Michael Moles' Publications - Mechanical and Industrial Engineering

Papers Presented and Published from May 2003 to present
Michael Moles
September 15, 2008
1. Pamela Herzog, John Selman and Michael Moles, “Phased Arrays FastFOCUS
System”, International Conference on Aircraft Fatigue, May 2003, Switzerland.
2. F. Honarvar, T. Dusatko, Y. Fan, F. Farzbod, M. Moles and A.N. Sinclair, “A
novel signal processing technique for enhancement of time-of-flight diffraction
(TOFD) signals”, International Chemical and Petroleum Industry Inspection
Technology ICPIIT VIII, Houston, 18-21 June 2003.
3. Michael Moles and Frédéric Jacques, “Orbital Scanner for Tube-to-Tube Weld
Inspections”, International Chemical and Petroleum Industry Inspection
Technology ICPIIT VIII, Houston, 18-21 June 2003.
4. Michael Moles and André Lamarre, “Phased Array Ultrasonic Inspection of
Friction Stir Welds”, 4 th Friction Stir Weld Conference, Park City, Utah, June
2003.
5. Michael Moles, Noël Dubé and Frédéric Jacques, “Pressure Vessel Inspections
Using Ultrasonic Phased Arrays”, ASME 2003 Pressure Vessel and Piping
Conference, Cleveland, 20-24 July 2003.
6. Michael Moles, Noël Dubé and Ed Ginzel, “PipeWIZARD – Pipeline Girth Weld
Inspections using Ultrasonic Phased Arrays”, ASME 2003 Pressure Vessel and
Piping Conference, Cleveland, 20-24 July 2003.
7. Michael Moles, Noël Dubé and Ed Ginzel, “Pipeline Girth Weld Inspections
using Ultrasonic Phased Arrays”, 2 nd International Conf on NDT, Istanbul,
Turkey, 9-11 October, 2003.
8. Michael Moles, Noël Dubé and Frédéric Jacques, “Pressure Vessel Inspections
Using Ultrasonic Phased Arrays”, 2 nd International Conf on NDT, Istanbul,
Turkey, 9-11 October, 2003.
9. John Selman, Ted Miller, Olivier Dupuis, André Cyr, Michael Moles and Pamela
Herzog, “FastFOCUS Ultrasonic Phased Array System for Airplane Fastener
Hole Inspections”, 2 nd International Conf on NDT, Istanbul, Turkey, 9-11
October, 2003.
10. Michael Moles, Noël Dubé and Ed Ginzel, “Pipeline Girth Weld Inspections
using Ultrasonic Phased Arrays”, 7 th Int Pipeline Congress and Exhibition,
Puebla, Mexico, 12-14 Nov 2003, ref # CIN-039.
11. André Lamarre, Olivier Dupuis and Michael Moles, “Comprehensive Inspection
of Friction Stir Welds using Arrays”, ASM-ASNT Joint Conference, Fall 2003,
Pittsburgh, 13-15 October 2003.
12. Michael Moles, Noël Dubé and Frédéric Jacques, “Ultrasonic Phased Arrays for
Thick Section Weld Inspections”, ASM-ASNT Joint Conference, Fall 2003,
Pittsburgh, 13-15 October 2003.
13. Michael Moles, “Applications of Industrial Phased Arrays”, 2 nd American
Welding Society Conference on NDT, Dec 2-3, 2003, Orlando, Florida.
14. Michael Moles, Dave Stewart, Malcolm Gray, Henri Godinot and Henri
Romazzotti, “Inspecting Seamless Pipe Welds of Variable Wall Thickness using
1

Ultrasonic Phased Arrays”, American Society for Nondestructive Testing, 8-12
March 2004, Austin, Texas.
15. Michael Moles and Simon Labbé, “Developments in Ultrasonic Phased Array
Inspections of Pipeline Welds”, Inspection Trends, AWS, Spring 2004, vol 7, no
2.
16. Michael Moles and Ed Ginzel, “Ultrasonic Weld Inspection for the 21 st Century-
Phased Arrays”, Inspection Trends, AWS, Spring 2004, vol 7, no 2.
17. Michael Moles and Simon Labbé, “Automated Ultrasonic Inspection of Pressure
Vessel Welds”, XXII CONAEND National Conference for Non-Destructive
Testing, 12-14 July 2004, organized by ABENDE.
