OWNERS MANUAL: Handling & SafeTy inSTrucTionS - Sig Sauer

More documents

Recommendations

Info

8.0 Maintenance WARNING – MAINTENANCE Verify the magazine is removed – visually and physically confirm the pistol is unloaded before attempting disassembly or performing any maintenance steps. Failure to ensure the firearm is unloaded could result in unintentional discharge, causing injury or death. VERIFY THE FIREARM IS UNLOADED 32 www.sigsauer.com
when it counts 8.1 Pistol Disassembly 1. Unload the pistol (see section 6.0 “Unloading the Pistol”). 2. Retract the slide to the stop and lock open by engaging the slide catch lever. 3. Verify visually and physically that there is no round in the chamber. 4. Rotate the takedown lever clockwise until the takedown lever can no longer rotate (due to engaging the stop that is incorporated into the frame). 5. Retract the slide slightly to disengage the slide catch lever. Allow the slide to move forward in a controlled fashion. WARNING Slide is under spring tension. Maintain positive control during slide removal to prevent damage or injury. Wear eye protection. 6. Move the complete slide assembly (slide, barrel, recoil spring and guide) forward and off the frame. Step 2 Step 5 Step 4 Step 6 www.sigsauer.com 33
Page 1 and 2: when it counts ® OWNERS MANUAL: H
Page 3 and 4: when it counts MAINE: “ENDANGERI
Page 5 and 6: when it counts TEXAS: “IT IS UNL
Page 7 and 8: when it counts FIREARMS SAFETY IS
Page 9 and 10: when it counts Topic Page 8.3 Clea
Page 11 and 12: when it counts 1.0 Safety Rules Th
Page 13 and 14: when it counts 2.2 Main Parts 25 2
Page 15 and 16: when it counts 3. Firearms may be
Page 17 and 18: when it counts WARNING - AMMUNITIO
Page 19 and 20: when it counts 4.3 Loading the pis
Page 21 and 22: when it counts 3. Insert a loaded
Page 23 and 24: when it counts 5.1 Clearing a Jam
Page 25 and 26: when it counts WARNING - UNLOADING
Page 27 and 28: when it counts 6.2 Unloading the P
Page 29 and 30: when it counts 7.0 Procedures in C
Page 31: when it counts WARNING - JAMS If y
Page 35 and 36: when it counts 8.2 Magazine Disass
Page 37 and 38: when it counts 8.4 Pistol Assembly
Page 39 and 40: when it counts 8.5 Magazine Assemb
Page 41 and 42: when it counts 1. Ensure the magaz
Page 43 and 44: when it counts 6. Inspect the pist
Page 45 and 46: when it counts 9.2 Magazine Catch
Page 47 and 48: when it counts WARNING - DISASSEMB
Page 49 and 50: when it counts WARNING - ALTERATIO
Page 51 and 52: when it counts 10.3 Elevation (Up/
Page 53 and 54: when it counts 12.0 Service and Pa
Page 55 and 56: when it counts 4. Generally, an in
Page 57 and 58: when it counts This page intention
Page 59 and 60: when it counts 13.0 Parts Diagram
Page 61 and 62: when it counts 14.1 Full Size Spec
Page 63 and 64: when it counts 14.1 Subcompact Spe
Page 65 and 66: when it counts SIG SAUER ® Limite
Page 67 and 68: when it counts Notes: www.sigsauer

OWNERS MANUAL: Handling & SafeTy inSTrucTionS - Sig Sauer

Create successful ePaper yourself

Delete template?

Save as template?