Download PDF - Hill Residential Systems

Lutron® | large pocket
Lutron® | custom pocket
Large pocket is available in the following sizes for all dual applications (for use
with Lutron dual pocket brackets) and large single applications. Available with
splice bar, flap, hanger, air vents, and ceiling tile support.
6 in. w x 9 in. h
(152 mm x 178 mm)
for dual roller 20TM
and dual roller 64TM
applications
7 in. w x 11 in. h
(178 mm x 279 mm)
for dual roller 100TM,
dual roller 150TM, and
dual roller 200CW
applications
Custom pockets are available in a wide variety of
user-specified sizes for any application.
All custom and dual pockets are available with splice bar
(allows for multiple pocket alignment), integrated air vents,
tile support (for ceiling tile integration), and flap and hanger
(3 flap sizes available).
All custom and dual pockets are 0.06 in (1 mm) thick.
Note:
Pocket size (Linear dimension) cannot exceed 46 in.
(1,168 mm) [2X+Y].
Maximum length = 120 in. (3048 mm)
T
T
T
8 in. w x 14 in. h
(203 mm x 356 mm)
for dual roller 225
applications
7 in. w x 7 in. h
(178 mm x 178 mm)
for single roller 225TM
applications
Optional flap and hanger
Flap sizes available:
2 in. (51 mm)
3 in. (76 mm)
5 in. (127 mm)
12 in. w x 6 in. h
(305 mm x 152 mm) for horizontal
dual roller 100TM, dual roller 150TM,
and dual roller 200CW applications
(dual flap available)
Optional splice bar
for multiple pocket alignment
Optional air vents
24 sq. in. per linear foot
(1,548 sq. cm)
tile support
ceiling tile
Optional tile support
for integration with ceiling tile
26 | Lutron Lutron | 27