18. Michael Moles and Fabio Fraga Moreira, “Small Pipe Weld Inspections using
Phased Arrays”, XXII CONAEND National Conference for Non-Destructive
Testing, 12-14 July 2004, organized by ABENDE.
19. André Lamarre, Olivier Dupuis and Michael Moles, “Complete Inspection of
Friction Stir Welds in Aluminum using Ultrasonic and Eddy Current Arrays”,
XXII CONAEND National Conference for Non-Destructive Testing, 12-14 July
2004, organized by ABENDE.
20. Honarvar, F., Sheikhzadeh, H., Moles, M., and Sinclair, A.N. (2004), “Improving
the Time-Resolution and Signal-to-Noise ratio of Ultrasonic NDE Signals”,
Ultrasonics, 41, 755-763.
21. Michael Moles, Olivier Dupuis, André Lamarre, Pamela Herzog, Mike Ashbaugh
and John Selman, “FastFOCUS Phased Array System for Air Plane Fastener
Inspections”, XXII CONAEND National Conference for Non-Destructive
Testing, 12-14 July 2004, organized by ABENDE.
22. Fabio Moreira, Michael Moles, Noël Dubé, Simon Labbé and Ed Ginzel,
“Pipeline girth weld inspections of pipes from 60 mm diameter and 5 mm wall
and above using ultrasonic phased arrays”, XXII CONAEND National
Conference for Non-Destructive Testing, 12-14 July 2004, organized by
ABENDE.
23. Michael Moles, Noël Dubé, Simon Labbé and Ed Ginzel, “Pipeline Girth Weld
Inspections using Ultrasonic Phased Arrays”, XXII CONAEND National
Conference for Non-Destructive Testing, 12-14 July 2004, organized by
ABENDE.
24. Michael Moles and Jinchi Zhang, “Construction weld inspection procedures
using ultrasonic phased arrays”, ASNT Fall Conference, Las Vegas, NV, 15-19
November, 2004
25. Michael Moles, Noël Dubé and Simon Labbé, “Special Phased Array
Applications for Pipeline Girth Weld Inspections”, IPC04-0417, International
Pipeline Conference 2004, Calgary, Alberta, 4-8 October 2004.
26. Michael Moles, Dave Stewart, Malcolm Gray, Henri Godinot, Henri Romazzotti,
“Inspecting Seamless Pipe Welds of Variable Wall Thickness using Ultrasonic
Phased Arrays”, 4 th Pipeline Technology Conference, Ostend, Belgium, 9-13 May
2004.
27. Michael Moles and Simon Labbé, “Automated Ultrasonic Inspection of Pressure
Vessel Welds”, ASME pressure Vessel and Piping Conference, La Jolla, CA, July
26-28, 2004.
2

28. Michael Moles, “Defect Sizing in Pipeline Welds – What Can We Really
Achieve”, PVP2004-2811, ASME pressure Vessel and Piping Conference, La
Jolla, CA, July 26-28, 2004.
29. Michael Moles, Olivier Dupuis, André Lamarre, Pamela Herzog, Mike Ashbaugh
and John Selman, “FastFOCUS Phased Array System for Air Plane Fastener
Inspections”, 16 th WCNDT (World Conference on NonDestructive Testing),
Montreal, August 30-Sept 3, 2004.
30. Jastrzebski, M., Dusatko, T., Fortin, J., Farzbod, F., Sinclair, A.N., and Moles,
M.D.C., “Enhancement of Synthetic Aperture Focusing Technique by Advanced
Signal Processing”, 16th World Conference on Nondestructive Testing, Montreal,
(August 2004).
31. Michael Moles and Simon Labbé, “Automated Ultrasonic Inspection of Pressure
Vessel Welds”, 16 th WCNDT, Montreal, August 30-Sept 3, 2004.
32. André Lamarre, Olivier Dupuis and Michael Moles, “Complete Inspection of
Friction Stir Welds in Aluminum using Ultrasonic and Eddy Current Arrays”, 16 th
WCNDT, Montreal, August 30-Sept 3, 2004.
33. Michael Moles, Noël Dubé and Ed Ginzel, “Pipeline Girth Weld Inspections
using Ultrasonic Phased Arrays”, 16th WCNDT, Montreal, August 30-Sept 3,
2004.
34. Michael Moles, Olivier Dupuis, André Lamarre, Pamela Herzog , Mike Bode and
John Selman, “FastFOCUS Phased Array System for Air Plane Fastener
Inspections”, ASIP (Aircraft Structural Integrity Program) Nov 29-Dec 2, 2004.
