New processing examples - Bernese GNSS Software
New processing examples - Bernese GNSS Software
New processing examples - Bernese GNSS Software
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Defining Standard Processing Files<br />
R. Dach et al.: <strong>Bernese</strong> <strong>GNSS</strong> <strong>Software</strong>: Processing Examples in Version 5.2<br />
Document compiled: Bern, July 2, 2013<br />
• Check this box to switch from type–mean to individual<br />
calibration.<br />
Slide 47 of 86<br />
Astronomical Institute, University of Bern AIUB<br />
Defining the Reference Frame<br />
R. Dach et al.: <strong>Bernese</strong> <strong>GNSS</strong> <strong>Software</strong>: Processing Examples in Version 5.2<br />
Document compiled: Bern, July 2, 2013<br />
BPE–variable to define the reference frame:<br />
(PPP_BAS.PCF, PPP_DEMO.PCF, RNX2SNX.PCF, and CLKDET.PCF)<br />
• V_REFDIR (default: “REF52”)<br />
Directory in the ${D} (DATAPOOL) area where the coordinate and<br />
velocity files for the reference frame are located.<br />
• V_REFINF (default: “IGB08”)<br />
Reference frame files, used as master files when updating coordinate<br />
and velocity files. The corresponding files are expected as<br />
• ${D}/{V_REFDIR}/(V_REFINF)_R.CRD<br />
• ${D}/{V_REFDIR}/(V_REFINF)_R.VEL<br />
• V_REFEPO, only PPP–<strong>examples</strong> (default: “2005 01 01”)<br />
The epoch of the coordinates in the reference frame coordinate file (see<br />
above) needs to be specified here. In case of IGSb08 it is “2005 01 01”.<br />
Slide 48 of 86<br />
Astronomical Institute, University of Bern AIUB