barcelona - Pinmar
barcelona - Pinmar
barcelona - Pinmar
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Marine Supplies Division 2007<br />
www.pinmar.com
BARCELONA<br />
DOCKSHOP BARCELONA<br />
Paseo Juan de Borbón, 86<br />
08039 Barcelona<br />
Tel: (+34) 932 214 454<br />
Fax: (+34) 932 214 160<br />
YACHT PAINTING DIVISION<br />
Tel: (+34) 932 254 596<br />
Fax: (+34) 932 254 985<br />
pinmar@pinmar.com<br />
www.pinmar.com<br />
<strong>Pinmar</strong> • 3
Contents<br />
Contact Details<br />
PALMA<br />
PALMA DE MA<br />
HEAD OFFICE<br />
PINMAR SL<br />
Cami Escollera No 5<br />
07012 Palma de Mallorca<br />
Tel: (+34) 971 713 744<br />
Fax: (+34) 971 718 143<br />
DOCKSHOP MOLLET<br />
Contramuelle Mollet 4<br />
07012 Palma de Mallorca<br />
Tel: (+34) 971 720 672<br />
Fax: (+34) 971 727 078<br />
DOCKSHOP VARADERO<br />
Muelle Viejo<br />
Espigón de la Consigna<br />
07012 Palma de Mallorca<br />
Tel: + 34 971 425649<br />
Fax: + 34 971 425645<br />
PRIMERS<br />
MASTICS<br />
PAINTS<br />
VARNISHES<br />
ACCESSORIES<br />
ABRASIVES<br />
SECURITY<br />
TAPES<br />
SOLVENTS<br />
MACHINERY<br />
CLEANING<br />
ADHESIVES<br />
MARINE PLY<br />
TEAK<br />
CHANDLERY PRODUCTS<br />
MAINTENANCE PRODUCTS<br />
YACHT COVERING SYSTEMS<br />
SPECIAL PRODUCTS<br />
2<br />
• <strong>Pinmar</strong>
ISO<br />
PINMAR SL<br />
System of Environmental Management based on ISO 14001<br />
<strong>Pinmar</strong> S.L. has implemented an Environmental Management System (EMS) in its all facilities, based on<br />
the environmental standard ISO 14001.<br />
This EMS implies the execution of different guidelines, instructions and records on the part of the<br />
personnel of <strong>Pinmar</strong> and has a direct impact on the activity of painting of yachts. It also constitutes the<br />
part of the general system of management of the company which includes its organizational structure,<br />
the planning of its activities and the responsibilities, practices, procedures, controls and resources to<br />
develop, implement, revise and maintain its environmental policies.<br />
The environmental aspects of <strong>Pinmar</strong>’s activities have been identified and evaluated according to their<br />
importance and have been established as objectives in the EMS. This involves the coordination of<br />
painting works on boats and environmental management.<br />
The execution of the company’s guidelines and directions by the environmental and waste material<br />
controller is essential. The controls include:<br />
How the dangerous residuals are segregated.<br />
The harmless and non-harmless waste materials must be se gregated. The harmless waste material may<br />
be disposed of together with normal waste according to type, in containers which are blue (paper or<br />
cardboard) yellow (light packaging) or green (glass).<br />
The harmful waste materials must also be separated according to the type of material in which the<br />
substance is found.<br />
Principally these consist of:<br />
1. Absorbent paint- and solvent-polluted plastics. To be separated in drums or bags. Also cellulose<br />
cloths and polluted paper that must eventually be disposed of by a certified processor of harmful<br />
residues.<br />
2. Polluted metal containers which have contained paints, solvents or varnishes. These should also be<br />
dealt with by a certified processor of harmful residues.<br />
Environmental policies.<br />
In order to achieve the objectives of its Environmental Management System, <strong>Pinmar</strong> SL has adopted<br />
the following policies:<br />
To respect and to protect the environment as one of the basic objectives in the management of the<br />
activities of the company.<br />
To prevent contamination of the environment in general and the atmosphere in particular establishing<br />
control and supervision to minimize chemical emissions.<br />
To raise awareness amongst <strong>Pinmar</strong>’s clients, suppliers and employees of the importance of the EMS in<br />
the activities of the company.<br />
To establish a continuous review or the EMS in order to maintain and improve its effectiveness.<br />
Remy Millott<br />
Managing Director<br />
4<br />
• <strong>Pinmar</strong>
Marine Supplies Division 2007<br />
Awlgrip . . . . . . . . . . . . . . . . . . . . . . . . 8<br />
Epifanes . . . . . . . . . . . . . . . . . . . . . . . 10<br />
West System . . . . . . . . . . . . . . . . . . . 12<br />
Seajet . . . . . . . . . . . . . . . . . . . . . . . . . 14<br />
Snappy Teak-Nu . . . . . . . . . . . . . . . 15<br />
Shurhold . . . . . . . . . . . . . . . . . . . . . . 16<br />
Saba . . . . . . . . . . . . . . . . . . . . . . . . . . . 18<br />
Underwater Lights . . . . . . . . . . . . . 19<br />
Toubois . . . . . . . . . . . . . . . . . . . . . . . . 20<br />
Sika . . . . . . . . . . . . . . . . . . . . . . . . . . . 22<br />
International . . . . . . . . . . . . . . . . . . . 24<br />
Anza . . . . . . . . . . . . . . . . . . . . . . . . . . 26<br />
3M . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28<br />
Corian . . . . . . . . . . . . . . . . . . . . . . . . . 32<br />
Andamios . . . . . . . . . . . . . . . . . . . . . 33<br />
<strong>Pinmar</strong> Chandlery . . . . . . . . . . . . . 34<br />
With our years of experience, <strong>Pinmar</strong> Marine Supplies Division,<br />
DOCKSHOP, can source and supply any product on the market.<br />
This catalogue details our most commonly sold brands and<br />
products to assist in the placing of orders.<br />
LOOK OUT FOR OUR STAR PRODUCTS<br />
STAR<br />
PRODUCT<br />
<strong>Pinmar</strong> • 5
Boat soaps, teak cleaners, deck brushes and all other<br />
exterior cleaning and maintenance products.<br />
Abrasives, scrapers, tapes, masking plastic<br />
and all essential preparation materials.<br />
Caulking compounds, resins<br />
and adhesives.<br />
Specially prepared touch-up kits and<br />
expert advice on how to use them.<br />
Brushes, spray guns, masks,<br />
rollers, and all necessary<br />
application materials.<br />
Primers, fillers and topcoats from the<br />
world’s leading coatings manufacturers.<br />
All leading brands of antifouling and advice<br />
on which one to choose for your yacht.<br />
6<br />
• <strong>Pinmar</strong>
Heat guns, sanders and other essential<br />
electric and air tools.<br />
Varnishes of all kinds whether<br />
single or multi-component<br />
“<br />
<strong>Pinmar</strong>,<br />
unbeatable<br />
yachtcare<br />
from stem<br />
to stern<br />
”<br />
Teak planks, minideckings, marine<br />
plywood and veneers.<br />
Ropes, shackles, safety equipment<br />
and all deck accessories.<br />
A full range of essential spares can be<br />
sourced and delivered world-wide.<br />
<strong>Pinmar</strong> • 7
AWLGRIP<br />
“It’s gotta be AWLGRIP”<br />
Awlgrip is the world leader in<br />
professional coatings for the yacht<br />
market and they strive to lead by<br />
example. Health, safety and the<br />
environment are of utmost importance<br />
to Awlgrip and they continuously<br />
support and commit resources to<br />
sustain safe and environmentally<br />
friendly operations around the globe.<br />
Antifouling<br />
STAR<br />
PRODUCT<br />
Awlstar Gold Label<br />
Awlstar's unique cleaning formula prevents the<br />
permanent attachment of slime and other types<br />
of fouling organisms below the waterline,<br />
minimizing the need to dive and scrub.<br />
Appropriate for all fibreglass, wood or steel hulls,<br />
Awlstar's self polishing surface ‘ablates’, or erodes<br />
away, at a controlled rate that reduces hull drag<br />
by continually exposing a fresh layer of paint.<br />
Many owners report its effectiveness lasts two or<br />
three seasons with just minor touch-ups.<br />
• Prevents buildup of fouling organism slime<br />
• Appropriate for use on fibreglass, wood or steel<br />
• Unique self polishing formula reduces drag and<br />
maximizes hull speed<br />
• Recommended where extended dry docking<br />
intervals are required<br />
• For use below the waterline only<br />
• Not recommended for aluminium boats.<br />
Topcoats<br />
For years, serious boat owners have demanded<br />
Awlgrip coatings systems to protect their<br />
valuable investments from harsh marine<br />
elements. Awlgrip provides a durable high gloss<br />
finish to wood, fibreglass, aluminium or steel and<br />
can be applied with a roller, brush or spray gun.<br />
With its superior resistance to sun, saltwater,<br />
chemicals and abrasion, Awlgrip is ideal for<br />
coating everything from topsides, cabin tops,<br />
decks and masts to engines.<br />
STAR<br />
PRODUCT<br />
Polyester Urethane Topcoat<br />
Base<br />
• Long lasting, high gloss<br />
• Superior resistance to sun, saltwater,<br />
chemicals and abrasion<br />
• Appropriate for use on fibreglass, steel and<br />
wood<br />
• Low maintenance<br />
• Above the waterline use only<br />
• Available in quarts and gallons<br />
• Custom colours available<br />
STAR<br />
PRODUCT<br />
Topcoat Converter<br />
Flattening agent reduces the gloss of Awlgrip<br />
or Awlcraft Urethane Topcoats to a flat or semigloss<br />
finish. Preferred application by spraying.<br />
T-Series Reducers<br />
Brushing reducers for epoxy primers and<br />
urethane topcoats. Use with Awlgrip and<br />
Awlcraft 2000 topcoats where temperature and<br />
humidity conditions very much affect the finish.<br />
Blend with topcoats in any ratio to fine tune flow<br />
and evaporation rates.<br />
Fillers and Primers<br />
High Build Primer Base &<br />
Catalyst<br />
High build epoxy primer. Two component for use<br />
where high build and filling is required. An<br />
industry workhorse. Not to be used below the<br />
waterline.<br />
STAR<br />
PRODUCT<br />
D8001 545 Epoxy Primer<br />
& Catalyst<br />
Outstanding corrosion and adhesive properties<br />
for steel, aluminium, wood and fibreglass<br />
substrates. Can be used to seal filler primers and<br />
fairing work before applying topcoats. Apply<br />
with spray, brush or roller, above or below the<br />
waterline.<br />
STAR<br />
PRODUCT<br />
Awlfair Filler Base & Catalyst<br />
Two component, premium trowelable fillers for<br />
fairing, levelling or smoothing surface<br />
imperfections due to gouges, pitting, dents or<br />
weld seams. Use above or below the waterline.<br />
STAR<br />
PRODUCT<br />
Hull-Gard Primer and Catalyst<br />
Offers excellent corrosion protection with<br />
extended recoatability.<br />
8<br />
• <strong>Pinmar</strong>
Brightwork<br />
STAR<br />
PRODUCT<br />
AWLBRITE PLUS Clear Acrylic<br />
