OWNERS MANUAL: Handling & SafeTy inSTrucTionS - Sig Sauer
OWNERS MANUAL: Handling & SafeTy inSTrucTionS - Sig Sauer
OWNERS MANUAL: Handling & SafeTy inSTrucTionS - Sig Sauer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7.1 Troubleshooting Guide<br />
Malfunction Cause Correction<br />
Feed<br />
No round fed into<br />
the chamber<br />
Slide does not close easily<br />
or completely<br />
Magazine not<br />
properly inserted<br />
or magazine is<br />
deformed or dirty<br />
Pistol or cartridge<br />
is fouled (dirty) or<br />
pistol is too heavily lubricated<br />
Incorrect ammunition<br />
Pistol requires service<br />
Extraction/Ejection<br />
After firing, the case Insufficient recoil due to dirt<br />
stays in the chamber or is<br />
jammed in the<br />
Light hold or limp wrist<br />
ejection port<br />
Low-powered ammunition<br />
Pistol requires service<br />
Ignition<br />
Hammer drops but Firing pin obstructed<br />
round does not fire<br />
Faulty ammunition<br />
Pistol requires service<br />
Insert magazine<br />
properly or change<br />
magazine<br />
Clean and lubricate<br />
pistol and/or replace<br />
the ammunition<br />
Replace ammunition<br />
Return to SIG SAUER<br />
Clean and lubricate<br />
the pistol<br />
Solid grip, rigid hold<br />
Change ammunition<br />
Return to SIG SAUER<br />
Inspect, clean and<br />
lubricate the pistol<br />
Manually cycle in<br />
next round<br />
Return to SIG SAUER<br />
30 www.sigsauer.com