12.11.2012 Views

Catalog 2008_4.pmd - Techtonics Tuning

Catalog 2008_4.pmd - Techtonics Tuning

Catalog 2008_4.pmd - Techtonics Tuning

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

TRANSAXLE PARTS<br />

311 110 TRANSMISSION–MAIN SHAFT SEAL KIT ('76-'92 8V)<br />

Replacing these seals is often overlooked when replacing the<br />

clutch. More clutches are changed from the clutch pushrod seal leak<br />

than for any other reason! Failure to replace faulty seals will cause<br />

the new clutch to slip and then it's back to square one, with another<br />

clutch to buy and all of that work. The kit consists of a special clutch<br />

push rod seal made of VITON® and a main shaft seal.<br />

311 111 TRANSMISSION–MAIN SHAFT SEAL KIT (16V & Mk3 2.0L 8V)<br />

Same as #311 110 except fits transaxles with larger input shaft such<br />

as: '86-'92 Scirocco, Golf, Jetta with16V and '93-early '99 Mk3 2.0L<br />

8V transaxles.<br />

311 112 CV DRIVE FLANGE SEAL KIT ('83 GTI ONLY, "2H" CODE)<br />

311 114 CV DRIVE FLANGE SEAL KIT ('75-'82)<br />

Fits 4 or 5 speeds.<br />

311 115 CV FLANGE SEAL KIT ('84-early '99 "020")<br />

Fits '84-early '99 "020" 5 speed transaxles.<br />

311 247 SYNCHRO RING ("020" TRANS, 1ST GEAR)<br />

311 295 SYNCHRO RING ("020" TRANS, 2ND or 3RD GEAR - COATED)<br />

Worn sycrhros are the main cause of 2nd and 3 rd gear shift grinding.<br />

311 296 SYNCHRO RING ("020" TRANS, 4TH OR 5TH GEAR)<br />

398 001 TRANSAXLE GASKET & SEAL SET (4-SPEED)<br />

Fits all '76-'84 4-speed transaxles.<br />

398 004 TRANSAXLE GASKET & SEAL SET (5-SPEED, '83 GTI)<br />

For '83 GTI close ratio transaxle. "2H" code<br />

398 005 TRANSAXLE GASKET & SEAL SET (5-SPEED, '79-'84)<br />

For all wide ratio 5-speed Rabbit, Scirocco, Jetta, Pick-Up.<br />

398 006 TRANSAXLE GASKET & SEAL SET (5-SPEED, '84-'92)<br />

For all 8V close and wide ratio transaxles from '84-'92.<br />

398 007 TRANSAXLE GASKET & SEAL SET (5-SPEED, '86-'92 16V & Mk3 2.0L)<br />

For "020 " transaxles that came with the 16V engine. Also fits Mk3<br />

2.0L 8V transaxles.<br />

398 008 TRANSAXLE GASKET & SEAL SET ('89-early '99 "02A")<br />

For all "02A" transaxles. Corrado, Passat and Mk3 VR6.<br />

498 070 BEARING SET ("020" TRANSAXLE - SET of 4)<br />

2 differential bearings, small and large pinion bearings.<br />

498 088 DIFFERENTIAL NUT & BOLT KIT ("020" TRANS)<br />

Necessary when changing ring & pinion or differential.<br />

498 089 DIFFERENTIAL NUT & BOLT KIT ("02A" & EARLY "02J" TRANS)<br />

For Mk4 up to 2/'04 5 speed with 114mm ring gear. Necessary when<br />

changing ring & pinion or differential.<br />

498 089L DIFFERENTIAL NUT & BOLT KIT (LATE "02J" TRANS)<br />

Necessary when changing ring & pinion or differential. For 3/'04 up<br />

Mk4 & Mk5 2.5L & 2.0T 5 speed with 113mm ring gear. (12.25mm<br />

ring gear hole and 10x1.5mm thread)<br />

498 090 DIFFERENTIAL NUT & BOLT KIT ("02M" & "02Q" TRANS)<br />

Necessary when changing ring & pinion or differential. Mk4 & Mk5<br />

54<br />

#398 008<br />

#311 296<br />

Peloquin Differentials<br />

#498 084<br />

#398 006<br />

498 080 PELOQUIN 80% MINI-SLIP KIT ('84-early '99 "020" TRANSAXLE)<br />

This kit increases the factory 20% limited slip effect to 80%. For the<br />

'84-early '99 "020" transmission.<br />

498 082 LIMITED-SLIP DIFFERENTIAL ('84-early '99 "020" TRANSAXLE)<br />

Peloquin's "020" limited-slip differential for the '84-early '99 clutch<br />

cable type 5-speed gearbox. Comes with bearings and a bolt kit.<br />

NOTE - Peloquin mini slip (#498 080) will work with this differential.<br />

(for 90mm flanges call for more info) Lifetime Warranty.<br />

498 084 LIMITED-SLIP DIFFERENTIAL ("02A" TRANSAXLE)<br />

Peloquin's "02A" limited-slip differential for G-60 and VR6 with 5speed<br />

manual gearbox. Comes with bearings, seals and a bolt kit.<br />

Lifetime Warranty.<br />

498 086 LIMITED-SLIP DIFFERENTIAL (EARLY "02J" TRANSAXLE)<br />

Peloquin's "02J" limited-slip differential for Mk4 up to 2/'04 5 speed<br />

with 114mm ring gear. Comes with bearings, seals and a bolt kit. Will<br />

need VIN# when ordering. Lifetime Warranty.<br />

498 086B LIMITED-SLIP DIFFERENTIAL (LATE "02J" TRANSAXLE)<br />

Peloquin's "02J" limited-slip differential for 3/'04up Mk4 & Mk5 2.5L<br />

& 2.0T 5 speed with 113mm ring gear. Comes with bearings, seals<br />

and a bolt kit. Will need VIN# when ordering. Lifetime Warranty.<br />

498 087 LIMITED-SLIP DIFFERENTIAL (Mk4 "02M" TRANSAXLE)<br />

Peloquin's "02M" limited-slip differential for 6 speed front wheel<br />

drive VW's. Comes with bearings, seals and a bolt kit. Will need<br />

VIN# when ordering. Lifetime Warranty<br />

498 100 LIMITED-SLIP DIFFERENTIAL (Mk5 "02Q" TRANSAXLE)<br />

Peloquin's "02Q" limited-slip differential for 6 speed front wheel<br />

drive Mk5 2.0T models . Bearings Extra, bolt kit included. Will need<br />

VIN# when ordering. Lifetime Warranty.<br />

498 102 LIMITED-SLIP FRONT DIFFERENTIAL (Mk4 R32 & '04-'06 AUDI TT 3.2L)<br />

Peloquin's limited-slip front differential for Mk4 R32 & '04-'06 Audi<br />

TT 3.2L. Seals and a bolt kit included. Lifetime Warranty.<br />

498 103 LIMITED-SLIP REAR DIFFERENTIAL (Mk4 R32 & '04-'06 AUDI TT 3.2L)<br />

Peloquin's "02M" limited-slip for rear differential for R32 Mk4 & '04-<br />

'06 Audi TT 3.2L ('06 will need transaxle #). Seals and a bolt kit<br />

included. Lifetime Warranty

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!