Urethane<br />
A unique combination of light fast resins and<br />
ultraviolet inhibitors, Awlbrite Plus provides a<br />
clear, long lasting high gloss finish to brightwork,<br />
greatly enhancing the long term value of any<br />
yacht. Awlbrite Plus is easy to apply, fast drying,<br />
and provides a far more durable finish than<br />
traditional varnish.<br />
• Unique combination of light fast<br />
resins, ultraviolet inhibitors, and<br />
absorbers.<br />
• Provides a tough, long lasting, high<br />
gloss finish<br />
• Excellent durability<br />
• Reduces maintenance by 50% or more<br />
compared to conventional spar varnish<br />
• Fast dry, fast recoat for quick build up<br />
• Easy to apply by brush with excellent<br />
flow characteristics<br />
• Compatible with Awlspar and most<br />
varnishes.<br />
Classic Spar Varnish<br />
Awlspar is specially formulatd to combine<br />
ultraviolet inhibitor technology and superior<br />
durability in an easy to apply formula. Specifically<br />
designed for brightwork exposed to harsh<br />
weather elements, Awlspar’s excellent building<br />
characteristics and rich amber colour make<br />
coating by brush smooth and simple.<br />
• Excellent durability<br />
• Fast dry, fast recoat for build up<br />
• Excellent application by brush<br />
• Superior base for Awlbrite Plus<br />
Maintenance Products<br />
Awlgrip devloped Awlcare for customers who<br />
want to protect their painted finish and need the<br />
additional cleaning power of a hand applied<br />
product. Awlcare will help temporarily seal and<br />
restore shine to painted surfaces that have<br />
become porous due to age or mistreatment.<br />
Once a painted surface becomes porous it allows<br />
dirt to collect on the surface making the normal<br />
washing process more difficult. Regular<br />
applications of Awlcare will help limit the<br />
porosity, helping to maintain a satisfactory<br />
appearance until there is time to repaint.<br />
Awlwash Washdown<br />
Concentrate 73234<br />
Formulated to clean Awlgrip, Awlcraft 2000 and<br />
Awlgrip 2 topcoats. Does not contain alkalis,<br />
acids or abrasives. It is free rinsing which<br />
decreases drying time and 100% biodegradable.<br />
AwlCare Protective<br />
Polymer Sealer 73240<br />
STAR<br />
PRODUCT<br />
STAR<br />
PRODUCT<br />
Awlcare is hand-applied, non/abrasive, synthetic<br />
polymer formulated to protect Awlgrip, Awlcraft<br />
2000 and Awlgrip 2 topcoats. Contains no harsh<br />
abrasives and will not scratch the painted surface.<br />
It leaves a non yellowing, protective polymer<br />
coating which lasts through multiple washings.<br />
Removes mild stains such as water spots and<br />
diesel soot. With regular applications, it increases<br />
resistance to attack from acid rain and other<br />
environmental applications.<br />
<strong>Pinmar</strong> • 9
EPIFANES<br />
Since 1902 Epifanes has been setting<br />
the highests stands of paint quality in<br />
beauty, conservation and performance.<br />
Epifanes develop and manufacture the<br />
finest marine coatings posible. No<br />
other finish is required to look as<br />
beautiful and perform so well in such<br />
adverse environments as a yacht<br />
coating.<br />
Through state of the art technology<br />
and the use of the finest ingredients,<br />
they ensure Epifanes Yacht Coatings<br />
will always be the choice for those who<br />
demand quality.<br />
Varnish Products<br />
STAR<br />
PRODUCT<br />
Epifanes Clear Vanish<br />
(one-component)<br />
The ultimate in high gloss finish. Based on tung<br />
oil, phenolic-modified alkyd resins and maximum<br />
UV resistance. Offers outstanding protection for<br />
interior and exterior woods above the waterline.<br />
STAR<br />
PRODUCT<br />
Epifanes Rubbed Effect Varnish<br />
(one-component)<br />
Gives a rich, clear, amber satin finish. Ideal for any<br />
interior softwood or hardwood and highly<br />
recommended for cabin sole, doors and trim. Its<br />
hard satin finish has good scratch and scuff<br />
resistance and is impervious to most onboard<br />
chemicals. Use in conjunctions with Epifanes<br />
Clear Gloss Varnish, or Polyurethane Clear Gloss to<br />
obtain maximum durability, clarity and depth.<br />
Epifanes Wood Finish Gloss<br />
(one-component)<br />
The ultimate varnish alternative without sanding<br />
if recoated within 72 hours. Specially formulated<br />
for oily woods like teak and iroco.<br />
Epifanes Wood Finish Matt<br />
(one-component)<br />
As Gloss, it has a rich matt finish with a clear<br />
amber colour and has the appearance of<br />
being hand-rubbed.<br />
Epifanes Polyurethane Clear<br />
Gloss (two-component)<br />
The ultimate in hardness. Ultra high gloss and<br />
completely clear. Suitable for plywoods, coating<br />
epoxy resins, saloon tables and cabin soles. High<br />
UV protection, resistance to abrasion, weathering,<br />
chemicals and loss of gloss.<br />
Epifanes Polyurethane Clear<br />
Satin (two-component)<br />
The ultimate in a hard, rich satin sheen.<br />
Recommended for interior use and as a finishing<br />
coat over Epifanes Polyurathane Clear Gloss<br />
Varnish.<br />
Epifanes Rapidcoat<br />
Offers a quick and easy wood protection without<br />
the hassle of sanding between coats. It is lightly<br />
tinted to give a rich, warm colour. Ideal for<br />
renewing weathered areas prior to applying a<br />
varnish system or as a full system for a quick and<br />
easy semi-gloss finish with maximum durability,<br />
UV protection and longevity. Only 5-6 coats<br />
usually required. Simply clean the surface and reapply<br />
when needed.<br />
Epifanes Rapidclear<br />
As Rapidcoat but with a clear finish.<br />
STAR<br />
PRODUCT<br />
Epifanes PP Varnish Extra<br />
(two-component)<br />
Combines fast dry time with excellent impact and<br />
abrasion resistance. Recoat in as little as 3 hours.<br />
Use on all types of interior and exterior wood as<br />
an insulation coat, sealer on woods such as Teak<br />
and Iroco, or filling coat for one or two<br />
component synthetic or polyester based varnish<br />
systems. Use to give maximum UV resistance as a<br />
topcoat with 2 or more coats of Epifanes Clear<br />
Varnish, Woodfinish Gloss or Polyurethane Clear<br />
Gloss Finish.<br />
10<br />
• <strong>Pinmar</strong>
Colours<br />
STAR<br />
PRODUCT<br />
Epifanes Nautiforte<br />
(one-component)<br />
A high gloss finish, based on siliconized alykyd<br />
resins. Provides outstanding weather durability,<br />
long lasting gloss retention, rapid wet film drying,<br />
minimal dirt retention and is non-yellowing. Use<br />
on wood, steel, aluminium and fibreglass. Interior<br />
and exterior applications above the waterline in<br />
combination with appropriate primers or directly<br />
to well degreased and sanded fibreglass. Suitable<br />
for fresh or salt water. White, 24 Oyster and 25<br />
Offwhite.<br />
Cleaners & Coatings<br />
NEW<br />
Epifanes Yacht Enamel<br />
(one-component)<br />
A high gloss, alykyd-based, traditional marine<br />
finish. Very good flowing and covering<br />
properties. Long lasting weather durability and<br />
high gloss retention. Use on wood, steel,<br />
aluminium and fibreglass. Interior and exterior<br />
applications above the waterline in combination<br />
with appropriate primers or directly to well<br />
degreased and sanded fibreglass. Suitable for<br />
fresh or salt water. 45 colours.<br />
Epifanes Polyurethane<br />
Colours (two-component)<br />
A high gloss, polyester saturated, aliphatic<br />
urethane coating with excellent outdoor<br />
durability and water resistance. Application by<br />
brush, roller or spray. Use on wood, steel,<br />
aluminium and fibreglass. Interior and exterior<br />
applications above the waterline in combination<br />
with appropriate primers or directly to well<br />
degreased and sanded fibreglass. Suitable for<br />
fresh or salt water. 20 colours.<br />
Epifanes Nonslip Deckcoating<br />
(one-component)<br />
Semi-gloss, urethane/alkyd based non skid<br />
deckpaint containing measured amount of<br />
polypropylene beads as the nonskip agent. With<br />
appropriate primers, can be used on wood, steel,<br />
aluminium and fibreglass decks. White, cream,<br />
212 and 213 grey.<br />
Epifanes Bilge Paint<br />
(one-component)<br />
A protecting paint for use in bilge spaces, engine<br />
rooms, etc. where a tough paint system is<br />
required. White and grey.<br />
Epifanes Epoxy Primer<br />
(two-component)<br />
An anti-corrosive primer based on an epoxy resin<br />
and zinc phosphate as the anti-rust agent. High<br />
build, high filling capacity and easy sanding. For<br />
use as a filling primer in a two-component polyurethane<br />
paint system on plywood and fibreglass<br />
and as an anti-rust primer in a two-component<br />
polyurethane paint system on steel and<br />
aluminium. For interior and<br />
exterior use above and below the<br />
waterline. White.<br />
NEW<br />
Epifanes Teak-O-Bello<br />
A water based coating for teak and other<br />
hardwoods. This unique, environmentally friendly<br />
formulation prevents the wood from weathering<br />
for an extended period of time. Fast and easy to<br />
apply, it lasts longer than solvent-based teak oils<br />
and sealers and resists the formation of mould.<br />
Will not effect the caulking in teak decks.<br />
Contains no VOCs, no toxic fumes and is solvent<br />
free. Suitable for fresh and salt water. For interior<br />
and exterior use.<br />
Epifanes Teak-O-Clean & Bright<br />
A water based cleaner and brightener for teak<br />
and other tropical woods. Fast and easy to apply,<br />
it restores weathered, grey teak to its original<br />
colour. Will not affect the caulking in teak decks.<br />
Suitable for fresh and salt water. For prolonged<br />
protection from weathering, allow to dry fully and<br />
treat the surface with Epifanes Teak-O-Bello.<br />
<strong>Pinmar</strong> • 11
West System<br />
Why choose West System All epoxies<br />
are not equal. There are big differences<br />
in epoxy formulations. West System<br />
epoxy is designed for boatbuilding and<br />
repair by experienced builders and<br />
formulators who know the engineering<br />
and the chemistry required for today's<br />
high-performance composite<br />
structures. The West<br />
System is the most well<br />
balanced epoxy system<br />
available today.<br />
West System 105<br />
STAR<br />
PRODUCT<br />
The base material of the West System family of<br />
products on which all the possible compounds<br />