35. Moles and Jinchi Zhang, “Construction weld inspection procedures using
ultrasonic phased arrays”, Materials Evaluation, January 2005, p. 27.
36. Michael Moles, “A New Solution for Ultrasonic Weld Inspection”, Inspection
Trends, January 2005, Vol 8, No. 1, p. 27.
37. Michael Moles and Simon Labbé, “Ultrasonic inspection of pressure vessel
construction welds using phased arrays”, National Pressure Equipment
Conference, Banff, AB, Feb 9-11.
38. Michael Moles, “Application of Time-Of-Flight Diffraction for Weld
Inspections”, NonDestructive Testing Managers’ Association, 14-16 February
2005, Las Vegas, NV.
39. Jesse Granillo and Michael Moles, “Portable Phased Array Applications”, ASNT
Spring Conference, Albuquerque, NM, March 14-18
40. Fabio Fraga Moreira and Michael Moles, “Small diameter pipe girth weld
inspections using ultrasonic phased arrays”, ASNT Spring Conference,
Albuquerque, NM, March 14-18.
41. Andre Lamarre and Michael Moles, “Nondestructive Testing of Airplane
Components”, CASI (Canadian Aeronautics Symposium), Toronto, April 25-27,
2005
42. Jesse Granillo and Michael Moles, “Portable Phased Array Applications”,
Materials Evaluation, April 2005, p. 394.
43. Michael Moles and Simon Labbé, “Linear Inspection of Welds Using Ultrasonic
Phased Arrays”, ASM Trends in Welding Conference, Callaway Gardens,
Georgia, May 16-20. (Not published).
3

44. André Lamarre, Olivier Dupuis and Michael Moles, “Complete Inspection of
Friction Stir Welds in Aluminum using Ultrasonic and Eddy Current Arrays”,
ASM Trends in Welding Conference, Callaway Gardens, Georgia, May 16-20.
45. Michael Moles, Simon Labbé and Jinchi Zhang, “Improved Focusing for Pipeline
Girth Weld Inspections using Phased Arrays”, IICPIT Houston, June 1-4, 2005.
46. Fabio Fraga Moreira and Michael Moles, “Small diameter pipe girth weld
inspections using ultrasonic phased arrays”, IICPIT Houston, June 1-4, 2005.
47. Michael Moles, “Applications of Portable Phased Arrays”, VIth NDT Conference,
Mexico City, August 25-26.
48. Michael Moles, Noël Dubé, Simon Labbé and Ed Ginzel, “Review of Ultrasonic
Phased Arrays for Pressure Vessel and Pipeline Weld Inspections”, ASME
Journal of Pressure Vessel Technology, August 2005, vol. 127, p. 351.
49. Jinchi Zhang, Simon Labbé and Michael Moles, “Improved Lateral Focusing for
Thin-walled Gas Pipelines Girth Welds using Phased Arrays”, ASNT Fall
Conference, Oct 17-21, 2005, Columbus, Ohio.
50. Robert K. Ginzel , Edward A. Ginzel, Mark Davis, Simon Labbé, & Michael
Moles “Qualification of Portable Phased Arrays to ASME Section V”, ASNT
Fall Conference, Oct 17-21, 2005, Columbus, Ohio.
51. Michael Moles, “TOFD and Phased Arrays: Where they score, where they
don’t”, ASNT Fall Conference, Oct 17-21, 2005, Columbus, Ohio.
52. Michael Moles, Fabio Fraga Moreira and Simon Labbé, “Special Phased Array
Applications For Pipeline Girth Weld Inspections”, Rio Pipeline Conference &
Exposition 2005, Paper IBP1052_05, Rio de Janeiro, Brazil, October 17-21, 2005.
53. Michael Moles, Noël Dubé and Simon Labbé, “Special Phased Array
Applications for Pipeline Girth Weld Inspections”, 8 th International Pipeline
Symposium, Mérida, Mexico, Nov 9-11, 2005.
54. Chris Magruder (written and presented by Michael Moles), “Mechanized
Inspection of Gas Pipeline SCC using Phased Arrays”, Electric Power Research
Institute Phased Array and Bolting Seminar, Miami Beach, Dec 6-8, 2005.
