Label Conference - Brigl & Bergmeister
Label Conference - Brigl & Bergmeister
Label Conference - Brigl & Bergmeister
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Typical properties/characteristics of<br />
labelling adhesives<br />
Initial Tack<br />
Tack build-up<br />
Setting Time<br />
Time to fibre tear<br />
Viscosity<br />
Shelf life<br />
Solids<br />
pH<br />
Ideal operating temperature<br />
Washability<br />
Condensation-water resistance<br />
Ice-water resistance<br />
Measurable Values<br />
Working values<br />
All the above are properties/characteristics of interest but they do not<br />
depend on the adhesive alone<br />
EU Ecolabel award<br />
1. The objective of the Community eco-label award scheme (hereafter referred to as the<br />
Scheme) is to promote products which have the potential to reduce negative environmental<br />
impacts, as compared with the other products in the same product group, thus contributing to<br />
the efficient use of resources and a high level of environmental protection. This objective shall<br />
be pursued through the provision of guidance and accurate, non-deceptive and scientifically<br />
based information to consumers on such products.<br />
The Community Eco-label award scheme is designed to:<br />
- promote products which have a reduced environmental impact compared with<br />
other products in the same product group.<br />
- provide consumers with accurate and scientifically based information and<br />
guidance on products.<br />
http://europa.eu/legislation_summaries/other/l28020_en.htm
Change language