are built. The resin is a clear, light amber, low<br />
viscosity epoxy, which, when mixed with one of<br />
the West System hardeners, is formulated to wet<br />
out wood fibre, fibreglass and a variety of metals.<br />
When mixed with the appropriate hardener, it is<br />
an excellent adhesive which will fill gaps and<br />
bridges voids when modified with West System<br />
fillers and can be sanded and shaped when<br />
cured. With roller applications, it possesses<br />
excellent thin-film characteristics by flowing out<br />
and self-levelling without fisheyeing. The epoxy<br />
mix cures to a clear finish so that a natural finish<br />
may be achieved by coating with a good quality<br />
two pack polyurethane varnish. The 105 Resin has<br />
a relatively high flash point and is free from<br />
solvent odours and vapours which makes it safer<br />
to work with than other resins.<br />
For each container size of resin, there is a<br />
corresponding sized container of hardener and<br />
mini pump. When purchasing resin, hardener and<br />
minipumps ensure that all items are labelled with<br />
the same pack size letter (i.e., A, B or C).<br />
Hardeners<br />
There are four West System hardeners, three to<br />
provide working times for almost every kind of<br />
project and one for coating where an extra<br />
special finish is required.<br />
205 Standard Hardener<br />
205 Hardener is used in a majority of situations to<br />
produce a rapid cure and results in an epoxy<br />
which develops its physical properties quickly.<br />
When mixed in the ratio of five parts by weight of<br />
105 Resin to one part by weight of 205 Hardener,<br />
the cured system yields a high-strength, rigid<br />
solid which has excellent cohesive properties and<br />
provides an outstanding moisture vapour barrier<br />
with excellent bonding and coating properties.<br />
Pot Life At 25°C 10 to 15 minutes<br />
Cure To Solid State At 21°C 5 to 7 hours<br />
Cure To Maximum Strength At 21°C. 5 to 7 days<br />
Minimum Recommended Temperature 5°C.<br />
Pumps Required (5:1 ratio) 301, 306, 309<br />
206 Slow Hardener<br />
When this low viscosity curing agent is combined<br />
with 105 Resin in a five part by weight resin to<br />
one part by weight hardener ratio, the cured<br />
resin/hardener mixture yields a high-strength,<br />
rigid, moisture-resistant solid, excellent for use as<br />
a coating and bonding adhesive. Can be used for<br />
extended assembly times when working in ideal<br />
conditions.<br />
Pot Life At 25°C 20 to 30 minutes<br />
Cure To Solid State At 21°C 9 to 12 hours<br />
Cure To Maximum Strength At 21°C 5 to 7 days<br />
Minimum Recommended Temperature 16°C<br />
Pumps Required (5:1 ratio) 301, 306, 309<br />
Special Coating Hardener<br />
207 Special Coating Hardener is formulated for<br />
use with West System 105 Resin for coating<br />
applications where an extremely clear finish is<br />
desired, especially when working in humid<br />
conditions. This hardener also provides excellent<br />
adhesion for bonding applications although 207<br />
is not as cost-effective as 205 or 206 Hardeners.<br />
207 contains an ultraviolet inhibiting additive<br />
which improves the resistance of a West System<br />
105/207 mix to sunlight. However, the cured<br />
epoxy surface still requires long-term UV<br />
protection with a quality marine paint or a UV<br />
filtered varnish such as West System 1000<br />
Polyurethane Varnish.<br />
Pot Life At 25°C 20 to 30 minutes<br />
Cure To Solid State At 21°C 9 to 12 hours<br />
Cure To Maximum Strength At 21°C 5 to 7 days<br />
Minimum Recommended Temperature 16°C<br />
Pumps Required (3:1 ratio) 303, 306-3, 309-3<br />
207 and 209 must be mixed in the correct ratio of<br />
3 parts by weight of 105 Resin and 1 part by<br />
weigh of 209 Hardener.<br />
12<br />
• <strong>Pinmar</strong>
209 Special Tropical Hardener<br />
Formulated for use with West System Brand 105<br />
Resin in extremely warm and/or humid<br />
conditions for general bonding and coating<br />
applications, or when extended working time is<br />
desired at room temperature. (between 18°C and<br />
21°C). A 105/209 mix provides approximately<br />
twice the pot life and working time of 206 Slow<br />
Hardener and adequate pot life up to 43°C.<br />
Forms a clear amber coloured solid with good<br />
physical properties and moisture resistance for<br />
bonding and coating applications.<br />
Pot Life At 25°C 75 to 90 minutes<br />
Cure To Solid State At 25°C 20 to 24 hours<br />
Pot Life At 35°C 20 to 30 minutes<br />
Cure To Solid State At 35°C 6 to 8 hours<br />
Cure To Maximum Strength At 21°C. 4 to 9 days<br />
Minimum Recommended Temperature 18°C<br />
Pumps Required (3:1 ratio) 303, 306-3, 309-3<br />
High Density Fillers<br />
403 Microfibres<br />
A blend of cellulose cotton fibres, used as a<br />
general purpose thickening additive for bonding<br />
applications. Epoxy thickened with microfibres<br />
provides good wetting out of the substrate and<br />
excellent gap filling properties. Add 4% to 16%<br />
by weight of 403 to West System epoxy mix.<br />
Colour: off-white.<br />
404 High Density Filler<br />
A filler developed to maximise bond strength in<br />
hardware bonding where high cyclic loads are<br />
anticipated. It can also be used for filleting and<br />
gap filling applications. May be added to the<br />
resin/hardener at a rate of 35 to 60% by weight,<br />
depending on the viscosity needed.<br />
Colour: off white.<br />
405 Filleting Blend<br />
Consists of a mix of cellulose fibres and other<br />
fillers for use in filleting applications when a<br />
natural finish interior is intended. Alcohol or water<br />
based stains may be added to adjust the colour.<br />
Add 15% to 25 % by weight to the epoxy mix.<br />
Colour: tan.<br />
406 Colloidal Silica<br />
Thickening additive suitable for bonding, gap<br />
filling and filleting. It can be used to prevent resin<br />
flow on vertical and overhead surfaces and to<br />
control the viscosity of the epoxy. Often used in<br />
combination with other fillers to control the<br />
working characteristics of an epoxy mix, e.g.<br />
improve consistency of fairing compounds, or<br />
abrasion resistance etc. Add 2% to 10% by<br />
weight to resin/hardener mix. Colour: off white.<br />
Low Density Fillers<br />
407 Low-Density Filler<br />
A blended microballoon based filler<br />
used to make fairing putties which<br />
are easy to sand but still reasonably<br />
strong on a strength to weight basis. Add 20 to<br />
40% by weight to mixed West System epoxy.<br />
Cures to a dark reddish brown colour.<br />
410 Microlight<br />
This is the ideal low density filler for creating a<br />
light, easily worked fairing compound especially<br />
suited for large areas. It’s easily blended into the<br />
epoxy mix at additions between 7% to 16% by<br />
weight and when cured is easier to sand than any<br />
other filled system. Holds a feather edge, and is<br />
more cost effective then other fillers. It is not<br />
recommended to overcoat epoxy/410 mixes with<br />
dark coloured paints. Cures to a tan colour.<br />
Additives<br />
STAR<br />
PRODUCT<br />
420 Aluminium Powder<br />
Add between 5 to 10% by volume to provide<br />
protection from ultraviolet light in areas which<br />
will not be protected with other coatings and as a<br />
base for subsequent painting. Will substantially<br />
increase the hardness of the coated surface.<br />
421 Fire Retardant<br />
421 is a fine white powder added to the epoxy in<br />
the ratio of one to one by weight. The cured<br />
material is a fire retardant composition for use in<br />
engine or galley areas. Will greatly increase the<br />
viscosity of the epoxy and the composition<br />
requires trowelling or squeegeeing into place.<br />
422 Barrier Coat Additive<br />
A proprietary blend designed to improve the<br />
STAR<br />
PRODUCT<br />
moisture exclusion effectiveness of West System<br />
epoxy. 422 also increases the abrasion resistance<br />
and is an excellent additive for providing a barrier<br />
coating to help prevent gelcoat blistering. Add 20<br />
to 25% by weight of 422 to the mixed epoxy.<br />
423 Graphite Powder<br />
A fine black powder added to West System epoxy<br />
(10% by volume) to produce a low friction<br />
exterior coating with increased scuff resistance,<br />
durability and mar resistant. Epoxy/graphite is<br />
commonly used as a coating on rudders and<br />
centreboards or on the bottoms of racing craft<br />
that are dry sailed. The epoxy/ graphite mix can<br />
also be used in teak deck construction to<br />
simulate traditional seams in appearance and to<br />
protect the resin from sunlight.<br />
423 Graphite Powder<br />
A fine black powder added to West System epoxy<br />
(10% by volume) to produce a low friction<br />
exterior coating with increased scuff resistance,<br />
durability and mar resistant. Epoxy/graphite is<br />
commonly used as a coating on rudders and<br />
centreboards, or on the bottoms of racing craft<br />
that are dry sailed. The epoxy/ graphite mix can<br />
also be used in teak deck construction to<br />
simulate traditional seams in appearance and to<br />
protect the resin from sunlight.<br />
425 Copper Compound<br />
425 Copper Compound can be added to the<br />
mixed epoxy to provide a base coat for<br />
conventional bottom paint. When added to the<br />
epoxy at the rate of 80% by weight, the resultant<br />
hard surface increases the moisture exclusion<br />
effectiveness, abrasion resistance and provides<br />
some back up antifouling properties. Can be used<br />
for any coating application when a harder surface<br />
is required, eg. coating moulds.<br />
Pigments 501-506<br />
Pigments can be added to the epoxy to provide a<br />
base colour for a final finish system. The coloured<br />
surfaces also tend to highlight flaws and<br />
imperfections. Pigments should be added at a<br />
rate of approximately 3 to 5 % by weight and<br />
should only be added to the final coat of epoxy.<br />
Available in white, black, blue and grey.<br />
<strong>Pinmar</strong> • 13
SEAJET<br />
Only the best paints will keep the<br />
topsides bright and the bottom clean.<br />
Seajet products are for boat owners<br />
who are passionate about keeping their<br />
boats in good order.<br />
Antifouling<br />
033 Shogun Plus (self<br />
polishing co-polymer<br />
technology)<br />
033 Shogun Plus represents great value for<br />
money with award winning performance. Just<br />
