Soft starters DS and DM - Moeller Electric Parts

More documents

Recommendations

Info

DS6 soft starters 14/36 Technical Data Technical Data Soft starters Soft starters DS6 Moeller HPL0211-2007/2008 http://catalog.moeller.net http://catalog.moeller.net Moeller HPL0211-2007/2008 DS6 DS6-340-22K-MX DS6-340-30K-MX DS6-340-37K-MX DS6-340-45K-MX DS6-340-55K-MX DS6-340-75K-MX DS6-340-90K-MX DS6-340-110K-MX General Standards IEC/EN 60947-4-2 IEC/EN 60947-4-2 IEC/EN 60947-4-2 IEC/EN 60947-4-2 IEC/EN 60947-4-2 IEC/EN 60947-4-2 IEC/EN 60947-4-2 IEC/EN 60947-4-2 Approvals Climatic proofing Damp heat, constant according to IEC 60068-2-78; damp heat, cyclical, according to IEC 60068-2-10 Damp heat, constant according to IEC 60068-2-78; damp heat, cyclical, according to IEC 60068-2-10 Ambient temperature °C 0…40, up to 60 at 1 % derating per Kelvin temperature rise 0…40, up to 60 at 1 % derating per Kelvin temperature rise Ambient temperature, storage °C –25…55 –25…55 –25…55 –25…55 –25…55 –25…55 –25…55 –25…55 Altitude m 0…1000, above that 1 % derating per 100 m , up to 2000 m 0…1000, above that 1 % derating per 100 m , up to 2000 m Mounting position vertical vertical vertical vertical vertical vertical vertical vertical Degree of protection (Power connection) IP20 IP20 IP20 IP20 IP20 IP20 IP20 IP20 Protection against direct contact Finger and back-of-hand proof Finger and back-of-hand proof Overvoltage category/pollution degree II/2 II/2 II/2 II/2 II/2 II/2 II/2 II/2 Shock resistance 8 g/11 ms 8 g/11 ms 8 g/11 ms 8 g/11 ms 8 g/11 ms 8 g/11 ms 8 g/11 ms 8 g/11 ms Vibration resistance to EN 60721-3-2 g 2M2 2M2 2M2 2M2 2M2 2M2 2M2 2M2 Average heat dissipation at rated load cycle W 7 10 13 18 25 24 30 42 Dimensions (W x H x D) mm Radio interference level “A1” “A1” “A1” “A1” “A1” “A1” “A1” “A1” Weight kg 1.8 1.8 1.8 1.8 1.8 3.7 3.7 3.7 Main conducting paths Rated operating voltage Ue V AC 230 – 460 230 – 460 230 – 460 230 – 460 230 – 460 230 – 460 230 – 460 230 – 460 Supply frequency Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Rated operational current AC-51 (resistive loads) Ie A 41 55 68 81 99 135 160 200 AC-53 (motor loads) Ie A 41 55 68 81 99 135 160 200 Assigned motor rating (standard connection) 230 V kW 11 15 15 22 30 30 45 55 400 V kW 22 30 37 45 55 75 90 110 460 V HP 30 40 50 60 75 100 125 150 Overload cycle to IEC/EN 60947-4-2 AC-51 (built-in bypass) 41 A: AC-53a: 3…5; 75…10 Terminal capacities Cable lengths Solid mm2 1 x (25 – 70) 2 x (6 – 25) Flexible with ferrule mm2 Stranded mm2 1 x (25 – 70) 2 x (6 – 25) 55 A: AC-53a: 3…5; 75…10 1 x (25 – 70) 2 x (6 – 25) 1 x (25 – 70) 2 x (6 – 25) 68 A: AC-53a: 3…5; 75…10 1 x (25 – 70) 2 x (6 – 25) 1 x (25 – 70) 2 x (6 – 25) 81 A: AC-53a: 3…5; 75…10 1 x (25 – 70) 2 x (6 – 25) 1 x (25 – 70) 2 x (6 – 25) 99 A: AC-53a: 3…5; 75…10 99 A: AC-53a: 3…5; 75…10 1 x (25 – 70) 2 x (6 – 25) 1 x (25 – 70) 2 x (6 – 25) 135 