AIR COMP ACT AIR COMP ACT - Euroconfort

■ 2-way mixing box: CM2
Air handling
units
AIR COMPACT
Box enabling fresh air and return air to be mixed by a moving vane ensuring flow metering and distribution.
Manual and motorisable control.
■ 3-way mixing box: CM3
Box enabling removal of extracted air, introduction of fresh air and
air recycling via the intermediary of two moving vanes ensuring
flow metering and distribution.
Manual and motorisation control possible.
HI HS SI
■ Straight or Curved Plenums: PLD PRS
Can be mounted on either intake or discharge.
2 plenum types:
- intake or direct discharge: frame with double deflection
grille, length 25 mm.
- intake or discharge at RIGHT ANGLE: fitted with a double
deflection grille, length 330 mm.
PLD
PRS
■ Filtration
In addition to a full section G4 filter base assembly,
the following solutions are available: G4, F5 pleated, F6-F7-
F8-F9 rigid pockets in universal sizes, with a compression
system starting at filtration efficiency class F6.
- Pressure taps mounted as standard on each stage.
- Optional liquid filled pressure gauge.
■ Hydraulic or evaporator coil in the AHU or
vertical unit. CFV
The coils are totally DRAINABLE. Piping is fitted with threaded
ends with purge and drain plugs (Ø 1/8’’).
- In heating mode:
Size 25: 1, 2, and 3-row coils are available,
Size 40 and 60: 1, 2, and 4-row coils are available,
A frost protection thermostat with automatic reset can
be installed on the coil.
- In refrigeration mode:
For each size there are 3, 4, and 6-row chilled water coils and
3, 6 rows of direct expansion coils.
The section is fitted with an eliminator, maximum face velocity:
3.1 m/s and a stainless steel condensate container.
Container isolation option using closed-cell foam.
For vertical applications, max 4 rows in the CFV unit.
2
AIR CONDITIONING - HEATING - REFRIGERATION - AIR HANDLING - HEAT EXCHANGE - NA 08.637 A