apply two roller coats for two seasons protection.<br />
Shogun Plus is suited to all hull types, except<br />
aluminium. There are six colour choices available.<br />
034 Emperor (self polishing copolymer<br />
technology)<br />
034 Emperor contains a new anti-slime formula<br />
and offers great performance on all hull types,<br />
including aluminium.<br />
Emperor performs well in all fouling conditions<br />
and will work just as well at speeds of up to 40<br />
knots. The new anti-slime formula will repel algae<br />
and slime, so often found in estuaries and<br />
marinas.<br />
With no risk of galvanic corrosion on aluminium<br />
hulls or props, Emperor will appeal to both motor<br />
and sail boat owners alike and can last for up to<br />
two years with the correct application. Due to the<br />
formulation, the six colour choices will remain<br />
strong and bright looking on your hull.<br />
036 Speed Finish<br />
Seajet Speed Finish is an environmentally friendly<br />
alternative to antifoulings with the following<br />
benefits:<br />
- Keeps the underwater hull ultra-smooth and<br />
minimises hull friction for faster sailing and<br />
racing.<br />
- Provides up to 3-years protection against<br />
fouling in both fresh and salt water environments.<br />
- Contains no biocides and is not harmful to<br />
marine organisms.<br />
- Fouling may loosely attach but is easily removed<br />
by water movement or washing.<br />
- Brilliant colours available when applied over<br />
Seajet Speed Binder Coat.<br />
037 Coastal<br />
Seajet 037 Coastal is a hard, tin-free antifouling<br />
paint suitable for all types of pleasure craft<br />
Advantages include<br />
- Suited to all vessels, from yachts to fast<br />
motorboats<br />
- Eco-sensitive and meets all environmental<br />
requirements.<br />
- Good performance in coastal and inland waters<br />
and at an economical price.<br />
- Suitable for drying moorings.<br />
STAR<br />
PRODUCT<br />
039 Platinum (self polishing<br />
co-polymer technology)<br />
039 Platinum offers ultimate performance. By<br />
applying the appropriate amount of coats as<br />
required, Seajet’s Platinum antifoul can give up to<br />
three years protection in all fouling conditions.<br />
This product has been developed for serious<br />
racers, superyachts and blue water cruisers who<br />
demand ultimate performance over extended<br />
periods of time. Four colours are available.<br />
Pellerclean<br />
Supplied as a boxed set, Pellerclean provides the<br />
ultimate protection against the harmful effects of<br />
weed, barnacles and fouling attaching itself to<br />
boat props, engines and stern gear.<br />
Pellerclean is a transparent silicon based product,<br />
resulting in an ultra slippery, non-stick surface,<br />
which weed and fouling find difficult to adhere<br />
to. Can be used on bronze, aluminium or plastic<br />
surfaces, for sail and motor<br />
Primers<br />
011 Underwater Primer<br />
Quick drying and suitable for all hull types,<br />
Seajet’s 011 primer is a perfect multi purpose<br />
product that will act as a primer before applying<br />
fresh antifoul, or as a binder coat, for older<br />
surfaces or where you may not know what<br />
antifoul had been applied in the past.<br />
117 Underwater Primer<br />
Seajet 117 provides a tough, abrasion resistant,<br />
anticorrosive barrier coat for all surfaces. it is an<br />
ideal high performance primer for the discerning<br />
boat owner.<br />
Advantages include:<br />
• Prevention against gel-coat osmosis blistering<br />
below water<br />
• Suited for keels and excellent protection for<br />
steel and aluminium<br />
• Suitable for above water areas<br />
• An ideal first coat for fibre-glass.<br />
118 Ultra-Build Epoxy Primer<br />
Suitable for all areas and all hull types, particularly<br />
steel, 118 Ultra-Build primer can also protect<br />
against gel coat blistering. This is a high-build<br />
product with a tough and durable finish, where<br />
fewer applications are required.<br />
14<br />
• <strong>Pinmar</strong>
SNAPPY<br />
Teak refinishing, cleaning and<br />
waterproofing products.<br />
Refinishing Products<br />
STAR<br />
PRODUCT<br />
Cleaning Products<br />
Snappy Teak Nu<br />
Restoring neglected, weathered teak is not a fun<br />
project. It usually involves hours of sanding<br />
while you're on all fours wishing your were<br />
somewhere else. Snappy Teak Nu has a better<br />
idea. The Teak Nu two-step, Formula 1 and<br />
Formula 2 chemical process removes gray mildew<br />
stains, oil, fuel and fish blood stains without<br />
softening deck seams.<br />
Teak treated with Teak Nu has the warm golden<br />
glow of freshly sanded wood – without hours of<br />
sanding.<br />
Snappy Hull Cleaner<br />
Cleans water lines with ease both in and out<br />
of the water.<br />
Removes yellowing. Can even be used to<br />
clean other tough hull stains.<br />
Snappy Marine Polish with Teflon<br />
A polish, wax and sealant, all in one.<br />
Lasts 4-5 times longer than regular wax.<br />
Leaves a slippary Teflon surface.<br />
Snappy Sealer<br />
Snappy Sealer gives your teak a rich golden<br />
colour that not only protects your teak but lasts<br />
and lasts throughout the entire boat season.<br />
* Prevents greying and weathering<br />
* Once a year treatment<br />
* Seals to prevent staining<br />
Snappy Black Streak Remover<br />
Removes those ugly black lines caused by<br />
running water Without removing wax.<br />
* UV Protection and easy to apply.<br />
Before<br />
After<br />
SNAPPY<br />
<strong>Pinmar</strong> • 15
SHURHOLD<br />
“One Handle Does it All!”<br />
Handles<br />
Shurhold’s exclusive SHUR-LOK quick release<br />
system positively locks any Shurhold handle<br />
quickly and easily with all Shurhold accessories.<br />
Attachments never spin or pop off during use.<br />
Telescopic Handles<br />
43” to 72” and 63” to 108”<br />
Lightweight Fixed Lengths<br />
13”, 30”, 40” and 60”<br />
Fixed Length with finger grip<br />
various products, 30” and 60”<br />
Brushes<br />
Special Application Brushes<br />
For windows, hulls, wheels and other hard to<br />
reach places.<br />
Swivel Pad & Scrubbers<br />
Dip & Go<br />
Universal non abrasive swivel pad packed with<br />
concentrated Simple green tm (revills available)<br />
Rayon String Mop<br />
Ideal for general purpose maintenance.<br />
Soft ‘n’ Thirsty Mop<br />
Super absorbent.<br />
STAR<br />
PRODUCT<br />
The hammerhead<br />
The Hammerhead is the only marine brush<br />
specifically developed for use by hand or with a<br />
handle.<br />
Scrubber Pads<br />
Fine, medium and coarse grades. Available in bulk<br />
quantities.<br />
Mops and Brooms<br />
Deluxe “Water Sprite” Mop<br />
Our top of the range mop to be used when<br />
nothing but the best will do!<br />
Angled Floor Broom<br />
Lightweight for general purpose sweeping. Flared<br />
bristles for hard to reach places.<br />
Deck Brushes<br />
Flared bristles and jagged edge design from extra<br />
soft to stiff.<br />
Cotton String Mop<br />
Ideal value mop.<br />
Super Floor Mop<br />
Wrings out quickly and easily. Refill heads<br />
available.<br />
16<br />
• <strong>Pinmar</strong>
Boating & Fishing<br />
Adapters & Extensions<br />
Super Sponge<br />
Extra large, easy to hold design.<br />
Boat Hook<br />
Exclusive 3 in 1 Shurhold design<br />
30” Extension<br />
Adds 30” to any handle<br />
Threaded Adapter<br />
Compatible with most internally threaded<br />
products.<br />
Bug & Tar Remover<br />
Non abrasive mesh covered sponge.<br />
Landing Net<br />
17 x 20 x 30” with treated nylon netting<br />
10” Curved Adapter<br />
Adds a 30-degree angle to any of our SHUR-LOK<br />
equipped accessories. Two holes at the end<br />
provide for 180-degree rotation.<br />
Hand Held Tools<br />
Microfibre Towels<br />
3 Pack - 1x soft, 1 x extra strong & 1x lint free.<br />
Crab Net<br />
12” x 13” x 15” with treated nylon netting.<br />
Shrimp & Shad Dip Net<br />
17 x 20 x 30” with fine mesh netting<br />
Gaff Hook<br />
One piece stainless steel, with safety spring guard<br />
Squeegees<br />
Dip & Scrub Brushes<br />
In compact and long handled designs.<br />
Scrub Brush<br />
With comfort handle and safety bumper.<br />
Utility Brush<br />
Includes unique spot scrubber on handle.<br />
Detailing Brush<br />
Medium stiffness. Perfect for detailing teak!<br />
PVA Towels and Sponges<br />
Absorbs 50% more than natural chamois.<br />
Extra large size: 17” x 27”<br />
Snap and Zipper Lubricant<br />
45 oz tube lubricates and protects in one easy<br />
application<br />
Maintenance Kits<br />
A great way of purchasing all you need for<br />
maintenance in one easy pack. Available for<br />
marine and RV specific purposes.<br />
Marine Kit (Deluxe)<br />
Includes:<br />
6’ Telescopic Extension Handle<br />
6” Soft Deck Brush<br />
Soft ‘n’ Thirsty<br />
3 in 1 Boat Hook<br />
10” Curved Adapter<br />
PVA Towel<br />
Snap-Stick .45oz Tube<br />
RV Kit (Deluxe)<br />
Includes:<br />
6’ Telescopic Extension Handle<br />
10” Soft Brush<br />
Super Floor Mop<br />
Dip And Go<br />
Angled Floor Broom<br />
16” Stainless Steel Squeegee<br />
PVA Towel & PVA Sponge<br />
Snap-Stick .45oz Tube<br />
Squeegees<br />
Stainless steel, and streak free! 8”, 10”, 12”, 16” & 24”<br />
available.<br />
Hose Nozzle<br />
t has a die-cast zinc body with a soft black vinyl<br />
grip - comfortable to hold and durable, an allbrass<br />
valve stem and permanent adjusting nut,<br />
and includes a hold-open clip and stainless steel<br />
spring.<br />
<strong>Pinmar</strong> • 17
SABA<br />
Bonding and sealing<br />
products for teak decks<br />
For decades, Saba has been selling<br />
bonding and sealing products for the<br />
shipbuilding and yachtbuilding<br />
industry. Many professional<br />
shipbuilders and yachtbuilders make<br />
use of our products. All over the world,<br />
Saba products are used to build the<br />
biggest luxury yachts with the highest<br />
quality standards. No suprise that<br />
among our references are some of the<br />
world's top 100 yachts.<br />
Sealants<br />
SABA Sealer 211C<br />
Saba Sealer 211C is a two component,<br />
permanently elastic sealant, based on<br />
polysulfide. Saba Sealer 211C is very suitable for<br />
sealing joints in teakwood ship decks. Resistant<br />
to fresh water, sea water, oil, grease, fuel, and<br />
cleansing agents - Nice and tight appearance -<br />
Excellent and permanent adherence to teakwood<br />
- Durable and maintenance-free - Permanently<br />
elastic - No formation of bubbles in the joints.<br />