A: AC-53a: 3…5; 75…10 135 A: AC-53a: 3…5; 75…10 1 x (4 – 185) 2 x (4 – 70) 1 x (4 – 185) 2 x (4 – 70) Solid or stranded AWG 1 x (12 – 2/0) 1 x (12 – 2/0) 1 x (12 – 2/0) 1 x (12 – 2/0) 1 x (12 – 2/0) 1 x (12…350 kcmil) 2 x (12 – 00) 160 A: AC-53a: 3…5; 75…10 160 A: AC-53a: 3…5; 75…10 1 x (4 – 185) 2 x (4 – 70) 1 x (4 – 185) 2 x (4 – 70) 1 x (12…350 kcmil) 2 x (12 – 00) 200 A: AC-53a: 3…5; 75…10 200 A: AC-53a: 3…5; 75…10 1 x (4 – 185) 2 x (4 – 70) 1 x (4 – 185) 2 x (4 – 70) 1 x (12…350 kcmil) 2 x (12 – 00) 2 x 9 x 0.8 2 x 9 x 0.8 2 x 9 x 0.8 2 x 9 x 0.8 Band min. mm 2 x 9 x 0.8 2 x 9 x 0.8 2 x 9 x 0.8 2 x 9 x 0.8 9 x 9 x 0.9 10 x 16 x 0.8 10 x 16 x 0.8 10 x 16 x 0.8 max. mm 9 x 9 x 0.9 9 x 9 x 0.9 9 x 9 x 0.9 9 x 9 x 0.9 Tightening torque Nm Control cables Solid mm2 1 x (0.5 – 2.5) 2 x (0.5 – 1.0) Flexible with ferrule mm2 1 x (0.5 – 1.5) 2 x (0.5 – 0.75) Stranded mm2 1 x (0.5 – 1.5) 2 x (0.5 – 1.0) Solid or stranded AWG 1 x (21 – 14) 2 x (21 – 18) 1 x (0.5 – 2.5) 2 x (0.5 – 1.0) 1 x (0.5 – 1.5) 2 x (0.5 – 0.75) 1 x (0.5 – 1.5) 2 x (0.5 – 1.0) 1 x (21 – 14) 2 x (21 – 18) 1 x (0.5 – 2.5) 2 x (0.5 – 1.0) 1 x (0.5 – 1.5) 2 x (0.5 – 0.75) 1 x (0.5 – 1.5) 2 x (0.5 – 1.0) 1 x (21 – 14) 2 x (21 – 18) 1 x (0.5 – 2.5) 2 x (0.5 – 1.0) 1 x (0.5 – 1.5) 2 x (0.5 – 0.75) 1 x (0.5 – 1.5) 2 x (0.5 – 1.0) 1 x (21 – 14) 2 x (21 – 18) 1 x (0.5 – 2.5) 2 x (0.5 – 1.0) 1 x (0.5 – 1.5) 2 x (0.5 – 0.75) 1 x (0.5 – 1.5) 2 x (0.5 – 1.0) 1 x (21 – 14) 2 x (21 – 18) 1 x (0.5 – 2.5) 2 x (0.5 – 1.0) 1 x (0.5 – 1.5) 2 x (0.5 – 0.75) 1 x (0.5 – 1.5) 2 x (0.5 – 1.0) 1 x (21 – 14) 2 x (21 – 18) 1 x (0.5 – 2.5) 2 x (0.5 – 1.0) 1 x (0.5 – 1.5) 2 x (0.5 – 0.75) 1 x (0.5 – 1.5) 2 x (0.5 – 1.0) 1 x (21 – 14) 2 x (21 – 18) flat conductor Tightening torque Nm 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 Screwdriver (PZ: Pozidriv) mm 0.6 x 3.5 0.6 x 3.5 0.6 x 3.5 0.6 x 3.5 0.6 x 3.5 0.6 x 3.5 0.6 x 3.5 0.6 x 3.5 Notes Rated impulse withstand voltage: •1.2 ms/50 ms (rise time/fall time of the pulse to IEC/EN 60947-2 or -3) • Applies for control circuit/power section/enclosure For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 1 x (0.5 – 2.5) 2 x (0.5 – 1.0) 1 x (0.5 – 1.5) 2 x (0.5 – 0.75) 1 x (0.5 – 1.5) 2 x (0.5 – 1.0) 1 x (21 – 14) 2 x (21 – 18) 14/37 DS6 soft starters
DS6 soft starters 14/38 Technical Data Technical Data Soft starters Soft starters DS6 Moeller HPL0211-2007/2008 http://catalog.moeller.net http://catalog.moeller.net Moeller HPL0211-2007/2008 DS6 DS6-340-22K-MX DS6-340-30K-MX DS6-340-37K-MX DS6-340-45K-MX DS6-340-55K-MX DS6-340-75K-MX DS6-340-90K-MX DS6-340-110K-MX Power section Rated impulse withstand voltage Uimp kV 4 4 4 4 4 4 4 4 Rated insulation voltage Ui V AC 500 500 500 500 500 500 500 500 Short-circuit rating Type “1” coordination at AC-53a: 3…5 : 75…10 NZMN1-M50/ PKZM4-50 Type “2” coordination short-circuit rating (additional with the fuses for