55. Jinchi Zhang, Simon Labbé and Michael Moles, “Improved focusing for thickwalled
pipeline weld inspections using phased arrays”, Insight, Vol 47, no 12,
December 2005, p. 1.
56. Sinclair, A.N., Fortin, J., Honarvar, F., Jastrzebski, M., and Moles, M.D.C.,
“Enhancement of Ultrasonic B-Scan Images for Sizing of Defects by Time-of-
Flight Diffraction”, TICME 2005, Tehran (2005).
57. Michael Moles, “Qualification of Phased Arrays to ASME Section V and Other
Codes”, International Pressure Equipment Integrity Association, Banff, Alberta,
1-3 February 2006.
58. Michael Moles, “Portable Phased Array Applications”, NDTMA, Las Vegas,
February 14-16, 2006
59. Michael Moles and Simon Labbé, “Portable Phased Array Girth Weld Scanner”,
ASNT Spring Conference, Orlando, FL, March 13-17, 2006
60. J. Mark Davis and Michael Moles, “Resolving Capabilities of Phased Array
Sectorial Scans (S-Scans) on Diffracted Tip Signals”, Insight, Vol 48, no. 4 April
2006, p. 1.
4

61. R.K. Ginzel and M.D.C. Moles, “Potential of Phased Arrays in the Automotive
Industry”, ASNT Topical Conference on “Automotive Advances in NDT”,
Birmingham, AL, June 7-9, 2006
62. Alan Still, Jim McNab and Michael Moles, “Optimizing Weld Quality on the
World’s Longest Subsea Pipeline”, World Pipelines, June 2006.
63. Michael Moles, and Simon Labbé, “Special Phased Array Applications for
Pipeline Girth Weld Inspections”, ASME PV&P Conference, Vancouver, July 23-
27, 2006, Paper no. PVP2006-ICPVT11-93565.
64. R. Ginzel, E. Ginzel. J.M. Davis. S. Labbé and M. Moles, “Qualification of
Portable Phased Arrays to ASME Section V”, ASME PV&P Conference,
Vancouver, July 23-27, 2006, Paper no. PVP2006-ICPVT11-93566
65. André Lamarre, Olivier Dupuis and Michael Moles, “Complete Inspection of
Friction Stir Welds in Aluminium using Ultrasonic and Eddy Current Arrays”,
CINDE Journal, vol. 27, no. 4, July/August 2006, p. 14.
66. Michael Moles and Simon Labbé, “Special Phased Array Applications for
Pipeline Girth Weld Inspections”, ECNDT, Berlin, Germany, September 23-27,
2006.
67. Michael Moles, “Qualification of Phased Arrays to ASME Section V and Other
Codes”, ECNDT, Berlin, Germany, September 23-27, 2006.
68. D.A. Hutchins, G. Diamond and M. Moles, “A new capacitive imaging technique
for NDT”, ECNDT, Berlin, Germany, September 23-27, 2006.
69. Jinchi Zhang, Simon Labbé and Michael Moles, “Improved Lateral Focusing for
Thin-walled Gas Pipelines Girth Welds using Phased Arrays”, Proceedings of IPC
2006 International Pipeline Conference, September 25-29, 2006, Calgary,
Alberta, Canada. Paper no. IPC2006-10238
70. J. Mark Davis and Michael Moles, “Resolving Capabilities of Phased Array
Sectorial Scans (S-Scans) on Diffracted Tip Signals”, ASNT Fall Conference,
October 23-27, 2006.
71. Michael Moles, “Entering a new phase in weld inspection - An introduction to
phased arrays”, Practical Welding Today, the Fabricator, October 3, 2006.
72. Michael Moles, “Phased Array Girth Weld Scanners“, Oil and Gas Pipe 3th
Andina de Ductos Conference, Bogotá, Columbia, October 26-27, 2006.
73. Michael Moles and Simon Labbé, “Portable Phased Array Pipeline Girth Weld
Scanner”, PECOM 2006, Villahermosa, Mexico, Nov 7-9, 2006.
74. Michael Moles and Steven Lim, “Phased Array Applications for Pipeline Girth
Weld Inspections“, NDT Corrosion Management and Exhibition, Singapore, Dec
7-8, 2006
75. Michael Moles and Steven Lim, “Portable Phased Array Girth Weld Scanner”,
NDT Corrosion Management and Exhibition, Singapore, Dec 7-8, 2006
76. Michael Moles, “Combating corrosion cracking”, World Pipelines, vol. 7 number
1, January 2007, p. 47.