Deckfast MS<br />
Deckfast MS is a one-component sealant for<br />
general use. Deckfast MS is very well suited for<br />
bonding teak decks on boards of yachts.<br />
Excellent adherence to teakwood on ship decks<br />
and bonding zones of several materials. - Long<br />
application time: approx. 60 minutes. Continuous<br />
elastic - No shrinkage - Resistant to sea water<br />
and aging - Contains no solvents.<br />
SABA Seal One Fast<br />
Saba Seal One HM is a one component sealant<br />
with low module. Saba Seal One Fast is<br />
especially suitable for sealing teak ship decks -<br />
Excellent aging resistance - No bubble formation<br />
during polymerisation - Less formation of hollow<br />
seams - Easy to sand due to harder rubber.<br />
18<br />
• <strong>Pinmar</strong>
Underwater Lights<br />
Custom built and installed systems for boats of all sizes<br />
Bitter End Hatteras Rendezvous photo by Erik Skallerup<br />
Why choose Sea Vision<br />
• Sea Vision are well proven and<br />
tested products using the highest<br />
quality materials available.<br />
• Manufacturers of the original<br />
underwater light.<br />
• Large aperture for increased light<br />
output.<br />
• Lights are Lloyd’s and ABS type<br />
approved, as well as UL recognized<br />
component mark rated and CE<br />
certified where applicable.<br />
• Not susceptible to vibration damage<br />
• Lights for every size of boat and type<br />
hull material.<br />
• Competitive prices.<br />
• Sea Vision’s many years experience in<br />
the lighting industry allow them to<br />
continue with product development<br />
to provide the most technologically<br />
advanced underwater light available<br />
on the market today.<br />
<strong>Pinmar</strong> • 19
TOUBOIS<br />
Toubois was founded in 1942 and now<br />
has a team of professionals in the wood<br />
industry with recognised know-how in<br />
the field and offers you solutions for all<br />
your projects.<br />
DIVIBOIS<br />
NAUTIPARQUET<br />
For the interior decks of boats.<br />
1 mm veneer assembled as strip deck on an<br />
Okoume plywood support.<br />
Width of battens : 7 cm<br />
Using hardwoods from its forest<br />
plantations in Gabon, the company<br />
manufactures and develops more than<br />
600.000m2 of it’s range of special,<br />
technical and decorative plywood.<br />
Iroko<br />
Teak<br />
NAUTIBOIS and<br />
ANTIFRACTURE<br />
Thin plywood panels which can be used in all<br />
boat yards for making the principal elements of a<br />
boat.<br />
Multi-layer panels for hulls, structures, bridges<br />
and boat fittings.<br />
Panels in long lasting peeled tropical wood with<br />
1,3 mm thick surfaces, ensuring the durability of<br />
the panel, its high mechanical resistance and its<br />
low distortion in dimension<br />
NAUTIDECOR<br />
TOUBOIS is the specialist for the manufacture of<br />
sandwich panels using PVC foam for the core<br />
which reduces weight without sacrificing quality.<br />
This product enables construction to be<br />
improved by reducing the weight by up to 80 %<br />
compared to plywood and increasing the<br />
performance of boats. The insulation<br />
Constant insulation values<br />
• Fire classification M1 ;<br />
• Does not include any Freon gas<br />
• Resistant to hydrocarbons, alkalis, diluted acids,<br />
methyl alcohol, sea water, petrol and diesel<br />
fuel, and can be used with polyester, vinylester<br />
and epoxy resins, contains no CFCs.<br />
Teak<br />
Mahogany<br />
Makore - Moabi Cherry<br />
Wenge<br />
STRATIPONT<br />
Bird’s eye Maple<br />
NAUTISTRAT<br />
Cherry<br />
Interior decks of boats. Imitation deck decor. This<br />
laminate panel is an excellent solution for wet<br />
areas in the boat : kitchen, bathroom.<br />
It is also recommended for hire boats because of<br />
its ease of maintenance and wear resistance.<br />
Okoume marine ply with an 0,8 mm laminate on<br />
both sides.<br />
Nautidecor is used for the internal fitting out and<br />
decoration of pleasure boats, and it supplies the<br />
richness and warmth of wood (quarters, kitchens,<br />
bunks and bathrooms).<br />
These panels can be cut by digital controls in<br />
accordance with a detailed drawing.<br />
Marine multiply (Okoume or similar) re-veneered<br />
on 2 sides with a cut veneer 0,6 mm<br />
For the interior fitting out of boats (kitchen units<br />
shelving, bathrooms, etc .<br />
Okoume marine panels re-veneered on both<br />
sides with white laminate.<br />
STAR<br />
PRODUCT<br />
STR 1 STR 2<br />
STAR<br />
PRODUCT<br />
Ceiling V groove on 1<br />
face, Makore 0,6 mm<br />
Teak 0,6mm<br />
STR 3<br />
20<br />
• <strong>Pinmar</strong>
SOLID TEAK NAUTIPONT<br />
For the manufacture of internal and external boat<br />
decks, swimming pool surrounds, terraces,<br />
balconies or bathroom fittings.<br />
Slats of solid teak 7 mm thick connected together<br />
by black polyurethane joints for a perfect seal.<br />
This flexible panel can be used for curved<br />
sections.<br />
Width of slats : 41 mm<br />
STAR<br />
PRODUCT<br />
Solid Teak,<br />
Rubber Listels<br />
Solid Teak,<br />
Rubber Listels<br />
NAUTIPONT<br />
For the manufacture of interior flooring for boats.<br />
1 mm thick veneer and including wooden inlay<br />
(either black or white strips), rubber inlay (non<br />
slip and hard wearing) or silicon inlay.<br />
Width of inlay : 5 mm<br />
Distance between inlay : 50 mm<br />
DECORATIVE<br />
COMPOSITE PANELS<br />
Teak, black inlay<br />
Teak, white inlay<br />
Makore, white inlay<br />
Maple, black inlay<br />
Makore, black inlay<br />
Teak, 3mm groove no<br />
inlay Parquet Finish<br />
Decorative Composit Panels, to meet all your<br />
technical requirements which offer:<br />
* Sound proofing<br />
* Thermal insulation<br />
* Anti-vibratory<br />
* Waterproof<br />
* Fireproof<br />
* Vapour Barrier<br />
* X-rays<br />
<strong>Pinmar</strong> • 21
Sika<br />
Ensuring Durability with<br />
Watertight Solutions.<br />
Sika's high-performance products are extensively<br />
used in today's marine industry for shipbuilding<br />
and professional repair solutions. The<br />
outstanding product line covers all caulking,<br />
levelling, bedding, sealing, bonding, glazing and<br />
accoustical flooring requirements and is<br />
Wheelmark-Approved by the leading Certification<br />
Societies.<br />
Sika's structural adhesives and sealants can<br />
replace labour intensive welding systems, do<br />
away with cumbersome screwing and rivetting<br />
systems and are able to bond and simultaneously<br />
seal numerous substrates of various types such as<br />
steel, aluminium, GRP, wood, teak, painted<br />
substrate, plastic, stone, marble, glass and other<br />
difficult-to-bond substrates.<br />
For timber and teak decks that need to be<br />
completely watertight and weather-resistant, Sika<br />
have developed Sikaflex-290 DC. This extremely<br />
easy-to-use, Hi-UV-resistant, one component<br />
polyurethane deck-caulking compound can, once<br />
cured, be flush-sanded with the deck to supply a<br />
beautifully neat, clean finish.<br />
Sika's Marine Teak Deck Maintenance System<br />
preserves and cares for new and weathered<br />
teakwood as well as for all other kinds of wood<br />
applied above the waterline. Sikaflex-290 DC and<br />
Sikaflex-298 are major elements of Sika's Totally<br />
Glued Teak Decking System.<br />
Sikaflex®-291 / 291 LOT<br />
Glazing of Glass Windows<br />
and Panels<br />
Successful bonding of organic "glass" panels and<br />
of safety, laminated and insulation mineral glass<br />
windows requires a UV-resistant adhesive with a<br />
high degree of elasticity. To ensure that thermal<br />
movements in between the flange and the pane<br />
are absorbed progressively without undue buildup<br />
of stresses, the use of Sikaflex-295 UV for<br />
organic and Sikaflex-296 for mineral glass is a<br />
must.<br />
Sikaflex®-296<br />
Sikaflex® and SikaFast®<br />
Adhesive Bonding<br />
Joints that are subject to extreme dynamic<br />
stresses require a long lasting, high strength,<br />
structural, yet elastic adhesive exhibiting good<br />
gap-filling properties. Sikaflex-292, SikaFast-3161<br />
and SikaFast-5211 are excellent examples of<br />
products with shock absorbing and vibration<br />
dampening properties highly capable of meeting<br />
the requirements of a punishing marine<br />
environment.<br />
Sikaflex-291<br />
A one-component, low viscous, medium modulus,<br />
polyurethane-based sealing/adhesive compound<br />
exhibiting various cure rate characteristics. This<br />
all-purpose grade is used for general sealing<br />
applications.<br />
Marine Caulking and Teak<br />
Decking Systems<br />
Sikaflex®-290 DC / 290 DC SL<br />
(Booster)<br />
A fast-curing, one-component, flexible, highperformance<br />
polyurethane-based adhesive for<br />
bonding windows and portholes. Sikaflex®-296 is<br />
suitable for all types of mineral glass. Its high<br />
degree of UV resistance also allows the use of the<br />
system as a weatherproof sealant (back filling).<br />
Sikaflex®-295 UV / 295 UV LOT<br />
With its outstanding resistance to weathering and<br />
seawater, Sikaflex-291 is the perfect all-rounder;<br />
an all-purpose flexible marine sealant that bonds<br />
extremely well to all standard materials used in<br />
boat and ship construction. Its noteworthy<br />
elasticity ensures a durable long-lasting seal able<br />
to hold off water, dust, dirt, air, gaes, etc.<br />
STAR<br />
PRODUCT<br />
A one-component, elastomeric deck caulking<br />
compound which exhibits high UV resistance,<br />
shows excellent sandability and is specially<br />
designed to caulk teak decks. The cure rate of the<br />
Sikaflex-290 DC product line can be accelerated<br />
by employing Sika's proprietary Booster System.<br />
A fast-curing, one-component, flexible, highperformance<br />
polyurethane-based adhesive for<br />
bonding and sealing of windows and portholes.<br />
Sikaflex®-295 UV is suitable for all types of<br />
organic (PC, PMMA) window panes.<br />
STAR<br />
PRODUCT<br />
22<br />
• <strong>Pinmar</strong>
Bedding - shock and noise<br />
absorption onboard Ships<br />
Both products combine the necessary elasticity<br />
with exactly the right consistency for maintaining<br />
the required bondline thickness and for adequate<br />
bridging of the tolerances. The UV-resistant<br />
properties of these Sikaflex sealant/adhesive<br />
products warrant endurance of the system as a<br />
back filler and bondline adhesive simultaneously.<br />