coordination type “1”) NZMN1-M63/PKZM4- 58 NZMN1-M80 NZMN1-M100 NZMN1-M100 NZMN2-M160 NZMN2-M200 NZMN2-M200 3 x 20.282.20-100 3 x 20.282.20-125 3 x 20.610.32-200 3 x 20.610.32-200 3 x 20.610.32-200 3 x 20.610.32-350 3 x 20.610.32-400 3 x 20.610.20-500 Fuse holders 3 x 21.189.01 3 x 21.189.01 3 x 21.313.02 3 x 21.313.02 3 x 21.313.02 3 x 21.313.02 3 x 21.313.02 3 x 21.313.02 Control circuit Regulator supply voltage Voltage Current consumption V +24 DC +10%/-15% +24 DC +10%/-15% +24 DC +10%/-15% +24 DC +10%/-15% +24 DC +10%/-15% +24 DC +10%/-15% +24 DC +10%/-15% +24 DC +10%/-15% Current consumption at 24 V DC mA 35 35 35 35 35 35 35 35 Current consumption in operation at 24 V DC mA 65 65 65 65 65 65 65 65 Current consumption at peak performance (close bypass) at 24 V DC Control voltage 600/50 ms 600/50 ms 600/50 ms 600/50 ms 600/50 ms 600/50 ms 600/50 ms 600/50 ms DC-operated V DC +24 +10%/-15% +24 +10%/-15% +24 +10%/-15% +24 +10%/-15% +24 +10%/-15% +24 +10%/-15% +24 +10%/-15% +24 +10%/-15% Current consumption at 24 V DC Pick-up voltage mA 14 14 14 14 14 14 14 14 DC-operated Drop-out voltage V DC +17.3…27 +17.3…27 +17.3…27 +17.3…27 +17.3…27 +17.3…27 +17.3…27 +17.3…27 DC operated Pick-up time V DC 0…3 0…3 0…3 0…3 0…3 0…3 0…3 0…3 DC operated Drop-out time ms 250 250 250 250 250 250 250 250 DC operated Relay outputs ms 190 190 190 190 190 190 190 190 number (top of ramp) 2 (TOR, Ready) 2 (TOR, Ready) 2 (TOR, Ready) 2 (TOR, Ready) 2 (TOR, Ready) 2 (TOR, Ready) 2 (TOR, Ready) 2 (TOR, Ready) Voltage range V AC 250 250 250 250 250 250 250 250 AC-1 current range A 3 3 3 3 3 3 3 3 Soft start function Ramp times Acceleration s 1…30 1…30 1…30 1…30 1…30 1…30 1…30 1…30 Deceleration s 0…30 0…30 0…30 0…30 0…30 0…30 0…30 0…30 Start voltage (= turn-off voltage) % 30…92 30…92 30…92 30…92 30…92 30…92 30…92 30…92 Voltage reduction at stop % 8 8 8 8 8 8 8 8 Torque free time for rotation direction reversal ms – – – – – – – – Notes Rated impulse withstand voltage: •1.2 ms/50 ms (rise time/fall time of the pulse to IEC/EN 60947-2 or -3) • Applies for control circuit/power section/enclosure For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 14/39 DS6 soft starters
Page 1 and 2: Soft starters DS and DM Soft starte
Page 3 and 4: http://catalog.moeller.net Moeller
Page 7 and 8: DS4 soft starters 14/8 Engineering
Page 9 and 10: DS6 soft starters 14/10 Application
Page 11 and 12: DS6 soft starters 14/12 Accessories
Page 13 and 14: Softstarter DS6 14/14 Engineering E
Page 25 and 26: DM4 soft starters 14/28 Part no. 1)
Page 27 and 28: DS4 soft starters 14/32 Technical D
Page 29: http://catalog.moeller.net Moeller
Page 33 and 34: DM4 soft starters 14/42 Technical D
Page 35 and 36: DM4 soft starters 14/46 Technical D
Page 39: http://catalog.moeller.net Moeller

Soft starters DS and DM - Moeller Electric Parts

Create successful ePaper yourself

Delete template?

Save as template?