OWNERS MANUAL: Handling & SafeTy inSTrucTionS - Sig Sauer

More documents

Recommendations

Info

4.4 Reloading During Shooting When the last round in the magazine is expended, the slide will be locked back in the open position by the slide catch lever. 1. Depress the magazine catch. 2. Remove the empty magazine. Step 1 Step 2 20 www.sigsauer.com
when it counts 3. Insert a loaded magazine, making sure it is engaged. 4. Release the slide by: a. Pressing down on the slide catch lever or, b. Pulling back on the slide and release Step 3 Step 4 WARNING – LOADED PISTOL The pistol is now loaded and ready to fire. Always make sure the muzzle is pointed in a safe direction! Never attempt to load or unload any firearm inside a vehicle,building, or other confined space (except a properly constructed shooting range). Enclosed areas frequently offer no completely safe direction to point the firearm; if an accidental discharge occurs, there is great risk of bodily injury or property damage. Before loading, always clean all grease and oil from the bore and chamber, and check to be certain that no obstruction is in the barrel. Any foreign matter in the barrel could result in a bulged or burst barrel or other damage to the firearm, and could cause serious injury to the shooter or to others. www.sigsauer.com 21
Page 1 and 2: when it counts ® OWNERS MANUAL: H
Page 3 and 4: when it counts MAINE: “ENDANGERI
Page 5 and 6: when it counts TEXAS: “IT IS UNL
Page 7 and 8: when it counts FIREARMS SAFETY IS
Page 9 and 10: when it counts Topic Page 8.3 Clea
Page 11 and 12: when it counts 1.0 Safety Rules Th
Page 13 and 14: when it counts 2.2 Main Parts 25 2
Page 15 and 16: when it counts 3. Firearms may be
Page 17 and 18: when it counts WARNING - AMMUNITIO
Page 19: when it counts 4.3 Loading the pis
Page 23 and 24: when it counts 5.1 Clearing a Jam
Page 25 and 26: when it counts WARNING - UNLOADING
Page 27 and 28: when it counts 6.2 Unloading the P
Page 29 and 30: when it counts 7.0 Procedures in C
Page 31 and 32: when it counts WARNING - JAMS If y
Page 33 and 34: when it counts 8.1 Pistol Disassem
Page 35 and 36: when it counts 8.2 Magazine Disass
Page 37 and 38: when it counts 8.4 Pistol Assembly
Page 39 and 40: when it counts 8.5 Magazine Assemb
Page 41 and 42: when it counts 1. Ensure the magaz
Page 43 and 44: when it counts 6. Inspect the pist
Page 45 and 46: when it counts 9.2 Magazine Catch
Page 47 and 48: when it counts WARNING - DISASSEMB
Page 49 and 50: when it counts WARNING - ALTERATIO
Page 51 and 52: when it counts 10.3 Elevation (Up/
Page 53 and 54: when it counts 12.0 Service and Pa
Page 55 and 56: when it counts 4. Generally, an in
Page 57 and 58: when it counts This page intention
Page 59 and 60: when it counts 13.0 Parts Diagram
Page 61 and 62: when it counts 14.1 Full Size Spec
Page 63 and 64: when it counts 14.1 Subcompact Spe
Page 65 and 66: when it counts SIG SAUER ® Limite
Page 67 and 68: when it counts Notes: www.sigsauer

OWNERS MANUAL: Handling & SafeTy inSTrucTionS - Sig Sauer

Create successful ePaper yourself

Delete template?

Save as template?