Suburban Furnace Service Manual - BR Wholesale RV & Marine

NT ELECTRODE GAP SPECIFICATIONS
AND POSITIONING
To assure consistent ignition of the burner, it is important for the electrode to be positioned properly over the top of the burner.
When replacing the electrode, or should you be experiencing ignition type problems, the electrode should be positioned as
outlined in the drawing.
1. 1/8" spark gap between electrode and ground.
2. Maintain electrode position of 3/16" over burner ports.
Figure 32
LOCAL FLAME SENSE
PARK MODEL ELECTRODE GAP SPECIFICATIONS
AND POSITIONING
To assure consistent ignition of the burner, it is important for the electrode to be positioned properly over the top of the burner.
W hen replacing the electrode, or should you be experiencing ignition type problems, the electrode should be positioned as
outlined in the drawing.
1. 1/8" spark gap between electrode and ground.
2. 1/4" spark gap between ground and flame sensor.
3. Maintain electrode position of 3/16" over burner ports.
Figure 33
REMOTE FLAME SENSE
38