SikaTransfloor®-352 ST / 352<br />
SL / 352 VSL<br />
A two-component, polyurethane-based<br />
compound used for the levelling of uneven decks<br />
prior to the application of the teak deck.<br />
represents a low-viscous, yet thixotropic, fullbodied<br />
adhesive that has been specially<br />
formulated for the waterproof flexible bonding of<br />
timber strip decking, of plastic and textile deckand<br />
wall-coverings, of sandwich and<br />
prefabricated timber deck panels, of stone,<br />
marble and granite tiles, etc .<br />
Sikaflex®-292<br />
The product is used for a wide range of bonding<br />
applications, deck-to-hull bonding, bedding of<br />
chainplates, through-hull fittings, toe rails, etc.<br />
STAR<br />
PRODUCT<br />
Sikaflex®-298 ST / 298 SL / 298<br />
FC<br />
A one-component self-levelling bedding and<br />
bonding adhesive with very high adhesion<br />
properties. The product is easily spreadable with<br />
extended open time for large working areas.<br />
The permanent elastic layer of cured Sikaflex-298<br />
supplies a cushioning effect, absorbs shock and<br />
minimizes transmission of impact sound.<br />
Cleaners<br />
Cleaner-205/5<br />
This transparent, clear cleaner is a low viscosity<br />
liquid specifically formulated for the pretreatment<br />
of bond faces in direct glazing prior to<br />
application of Sikaflex ® polyurethane adhesives.<br />
It gives improved adhesion on glass or ceramic<br />
coated screens.<br />
Important note: Sika ® Cleaner-205/5 contains<br />
isopropanol which may dull the surface finish of<br />
some freshly applied paints. Preliminary trials<br />
should be carried out. If accidentally splashed<br />
onto adjacent surfaces, wipe off immediately with<br />
a clean, dry cloth. Never apply to porous<br />
substrate.<br />
A one-component, thixotropic, high modulus,<br />
structural, polyurethane-based adhesive system.<br />
<strong>Pinmar</strong> • 23
INTERNATIONAL<br />
Our market leading antifouling range<br />
includes a product to suit your<br />
individual requirements, no matter<br />
where you sail your boat.<br />
Eroding Antifoulings<br />
Micron® Optima<br />
The ultimate performer in eroding antifoulings.<br />
Includes revolutionary activator and new resin<br />
system for unparalleled effectiveness over a full<br />
season. Solvent free for easier clean-up.<br />
Micron® Extra<br />
Micron® Extra is a high strength polishing<br />
antifouling, that provides two seasons<br />
performance, even in difficult fouling conditions.<br />
Formulated with Biolux® Technology for<br />
controlled optimised biocide release. Micron®<br />
Extra does not contain organotin biocides and<br />
complies with the IMO Antifoulings Systems<br />
Convention (AFS/CONF/26) – Lloyds Register<br />
certificate number MNDE/2002/1216<br />
Hard Antifoulings<br />
Trilux<br />
New medium performance, hard antifouling<br />
suitable for all substrates including aluminium.<br />
Offers protection in medium fouling conditions<br />
where a hard, scrubbable antifouling is required.<br />
Containing Teflon® it provides a smooth, hard,<br />
slippery surface which deters fouling attachment,<br />
and can be burnished. Ideal for fast powerboats<br />
and craft on dry moorings.<br />
Interspeed Ultra<br />
No longer just extra strong, a new, improved<br />
formula makes this superior antifouling ultra<br />
strong. Can be burnished. Contains Biolux which<br />
is exclusively available in antifoulings from<br />
International. . Containing Teflon® it provides a<br />
smooth, hard, slippery surface which deters<br />
fouling attachment, and can be burnished. Ideal<br />
for fast powerboats and craft on dry moorings<br />
Thin Film Antifoulings<br />
Professional Series<br />
Antifoulings<br />
STAR<br />
PRODUCT<br />
Micron® 66<br />
Micron® 66 is a true Self-Polishing Copolymer<br />
(SPC) Superyacht antifouling that delivers the<br />
same outstanding level of protection as TBT SPC<br />
antifoulings, but without the negative<br />
environmental impact of tin. Based on Biolux®<br />
SPC technology, unique to International Paint,<br />
Micron® 66 lasts for two seasons and beyond and<br />
even protects over prolonged stationary periods.<br />
Micron® 66 maximises speed and fuel efficiency<br />
because it smoothes continuously minimising<br />
drag through the water.<br />
Trilux 33<br />
Trilux 33 is a brand new tin-free antifouling for<br />
professional applications, which replaces<br />
Superyacht 800. It offers effective protection for<br />
aluminium & is the ideal choice where a bright<br />
white or bright coloured antifouling is required.<br />
Containing Teflon® it provides a smooth, hard,<br />
slippery surface which deters fouling attachment,<br />
and can be burnished. Ideal for fast powerboats<br />
and craft on dry moorings.<br />
Cruiser Uno<br />
General purpose eroding - provides economical<br />
protection in difficult fouling conditions. Low<br />
build up of paint due to eroding technology.<br />
VC® 17m Extra<br />
VC®17m Extra is a hard, high performance<br />
antifouling with Teflon® that maximizes speed<br />
and fuel efficiency, making it the ideal choice for<br />
racing yachts, power boats and active craft.<br />
Available in graphite, bright white and fluorescent<br />
orange (for safety markings)<br />
VC®17m Extra graphite is not suitable for use on<br />
aluminium alloys and zinc sprayed surfaces<br />
VC® Offshore with Teflon<br />
VC® Offshore is the ultimate high strength<br />
antifouling with Teflon®. It dries to a smooth,<br />
hard, scrubbable finish, ideal for racing and<br />
sailing. VC® Offshore was chosen by some of the<br />
leading contenders for the Volvo Ocean Race<br />
2001/2. Teflon® is EXCLUSIVELY available in<br />
antifoulings from International.<br />
24<br />
• <strong>Pinmar</strong>
Finishes<br />
Varnishes<br />
Perfection<br />
High Performance Polyurethane<br />
Gloss finish - The ultimate in performance,<br />
combining excellent chemical and abrasion<br />
resistance with superb gloss and colour retention.<br />
UV filters combine with the chemical cure to give<br />
the longest possible life.<br />
Schooner Premium Varnish<br />
Premium varnish - High Gloss - A traditional tung<br />
oil based yacht varnish for classic yachts.<br />
Schooner contains UV absorbers for a long lasting<br />
finish, and its easy to brush full bodied<br />
formulation gives a deep rich gloss.<br />
Toplac®<br />
Premium High Durability Marine Gloss Enamel -<br />
Toplac is a premium gloss marine enamel for all<br />
substrates for use above the waterline. It is<br />
exceptionally easy to apply by brush or roller and<br />
pad and contains UV filters for increased<br />
durability.<br />
Original<br />
Full Gloss Yacht Varnish - A traditional yacht<br />
varnish with high UV resistance. Features include<br />
excellent flexibility, ease of application, good<br />
gloss retention, and non blooming qualities.<br />
Interlux® Super<br />
Premium High Durability Marine Gloss Enamel -<br />
Toplac is a premium gloss marine enamel for all<br />
substrates for use above the waterline. It is<br />
exceptionally easy to apply by brush or roller and<br />
pad and contains UV filters for increased<br />
durability.<br />
Goldspar®<br />
This internationally renowned varnish results in a<br />
full gloss polyurethane finish. It is easy to use and<br />
dries quickly making it ideal when fast<br />
overcoating is necessary. A hard varnish that is<br />
abrasion resistant its versatility means it can be<br />
used over existing varnish.<br />
Goldspar® also features a new improved formula<br />
incorporating enhanced UV filters.<br />
Primers<br />
Goldspar® Satin<br />
Tough and abrasion resistant, UV resistant and<br />
fast drying, Goldspar® Satin offers the same<br />
features as its gloss counterpart but dries to a<br />
beautiful satin finish<br />
Primarily for interior use.<br />
Interprotect<br />
High Performance Protection for Steel, Aluminium<br />
and Wood - Quick drying, easy to apply, epoxy<br />
primer for high performance protection.<br />
<strong>Pinmar</strong> • 25
ANZA A brush for every<br />
occasion<br />
Frames & Rollers<br />
Anza has, we believe, the most comprehensive<br />
range of paint application products for all<br />
surfaces. They are made from high quality<br />
materials and ideal for both amateur and<br />
professional sailors. Here we show examples of<br />
some of the best sellers.<br />
Brushes<br />
Maxi Frame 2K<br />
Two component handle. 18 cm Ø 8 mm.<br />
STAR<br />
PRODUCT<br />
Anza 2000<br />
Paint and varnish brush with synthetic filaments<br />
having soft and treated tips. Gives a smooth<br />
finish.<br />
Maxi Frame PP<br />
Plastic handle. 18 cm Ø 6 mm.<br />
Anza Elite<br />
STAR<br />
PRODUCT<br />
Paint and varnish brush fitted with an<br />
ergonomically designed, two component handle<br />
and a brush rest. A mixture of synthetic filaments<br />
and natural bristles gives good results from both<br />
oil and water based materials.<br />
Mini Frame Short 2K<br />
Frame Length: 30 cm, two component handle<br />
Anza Classic Oval<br />
The classic paint and varnish brush with high<br />
quality natural bristle. Fitted with a two<br />
component handle and a brush rest. Excellent for<br />
oil based paint.<br />
Mini Frame Long 2K<br />
Frame Length: 30 cm, two component handle<br />
Paint and Varnish Brush<br />
Yellow plastic handle. Natural bristles<br />
Mohair Roller<br />
Varnish roller from goat hair. Gives a very smooth<br />
and nice surface with varnish. Suitable for<br />
painting joinery.<br />
Paint Trays<br />
STAR<br />
PRODUCT<br />
Paint and Varnish Brush<br />
Two component handle. Natural bristles<br />
Anlon Roller<br />
All round roller for interior painting. Gives a<br />
medium to coarse texture. 18mm pile.<br />
Paint Trays<br />
10-25 cm. Available in various colours.<br />
Paint and Varnish Brush<br />
Two component handle. Synthetic filaments with<br />
treated tips.<br />
Anza Tray liners<br />
Fit 10 - 25 cm trays<br />
26<br />
• <strong>Pinmar</strong>
Painting Accessories<br />
Paint pad<br />
Complete pad of synthetic fabric with plastic<br />
handle.<br />
Wide filling Knife<br />
Ergonomic with plastic handle.<br />
Paint scraper PP<br />
Ergonomic plastic handle. Either with reversible<br />
tungsten carbide blade (black) or tempered<br />
stainless steel blade (white).<br />
Replacement pad<br />
Paint scraper<br />
For removal of all types of paint. Reversible blade<br />
with an ergonomic polypropylene handle.<br />
www.anza.se<br />