77. Michael Moles, “Application of Time-Of-Flight Diffraction for Weld
Inspections”, CINDE Journal, November/December 2006, Vol. 27, No. 6, P. 6-13.
78. Michael Moles, “NDE – now, five and twenty years ahead”, Advanced Materials
and Processes, March 2007, vol. 65, no. 3, page 37.
5

79. Michael Moles, “Portable Phased Array Applications”, 5 th IIW Asia Pacific
Welding Congress and 21st AINDT National Conference, Sydney, Australia,
March 7-9, 2007.
80. M. Moles and E Ginzel, “Comparing Weld Inspection Codes: Radiography vs.
Ultrasonics” CINDE Journal, May/June 2007, Vol. 28. No. 3, page 16.
81. Michael Moles, “Phased Array Ultrasonic Inspection of Pipe Welds”, Welding
Insights Program, Edmonton, Alberta, June 18-19, 2007.
82. J. Mark Davis and Michael Moles, “Phased Arrays vs. Phased Arrays - Beam
Sweeping vs. Encoded Data Collection”, Materials Evaluation Back to Basics,
June 2007, page 539.
83. Michael Moles and Robert Ginzel, "Phased Array Inspection of Corroded Bolts",
International Chemical and Petroleum Industry Inspection Technology
Conference, Sponsored by ASNT, Houston, Texas, June 20-23, 2007
84. Michael Moles and Simon Labbé, “A Complete Solution for Weld Inspections –
Phased Arrays and Diffraction Sizing”, Paper # PVP2007-2657, ASME Pressure
Vessel & Piping Conference 2007, July 22-26, 2007, San Antonio, Texas USA
85. Michael Moles, “The Evolution of Phased Array Ultrasonics in Welding”,
Fabricating and Metalworking Magazine, August, 2007.
86. Michael Moles and Simon Labbé, “Ultrasonic Phased Array Inspection of
Offshore Pipelines”, 7th Mexican Conference on NDT, Aug 2007.
87. Michael Moles, “Olympus NDT Training Academy”, 5th International
Conference on Certification and Standardization in NDT Sept 26-27, 2007, Berlin
88. Michael Moles, “Portable Phased Array Girth Weld Scanner”, Rio Pipeline
Conference, October 2-4, 2007.
89. Michael Moles, Simon Labbé and Jinchi Zhang, “Improved Focusing for Pipeline
Girth Weld Inspections using Phased Arrays”, Rio Pipeline Conference, October
2-4, 2007.
90. Michael Moles and Gaetan Fortier, “Phased Arrays for Pipeline Girth Weld
Inspections”, 4 th Pan-American Conference on NDT, Buenos Aires, October
2007.
91. Michael Moles and Robert Ginzel, “Phased Arrays For Detecting Cracking In
Bolts”, 6 th International Conference on NDE for Structural Integrity for Nuclear
and Pressurized Components, Budapest, Hungary, October 8-10, 2007.
92. Michael Moles and Pierre Langlois, “A Complete Solution for Weld Inspections –
Phased Arrays and Diffraction Sizing”, ASNT Fall Conference, Nov 12-16, 2007,
Las Vegas, USA.
93. Tim Armitt and Michael Moles, “Oscillating the Probe: Code Requirements and
TOFD”, Materials Evaluation, November 2007, Vol 65, no. 11, page 1091.
94. Michael Moles and Steven Lim, “Energy Efficiency in NDT of Pressure Vessels
and Welded Components”, Energex, Singapore Nov 27-30, 2007.
95. Keith J. Chizen and Michael Moles, “Phased Array for Piping Inspections Using
ASME B31.3”, 4 th Middle East Conference on NDR, Bahrain, Dec 1-5, 2007.
96. Michael Moles and Robert Ginzel, “Phased Array Inspection of Corroded Bolts”,
4 th Middle East Conference on NDR, Bahrain, Dec 1-5, 2007.
97. Michael D. Moles, “Qualification of Phased Arrays To ASME Section V”, 4 th
Middle East Conference on NDR, Bahrain, Dec 1-5, 2007.
6

98. J. Mark Davis and Michael Moles, “Resolving Capabilities of Phased Array
Sectorial Scans (S-Scans) on Diffracted Tip Signals”, 4 th Middle East Conference
on NDT, Bahrain, Dec 1-5, 2007.
