˚
180˚
SCALE IS 5 DECIBELS PER DIVISION
90˚
cardioid
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
10 dB
Response in dB
artist series dynamic instrument microphone (PC 305-MC 220)
ATM250
209,00 € Hypercardioid dynamic instrument microphone
• Frequency response tailored for kick drum, percussion, brass,
and other highly dynamic instruments
• Handles very high SPL at close range
• Big, warm low-frequency response with excellent presence
• Hypercardioid polar pattern reduces pickup of sounds from the
sides and rear, improving isolation of desired sound source
• Durable performance for professional applications
• Hi-ENERGY ® neodymium magnet for improved output and transient
response
• Superior off-axis rejection for maximum gain before feedback
• Includes isolation clamp for shock protection, secure mounting and
easy positioning
100
1k
5k
50 200 10k
500 2k 20k
Frequency in Hertz
LEGEND 12" or more on axis
270˚
300˚
240˚
330˚
0˚
30˚
60˚
120˚
210˚
150˚
180˚
SCALE IS 5 DECIBELS PER DIVISION
hypercardioid
90˚
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
10 dB
Response in dB
included accessories:
AT8471 isolation clamp,
threaded adapter, pouch
European professional guide 2013-2014, prices in Euro Ex-VAT (1)
ATM250
Specifications ATM250DE ATM250
Element Condenser, dynamic Dynamic
Polar Pattern Cardioid (condenser) - Hypercardioid (dynamic) Hypercardioid
Frequency Response 40-20,000 Hz (condenser) - 40-15,000 Hz (dynamic) 40-15,000 Hz
Low Frequency Roll-Off 80 Hz, 12 dB/octave (condenser)
Open Circuit Sensitivity – 49 dB (3.5 mV), re 1V at 1 Pa* (condenser) – 54 dB (1.9 mV), re 1V at 1 Pa*
– 53 dB (2.2 mV), re 1V at 1 Pa* (dynamic)
Impedance 50 ohms (condenser) - 600 ohms (dynamic) 600 ohms
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D. (condenser)
Dynamic Range (typical) 122 dB, 1 kHz at Max SPL (condenser)
Signal-to-Noise Ratio
68 dB, 1 kHz at 1 Pa* (condenser)
Phantom Power Requirements 11-52V DC, 3.5 mA typical (condenser)
Switches
Flat, roll-off; 10 dB pad (condenser only)
Weight 320 g 252 g
Dimensions 143.6 mm long, 55.0 mm diameter 127.5 mm long, 55.0 mm diameter
Output Connector Integral 5-pin XLRM-type Integral 3-pin XLRM-type
Cable
5.0 m (16.5’) dual shielded, 8-conductor cable, 5-pin XLRF-type
connector at microphone, two 3-pin XLRM-type output connectors
Accessories Furnished AT8471 isolation clamp for 5/8”-27 threaded stands; AT8471 isolation clamp for 5/8”-27 threaded stands;
5/8”-27 to 3/8”-16 adapter; soft protective pouch 5/8”-27 to 3/8”-16 threaded adapter; soft protective pouch
*1 Pascal = 10 dynes/cm 2 = 10 microbars = 94 dB SPL