<strong>Pinmar</strong> • 27
3M Marine Products<br />
For boat building, repair and<br />
maintenance professionals.<br />
3M products and systems improve worker safety,<br />
maximise productivity and provide optimal<br />
finished results.<br />
<strong>Pinmar</strong> can supply any 3M product from their<br />
comprehensive range.<br />
Abrasives - Wax and Maintenance - Compounds,<br />
Glazes and Polishes - Cleaning - Tapes and<br />
Masking Systems - Adhesives, Sealants and<br />
Fastening Systems - Safety and Respirators -<br />
Electrical.<br />
Below we highlight some of our best sellers, from<br />
basic abrasive rolls and sheets, the famous blue<br />
Scotch 2090 Long-Mask Masking Tape to Stikit<br />
and Hookit products, adhesives and sealants<br />
safety equipment and ear plugs.<br />
Abrasive Rolls and Sheets<br />
3M Abrasive Rolls<br />
No attachment system. Use by hand, clipped to<br />
tools or self-made boards.<br />
Roll sizes 75mm x 50m, 95mm x50m, 115mm x<br />
50m<br />
3M Abrasive Rolls Dry version<br />
No attachment system.<br />
Roll sizes 115mm x 50m, 120mm x 50m<br />
622 sheets<br />
Designed to offer the user a flexible and<br />
conformable abrasive for general purpose<br />
cleaning, blending, prep work, and finishing.<br />
Stikit and Hookit Products<br />
3M Stikit Hand Blocks<br />
Durable and comfortable to use<br />
Size 79 x 125mm, 70 x 195mm<br />
3M Hookit Hand File Board<br />
Non twisting flat sanding surface.<br />
Size 70 x 390mm<br />
3M Hookit Fairing Boards –<br />
Rigid and Flexible<br />
Rigid for large flat areas, and flexible for curved<br />
areas.<br />
Size 115mm x 75m<br />
3M Hookit Roll<br />
Cut fast, last long and resist loading.<br />
Grits P40 to P100, size 115mm x 25m<br />
Grits P120 to P320, 115mm x 25m<br />
3M Stikit Discs<br />
Pressure sensitive, gold disks, constructed of high<br />
performance aluminium oxide mineral strongly<br />
bonded on a smooth film or a ‘C’ weight backing.<br />
Available plain or 6 holes<br />
Grits P80 to P500, P120 to P400<br />
3M Stikit Discs Accessories<br />
Well balanced, vinyl pads make disks removable<br />
Sizes ø125mm (standard), ø150mm (Standard<br />
Plain, 6 holes, Soft, 6 holes)<br />
ø203mm (Standard plain, 9 holes)<br />
Maximum safe operating speed for ø150mm pads<br />
is up to 7000 RPM and for ø203mm pads<br />
between 1500 and 3000 RPM.<br />
3M Hookit Discs<br />
Green disks, constructed of high performance<br />
aluminium oxide mineral. Rust removal and light<br />
dry sanding of metal surfaces.<br />
Hook-and-loop attachment system.<br />
Plain (P40 to P100 or holed (P40 to P120)<br />
3M Hookit Hand Pad<br />
For scuff sanding flat or contoured surfaces. Use<br />
with 150mm Hookit discs.<br />
3M Hookit Discs<br />
Gold discs, constructed of high performance<br />
aluminium oxide mineral strongly bonded on a<br />
smooth film or a ‘C’ weight backing.<br />
To sand marine paints, gelcoats, epoxy and<br />
primers.<br />
Hook-and-loop attachment system.<br />
Available plain or holed. Grits P80 to P500<br />
3M Hookit Discs Accessories<br />
Well balanced, vinyl pads make disks removable<br />
and reattachable.<br />
28<br />
• <strong>Pinmar</strong>
Fibre Discs<br />
3M’s most innovative and best performing<br />
grinding discs with tough, sharp alumina zirconia<br />
(AZ) mineral. Fast cutting, long-lasting and cool<br />
running for weld grinding and blending, metal<br />
and coatings removal and heavy duty deburring<br />
metal finishing.<br />
Grits P24 to P120 Sizes 115mm x 22mm, 127mm<br />
x 22mm, 178mm x 22mm.<br />
Scotch-Brite Products<br />
Hand Pads - Size 155 x 225mm<br />
Heavy Duty Pad – Tan<br />
Varnish stripping, bottom paint scuffing and<br />
stripping, rust removal and heavy clean-up.<br />
Light Duty Pad – White<br />
Light scouring, including rust removal. Easily<br />
cleaned for repeated work.<br />
Blending Hand Pad – Grey<br />
Blending/finishing of aluminium, wood highlighting<br />
and light paint removal.<br />
General purpose Pad – Maroon<br />
For scuffing before applying paint and primers,<br />
cleaning upholstery and chrome. Reusable<br />
Handpads Pre-Cut On a Roll<br />
Size 155 x 225mm<br />
3M Clean ’n Strip Purple Discs<br />
Faster cutting than wire brushes and wheels with<br />
no rust or contamination from metal residue.<br />
Masking tapes<br />
3M 3060 General Purpose<br />
Ideal for non-critical applications. Holding power<br />
up to 60. 19mm/25mm/38mm/50mm x 50m<br />
Scotch 2090 Long-Mask<br />
Masking Tape<br />
Weather resistant. UV stability<br />
and adhesive transfer resistance<br />
up to seven days after<br />
application.<br />
19mm/25mm/38mm/50mm x 50m<br />
STAR<br />
PRODUCT<br />
3M ScotchMark 256 Green<br />
Masking Tape<br />
Smooth, sharp edge does not lose shape over a<br />
long, continuous horizontal surface. Time limits<br />
when exposed to UV. 19mm/25mm x 50m<br />
Paint Striping Tape<br />
Scotch 218 Fine Line Tape<br />
Provides the finest colour line separation.<br />
Stretches easily yet tears by hand. Solvent and<br />
moisture resistance..<br />
1,6mm/2,4mm/3,2mm/4,7mm/6,3mm/9,5mm/12,<br />
7mm/19,1mm/25,4mm x 55m<br />
Other Tape<br />
Duct Tape<br />
For non-critical applications. 50mm x 46m<br />
Marine Cloth Tape<br />
Waterproofing, temporary repair, duct sealing,<br />
protecting, etc.<br />
3M Hand-Masker Pre-Folded<br />
Masking Film Rolls<br />
High density, non-porous film for paint masking<br />
and overspray protection on deck or hull.<br />
3M Marine Protective Films<br />
Film protection for every eventuality. In storage,<br />
transportation, refits, for large or small surface<br />
areas. Choice of backing thickness, colour and<br />
adhesive strength. From 20-2540mm x 300m in<br />
length<br />
Adhesive Sealants<br />
3M Marine Adhesive/Sealant<br />
5200<br />
High performance polyurethane adhesive/sealant<br />
– tack free in 48 hours, cures in 5-7 days with no<br />
shrinkage. Retains strength above and below the<br />
waterline. Flexible.<br />
STAR<br />
PRODUCT<br />
This star product can handle fibreglass deck to<br />
fibreglass hull, wood to fibreglass, portholes and<br />
deck fittings, motors on fibreglass transoms,<br />
under mouldings, hull seams above and below<br />
waterline. Centre board trunk joints. Between<br />
struts and planking. Stern joints. Deck housing,<br />
etc. Easy to apply with manual caulking gun.<br />
Remains workable with trowel or spatula up to<br />
four hours after application. Won’t sag or flow in<br />
vertical or horizontal seams. Cartridges and pails.<br />
3M Marine Adhesive/Sealant<br />
5200 FC<br />
A faster curing version of 5200. Tack free in one<br />
hour and cures in approx 24<br />
hours.<br />
3M Marine<br />
Adhesive/Sealant<br />
4200 FC<br />
One part, general purpose polyurethane which<br />
chemically reacts with moisture<br />
to give flexible bonds with<br />
good adhesion to wood,<br />
fibreglass, gelcoat, certain<br />
plastics and metals. Paintable<br />
and sandable. Forms watertight, weatherresistant<br />
seals on joints and hardware above or<br />
below the waterline. Approx half the strength of<br />
5200 which allows for disassembly of parts.<br />
3M General Purpose<br />
Adhesive Cleaner<br />
Easy cleanup of most adhesives,<br />
waxes, greases, oil and tars. If<br />
used properly will not harm<br />
thoroughly dried paint, vinyl or<br />
fabrics.<br />
STAR<br />
PRODUCT<br />
STAR<br />
PRODUCT<br />
STAR<br />
PRODUCT<br />
3M 80 Contact Neoprene<br />
Adhesive<br />
Fast, durable bonding for rubber (except EPDM);<br />
bonds vinyl and leather; adheres stainless steel<br />
panels, many plastics, laminate and wood.<br />
<strong>Pinmar</strong> • 29
Reconditioning and<br />
Maintenance Products<br />
3M Fibreglass Restorer and<br />
Wax<br />
To remove HEAVY oxidation, chalking,<br />
fading, minor scratches, rust and exhaust stains.<br />
Provides protection on fibreglass/gelcoat. Liquid<br />
or paste.<br />
3M Marine Fibreglass Cleaner<br />
and Wax<br />
To remove LIGHT to MEDIUM oxidations, clean,<br />
polish and protect fibreglass/gelcoat.<br />
3M Marine Protective Liquid<br />
Wax<br />
To provide high gloss and protect<br />
fibreglass/gelcoat, marine topside paints, painted<br />
aluminium and marine metal parts. Easy<br />
on/exceptionally easy-off formula.<br />
3M Marine Ultra Performance<br />
Paste Wax<br />
Unique 3M polymer technology provides the<br />
durability of an acrylic with the soil release and<br />
water beading properties of a fluoropolymer and<br />
silicone. Gives protective high gloss finish on<br />
marine fibreglass gelcoat, marine topside paints,<br />
painted aluminium and metal parts.. Retards U.V.<br />
damage. Easy-on/easy-off formula.<br />
3M Marine Superbuff Pad<br />
150mm diameter buffing pad with a wool pile on<br />
both sides of the pad. Will fit any standard<br />
electric drill.<br />
3M Acryl-Marine Putty – White<br />
Filling pinholes, scratches and other surface<br />
defects on hulls. White colour. Easy sanding, fast<br />
drying, spreads easily with low shrinkage.<br />
3M Marine Outdoor Vinyl<br />
Cleaner<br />
To clean, condition and protect marine vinyl and<br />
rubber components. Gel formula. Good<br />
performance on inflatable boats.<br />
3M Marine Outdoor Vinyl<br />
Cleaner and Restorer<br />
Cleans, shines, conditions and protects vinyl,<br />
rubber and plastic surfaces. Deep cleans dirt and<br />
grime, enhances appearances. Restores natural<br />
sheen, protects surfaces. Fresh lemon scent.<br />
Finishing Liquids<br />
3M Finesse-it II Finishing<br />
Liquid<br />
For topsdide paint systems and<br />
STAR<br />
PRODUCT<br />
gelcoat to remove swirl marks<br />
after compounding while<br />
leaving a glazed finish.<br />
Recommended after use of 3M compounds<br />
06025/27/29 and 09374.<br />
3M Finesse-It Finishing Liquid<br />
As above but suggested as final step in acrylic<br />
plastic reconditioning.<br />
Buffing and Polishing Pads<br />
3M Superbuff III 2 Plus 2<br />
Buffing Pad<br />
Blended untwisted wool with stiffer centre hub<br />
for more cutting power. Double sided<br />
(fits 5/8¨shaft).<br />
3M Superbuff Polishing Pad<br />
Double-sided, soft-edge polishisng pad for use<br />
with a polisher and glaze. Fine fibres for high<br />
gloss on paint and gelcoat surfaces (fits<br />
5/8¨shaft).<br />
Cleaning<br />
3M Doodlebug<br />
Cleaning System<br />
Use for cleaning and scrubbing<br />
decks, non-skid areas and hulls.<br />
Doodlebug pad holder with swivel<br />
head also available.<br />
Fastening Systems<br />