99. Michael Moles and Simon Labbé, “PipeWIZARD Version 4 – A New, Improved
Pipeline AUT Girth Weld Inspection System”, ASNT Spring Conference,
Anaheim, CA, March 31-April 4, 2008.
100. Michael Moles and Jinchi Zhang, “Curved Arrays for Improved Inspection
of Small Pipes”, ASNT Spring Conference, Anaheim, CA, March 31-April 4,
2008.
101. Michael Moles and Dan Kass, “Improved Inspections with Ultrasonic
Phased Arrays”, Quality Measurement Conference 2008, April 28-May 1, 2008,
Clearwater, Florida.
102. Michael Moles, “Phased Arrays: The New Kid on the Block”, NDT
Marketplace, Materials Evaluation, Vol. 66, No. 5, May 2008, P. 26.
103. Michael Moles, “Olympus NDT Training Academy”, NDT.net,
http://www.ndt.net/article/CertNDT2007/Inhalt/v13.pdf.
104. Michael Moles and Simon Labbé, “PipeWIZARD Version 4 – A New,
Improved Pipeline AUT Girth Weld Inspection System”, ASME Pressure Vessel
& Piping Conference, Chicago, July 28-31, 2008, Paper No. PVP2008-61277.
105. J. Halley and Michael Moles, “Advances in the Inspection of Dissimilar
Metal Welds", idem, Paper No. PVP2008-61737.
106. E. Ginzel and M. Moles, “S-scan Coverage with Phased Arrays”,
Materials Evaluation, Vol. 66, Number 8, August 2008, P. 810.
107. M. Moles and S. Labbe, “PipeWIZARD Version 4 – A New, Improved
Pipeline AUT Girth Weld Inspection System”, Proceedings of the 7 th International
Pipeline Conference, IPC2008, September 29 – October 3, 2008, Calgary,
Alberta, Canada. IPC2008-64047.
108. Michael Moles and André Lamarre, “Nondestructive Testing of Friction
Stir Welds”, AWS Friction Stir Welding Seminar, October 8th, 2008, Las Vegas,
NV.
109. Michael Moles and Krishnan Perumal, “ASME Phased Array Inspection
Techniques for Pressure Vessel Welds”, Pressure Vessels Conference, Kuala
Lumpur, Malaysia, October 23-24, 2008.
110. M. Moles, “Pressure Vessel Inspection Codes for Phased Arrays”, idem.
111. M. Moles and K. Perumal, “The Advantages of Automated Ultrasonic
Testing over Radiography”, idem.
112. M. Moles and S. Labbe, “A Complete Solution for Weld Inspections –
Phased Arrays and Diffraction Sizing”, 17 th World Conference on NDT,
Shanghai, Oct 25-28, 2008.
113. M. Moles and J. Zhang, “Curved Arrays for Improved Inspection of Small
Pipe Welds”, 17 WCNDT.
114. M. Moles, “Getting Phased Array Approvals and Certifications”, 17
WCNDT.
115. M. Moles, “Manual phased arrays for weld inspections using North
American codes”, 17 WCNDT
116. M. Moles, “Olympus NDT Training Academy”, 17 WCNDT.
7

117. M. Moles and S. Labbe, “PipeWIZARD Version 4 – A New, Improved
Pipeline AUT Girth Weld Inspection System”, 17 WCNDT
118. E. Sjerve and M. Moles, “IIW Commission VC – Handbook for Phased
Arrays”, ASNT Fall Conference and Quality Testing Show, Nov 10-14, 2008,
Charleston, SC.
119. Jim Halley and Michael Moles, “Advances in the NDT of Dissimilar
Metal Welds”, Materials Evaluation, December 2008, P. 1241.
120. E. Sjerve and Michael Moles, “International Institute of Welding
Commission VC Update”, Materials Evaluation Feature, Materials Evaluation
April 2009, P. 401.
121.
Books Edited:
1. Japanese Tip Echo Handbook, First Edition, by Prof. Harumi, 1989.
2. Introduction to Phased Array Technology Applications, by R/D Tech, 2004.
3. Automated Ultrasonic Testing for Pipeline Girth Welds, by Ed Ginzel, February
2006.
4. Advances in Phased Array Ultrasonic Technology Applications, Olympus NDT –
published Q1, 2007.
5. IIW handbook on “Phased Arrays for Weld Inspections”, to be published.
8