Download PDF - Hill Residential Systems

Sivoia® QS
power options | power panel wiring diagram
Sivoia® QS
power options | QS Link power supply
Sivoia QS with GRAFIK Eye® QS system wiring
Smart Panel Power Supply, single shade per output
Individual QS power supply
QSPS-P1-1-50
The power supply may be surface mounted by using the mounting tabs
if desired. Unplug line voltage cable of the power supply before wiring
low voltage terminal blocks. Line voltage cable included.
Sivoia QS
shade/drapery
120 V~
60 Hz
120 V~
60 Hz
Parts
1.2 in.
(31 mm)
2.77 in.
(70 mm)
3-pin connector: Communication
to additional Power supplies
4-pin connector: Power and
Communication to QS shade
or keypads
4.03 in.
(102 mm)
Line voltage input
Mounting tabs
QSPS-P1-10-60
10 Output Smart
Panel power supply
MUX
MUX
Com
MUX
MUX
24V ---
Com
Refer to wire length chart
on page 116 for wire gauge
and distance requirements
100 Devices
per link max.
100 Zones
QSPS-P1-10-60
10 Output Smart Panel
power supply
To other
QS Controls
MUX
MUX
Com
MUX
MUX
24V ---
Com
Individual QS J-Box Power Supply
QSPS-J-1-50
The power supply is designed to be mounted on a junction box in a remote location away from occupants.
Parts
seeTouch® QS
keypads
GRAFIK Eye® QS
Occupancy
sensor
COM
24
MUX
MUX
COM
MUX
MUX
Maximum devices powered
Total wire length
(104 mm)
of link (B)
from one QSPS-1-50
4.3 in based on wire gauge
(109 mm)
1.4 in
Maximum devices powered
Total wire length #18 of link AWG (B) (1 mm
#12 AWG #16 AWG
2 )
(36 mm)
Shadesfrom one QSPS-1-50 Controls
(4 mm 2 ) (1.5 based mmon 2 Black
wire gauge GRX-CBL-
Green ) White
346S-500
#18 AWG (1 mm
#12 AWG #16 AWG
2 )
1 Sivoia Shades QS
None
Controls 250 ft. 100 ft.
50 GRX-CBL- ft.
shade
(75
(4
m)
mm 2 )
(30
(1.5
m)
mm 2 )
Ground
Hot/Live (17 (100-240 346S-500 m) V~ 50/60 Hz)
Neutral
1 Sivoia QS Up to 8
250 ft. 100 ft.
None 1200 ft. 500 ft.
300
50
ft.
ft.
None shade seeTouch® QS
(350
(75
m)
m)
(150
(30
m)
m)
(75
(17
m)
m)
keypads*
Up to 8
1200 ft. 500 ft.
300 ft.
* 2 seeTouch None QS keypads seeTouch® may be QS exchanged for 1 control interface (QSE-CI-NWK-E)
(350 m) (150 m) (75 m)
keypads*
4.1 in
3-pin connector
Communication to
additional Power supplies
4-pin connector
Power and Communication
to QS shade or keypads
Line voltage input
100-240 V~ 50/60 Hz
Mounting location
* 2 seeTouch QS keypads may be exchanged for 1 control interface (QSE-CI-NWK-E)
118 | Lutron Lutron | 119