3M Scotchmate Hook-and-<br />
Loop Fasteners<br />
Two woven strips, one of which is covered with<br />
tiny, stiff hooks and with other with pliable loops.<br />
Pressed together they fasten and pull apart to<br />
open.Standard Sew-on and Pressure-Sensitive<br />
3M Dual Lock Reclosable<br />
Fasteners<br />
Two types of continuous plastic strips with<br />
mushroom shaped stems. Engage together to<br />
provide reclosable fastening for a wide range of<br />
applications.<br />
3M Dual Lock Reclosable<br />
Fastening System Mini Packs<br />
Advanced closure alternatives to zippers, screws,<br />
snaps, hooks, bolts, etc.<br />
Dry Guide Coat<br />
STAR<br />
PRODUCT<br />
3M Dry Guide Coat Cartridge<br />
and Kit<br />
Dry powder with applicator used to highlight<br />
surface imperfections and sand scratches prior to<br />
finishing with abrasives. Can be used on marine<br />
fillers, primers, paints and gelcoats. No solvents.<br />
30<br />
• <strong>Pinmar</strong>
Safety<br />
WARNING<br />
Respirators help reduce exposure to certain<br />
airborne contaminants. Misuse may result in<br />
sickness or death. Before use, the wearer must<br />
read and understand User Instructions provided<br />
as part of product packaging.<br />
3800 Series Respirators<br />
3M Maintenance Free Classic<br />
Respirators<br />
Effective protections against fine particulates.<br />
3M Electret filters for more comfort. Convex<br />
shape, nose clip and twin-strap for good fit.<br />
3M 8710E Dust Respirator<br />
Respiratory protection against<br />
fine dust –FFP1<br />
Standard : EN 149 : 2001<br />
Approval : CE Marked<br />
Maximum use level :<br />
Assigned Protection Factor 4 x<br />
OEL<br />
Nominal Protection Factor 4 x OEL<br />
STAR<br />
PRODUCT<br />
3M Maintenance Free Comfort<br />
Respirators<br />
Equipped with the 3M Cool Flow Exhalation valve<br />
to reduce heat build up in particularly hot and<br />
humid conditions.<br />
3M 8812 Dust Respirator<br />
(valved)<br />
Respiratory protection against fine dust –FFP1<br />
Standard : EN 149 : 2001<br />
Approval : CE Marked<br />
Maximum use level :<br />
Assigned Protection Factor 4 x OEL<br />
Nominal Protection Factor 4 x OEL<br />
3M Dust/Mist Respirator<br />
(valved)<br />
Respiratory protection against fine dust –FFP2<br />
Standard : EN 149 : 2001<br />
Approval : CE Marked<br />
Maximum use level :<br />
Assigned Protection Factor 10 x OEL<br />
Nominal Protection Factor 12 x OEL<br />
Reusable Gas & Vapour<br />
Respirators<br />
3M 4000 Series Maintenance<br />
A range of integral construction respirators for<br />
effective and comfortable protection against<br />
many gases, vapours and combinations of<br />
particulate hazards found in the marine industry.<br />
- 2 large bonded carbon filters for low breathing<br />
resistance<br />
- Low profile design for better peripheral vision<br />
- Low resistance parabolic valve to reduce heat<br />
build-up<br />
- Soft non-allergenic face piece material<br />
- Lightweight, well balanced design<br />
- Cradle head harness and easy fasten neck strap<br />
3M 4251<br />
Respiratory protection against organic vapours<br />
and particulates – FFAP2D<br />
Standard : EN 405 : 2002<br />
Approval : CE Marked<br />
Maximum use level :<br />
Organic Vapours up to 10 OEL or 1000 ppm<br />
(whichever is the lower)<br />
Particulates up to 10 x OEL<br />
3M 4255<br />
Respiratory protection against organic vapours<br />
and particulates – FFA2P3D<br />
Standard : EN 405 : 2002<br />
Approval : CE Marked<br />
Maximum use level :<br />
Organic Vapours up to 10 OEL or 5000 ppm<br />
(whichever is the lower)<br />
Particulates up to 50 x OEL<br />
6000 Series Reusable<br />
Respirators<br />
3M 6000 Series Half Masks<br />
- 3 sizes : 6100 small, 6200 medium, 6300 large<br />
- Twin filter design<br />
- Soft, lightweight elastomeric face piece<br />
- Cost-effective replacement filters<br />
- Unique 3M Bayonet filter fixing system<br />
- Low maintenance<br />
- EN 140 : 1998 / EC marked<br />
3M 6000 Series Full Face Masks<br />
- 3 sizes : 6700 small, 6800 medium, 6900 large<br />
- Twin filter design<br />
- Extremely lightweight<br />
- Wide field of vision<br />
- Cost-effective replacement filters<br />
- Polycarbonate lens is scratch and impact<br />
resistant to EN 166 : B<br />
- Speech transmission zone<br />
- Unique 3M Bayonet filter fixing system<br />
- Low maintenance<br />
- EN 136 Class 1 marked<br />
7000 series Reusable<br />
Respirators<br />
3M 7000 Series Half Masks<br />
- Available in 2 material & 2 sizes<br />
Natural Rubber : 7002 mediu, 7003 large.<br />
Silicone rubber : 7501 small, 7502 medium and<br />
7503 large<br />
- Twin filter design<br />
- Texture nose cup reduces face piece slippage<br />
and skin irritation caused by respiration build-up<br />
- Unique 3M Bayonet filter fixing system<br />
- Low maintenance<br />
EN 140 : 1998 / EC marked<br />
3M 7907S Series Full Face<br />
Masks<br />
- Durable Silcone face piece material<br />
- Double face sealing gasket ensures a good fit<br />
- Speech diaphragm improves communication<br />
- Polycarbonate lens is scratch and impact<br />
resistant to EN 166 : B<br />
- Unique 3M Bayonet filter fixing system<br />
- Lightweight<br />
- EN 140 : 1998 / EC marked<br />
Gas & Vapour Filters<br />
3M 6000 Cartridges Filters<br />
Series<br />
For use with 6000 and 7000 Series Half and Full<br />
Face masks.<br />
All 6000 Series filters can be used in combination<br />
with 5000 Series and 2000 series particulate filters<br />
Particulate Filters<br />
3M 5000 Series<br />
For use on cartridges with 3m Retainer 501<br />
Miscelleanous<br />
Ear Plugs<br />
3mm foam<br />
3M Sorbents<br />
Fluid Recovery<br />
Products<br />
STAR<br />
PRODUCT<br />
STAR<br />
PRODUCT<br />
3M Sorbents help contain and control potentially<br />
dangerous spills of oil and petrol… but repel<br />
water! They go to work immediately so there is<br />
less exposure to you and others and less risk to<br />
the environment.<br />
Available as pads, rolls and booms.<br />
<strong>Pinmar</strong> • 31
CORIAN<br />
Solid Surfaces<br />
Invented and produced by DuPont,<br />
Corian® is a solid surface offering<br />
superior design possibilities and<br />
excellent long-term performance, ideal<br />
for the marine environment.<br />
With its balance of beauty and<br />
performance, Corian® lends itself to<br />
imaginative uses, innovative designs<br />
and enduring applications.<br />
If you can imagine it, you can probably<br />
create it with Corian®. Available in over<br />
100 colours, Corian® can be carved,<br />
routed or worked like wood, moulded,<br />
thermoformed or inlayed… the design<br />
options are almost limitless.<br />
Marine Products<br />
Corian® has become increasingly popular with<br />
marine architects because of its unique<br />
combination of aesthetics and functionality.<br />
Highly durable and easy to repair, Corian® is a<br />
sensible choice for areas exposed to moisture, UV<br />
rays and extreme temperatures. Corian® is the<br />
surface material of choice on yachts, cruise ships,<br />
ferries, naval vessels, houseboats, offshore<br />
platforms, sailboats and powerboats.<br />
Totally solid, with no visible seams, Corian® can<br />
be used to create large, architectural pieces.<br />
Corian® combines well with other materials such<br />
as tile, stainless steel, wood, granite and glass.<br />
Corian® is just as appropriate for vertical<br />
applications as it is for horizontal surfaces, or for<br />
furniture, or lighting. The list of possibilities<br />
continues to evolve and expand.<br />
10 Year Warranty<br />
With proper care, the surfaces made of<br />
Corian® will stay looking like new for<br />
many years. A worktop with Corian®<br />
made by a fabricator certified by DuPont<br />
(member of the “Corian® Quality<br />
Network”) is warranted for 10 years<br />
against fabrication and installation<br />
defects. And, if you decide to sell your<br />
yacht, your warranty is transferable to<br />
the new owners.<br />
STAR<br />
PRODUCT<br />
32<br />
• <strong>Pinmar</strong>
ANDAMIOS<br />
Yacht Covering Systems<br />
Andamios was founded in 1997.<br />
Having quickly established itself as the<br />
leading constructor of scaffolding and<br />
plastic covers for yachts, they joined the<br />
<strong>Pinmar</strong> group in 2004.<br />
Their flexible but highly professional<br />
and certified team, dedicated<br />
exclusively to covering yachts, has<br />
created new standards unmatched<br />
either in Mallorca or beyond.<br />
Their understanding of their clients’<br />
needs means that they can build your<br />
tent in such a way as to allow maximum<br />
accessibility for shipyards, yacht<br />
painters, carpenters etc. Their flexibility<br />
means they can also respond quickly if<br />
you need to drop in a Sat Com dome.<br />
They are the first company to have built<br />
covers all the way down to the<br />
waterline while the boat is still in the<br />
water.<br />
Combined with <strong>Pinmar</strong>’s own state of<br />
the art extraction stystem, their covers<br />
are now the most environmentally<br />
effective in the world and are sought by<br />
shipyards from the USA through<br />
Northern Europe and the<br />
Mediterranean to the Middle East.<br />
Full fittings removal and reinstallation<br />
service available.<br />
yachtcovers@yachtcovers.com<br />
www.yachtcovers.com<br />
YACHT COVERING SYSTEMS<br />
<strong>Pinmar</strong> • 33
Chandlery<br />
Essentials for yachting<br />
We can supply any item of<br />
chandlery you require, from<br />
‘safety first’ to ‘the fun stuff’.<br />
Leisure & Pleasure<br />
Blocks, Pulleys etc<br />
STAR<br />
PRODUCT<br />
Lights, Batteries & Accessories<br />
STAR<br />
PRODUCT<br />
STAR<br />
PRODUCT<br />
STAR<br />
PRODUCT<br />
34<br />
• <strong>Pinmar</strong>
Safety Equipment<br />
STAR<br />
PRODUCT<br />
Products from<br />
the world’s<br />
leading<br />
manufacturers<br />
We have listed our most<br />
popular lines in this<br />
catalogue but we also<br />
source products from<br />
famous brands such as:<br />
Shackles<br />
STAR<br />
PRODUCT<br />
STAR<br />
PRODUCT<br />
STAR<br />
PRODUCT<br />
HEMPEL<br />
DEVOE COATINGS<br />
OMEGA BRUSHES<br />
CLIN AZUR<br />
TRAMEX<br />
OCEAN CONTROL<br />
BOESHIELD<br />
JOTUN<br />
KARCHER<br />
LEATHERMAN<br />
DURALAC<br />
BOERO<br />
HAMMERITE<br />
STAR<br />
PRODUCT<br />
Please contact us with<br />
your requirements.<br />
<strong>Pinmar</strong> • 35
www.pinmar.com<br />
www.yachtcovers.com