European Technical Catalogue 2009 - Pinmar

BINKS DVP DOUBLE DIAPHRAGM PUMP
Choice of pail or wall-mounted outfits
Rapid delivery of up to 8.5 litres per minute
Even material flow at up to 60 cycles / minute
Economic air consumption at pressures up to
7 bar (100psi)
Designed for quick flushing and material
changes
Specification
Pump Ratio 1:1
Regulated air pressure 7 bar
Max. paint viscosity (ford 4) 60 sec
Universal threaded fluid connector 1/4”
Max. temperature 90°C
Recommended operating speed: Cycle/min 60
Max. fluid pressure 7 bar
Max. fluid flow 8.5 l/min
Universal fluid threaded connector 3/8”
Part No Description
DVP-610 Compact double diaphragm fluid pump. Complete with “Euro” lid for pail
mounting (Pail not included)
DVP-630 Compact double diaphragm fluid pump for wall mounting. Complete with wall
mounting bracket and suction wand.
H-7501
PA-HC-4527
H-7502
PA-HC-4528
H-7503
PA-HC-4543
H-7504
PA-HC-4548
Page 34
8mm (5/16”) bore red rubber air hose
1/4” BSP Female (8mm (5/16”) hose bore)
9.5mm (3/8”) bore red rubber air hose
1/4” BSP Female (9.5mm (3/8”) hose bore)
6mm (1/4”) bore black rubber fluid hose
3/8” BSP Female (6mm (1/4”) hose bore)
9.5mm (3/8”) bore black rubber fluid hose
3/8” BSP Female (9.5mm (3/8”) hose bore)
Repair Kits
Part No Repair Kit
Reference
Description
DVP-114-K6 A Kit of 6 gaskets
KK-4630 B Diaphragm and stud kit
KK-4631 C Standard fluid valve kit
KK-4633 E Reverse switch kit
KK-4634 F Pneumatic distributor
Hose by the metre
H-7501 &
PA-HC-4527
Hose by the metre
H-7503 &
PA-HC-4543
European Technical Catalogue 2009