Product Range - Herz Valves UK
Product Range - Herz Valves UK
Product Range - Herz Valves UK
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The Insulation strips<br />
made of polyethylene with foil and slits for separation according to DIN 18560.<br />
On one side, on the edge of the foil band is sticky, also available without adhesive.<br />
Model<br />
Set expansion joint for floor screed<br />
Underfloor<br />
EAN<br />
90 04174<br />
Order<br />
number<br />
RDS 8/160 MK, 8 x 160 mm, with adhesive. 99885 0 3 F080 02<br />
RDS 8/160 OK, 8 x 160 mm, without adhesive 99886 7 3 F080 03<br />
Item<br />
4 Rollen<br />
a 25 m<br />
4 Rollen<br />
a 25 m<br />
<strong>Product</strong><br />
group<br />
5<br />
Kit for pipe laying. To secure the distribution of stacking of pipes<br />
on the surface corresponds to DIN 18560. In a double T-profi le<br />
is fi xed Polyethylene fi llet width of 8 mm, which prevents the<br />
movement of pipes. This (2 meter long) self-adhesive profi le allows<br />
you to lay pipes for fl oor heating systems at a distance of 5 cm from<br />
each other. Consists of a 20 m profi le fi llet, 20 meters of the elastic<br />
bands 8/100, 50 pieces of protective tubes 400 mm long.<br />
99887 4 3 F100 00<br />
20 m /<br />
20 m /<br />
50 Stk.<br />
Expansion strip<br />
Double-T profi le of polystyrene, standard length 2 m self-adhesive.<br />
2000 x 35 x 20 mm.<br />
Protection tube for expansion strip<br />
Corrugated pipes 12–18 mm, slit longitudinally.<br />
99888 1 3 F100 01 50 m<br />
99889 8 3 F100 02 50 Stk.<br />
Inlets for expansion strip<br />
Universal expansion strip of polyethylene to prevent<br />
tension and fl anking path and according to DIN 18560, length 2 m.<br />
Fastener strip of polyethylene, 10 x 160 mm, standard length 25 m<br />
99890 4 3 F100 03 50 m<br />
10 x 160 mm, standard length 25 m.<br />
99891 1 3 F100 04<br />
7 Rollen<br />
je 25 m<br />
Polyethylene cover<br />
PE-Folie 0,1, Roll size 25 x 4 m, Stärke 0,1 mm. 99892 8 3 F100 05 100 m 2<br />
PE-Folie 0,2, Roll size 25 x 4 m, Stärke 0,2 mm. 99893 5 3 F100 06 100 m 2<br />
Clamp Strip<br />
Rack rail, U-profi le, special construction for pipes 16 and 17 x 2, extruded fastening rail with formed pipe fastening clips. Easy, compact and low<br />
model prevents weakening of undercoating, suitable for all rigid coatings on top, including plates, natural stones and ceramic coatings, quick<br />
installation with clips. Fastening on thermal insulation by adhesive tape on both sides or by fastening needles via pre-punch. Pipe distance 50 mm.<br />
L x B x H = 200 x 40 x 25 mm.<br />
99972 7 3 F110 18 100 Stk.<br />
Fixing Needles<br />
Fixing needles, red, for direct fastening of insulation thickness<br />
30 mm and higher. Thanks to the special material this fi xing needle<br />
offers the best holding force which can even be increased when<br />
the needle is pushed in diagonally.<br />
Fixing needles, green, for direct fastening of insulation of thickness<br />
40 mm and higher. Thanks to the special material this fi xing needle<br />
offers the best supporting forces which can even be increased<br />
when the needle is pushed in diagonally.<br />
99896 6 3 F110 03 500<br />
99897 3 3 F110 04 500<br />
Tacker Needles<br />
Clips 1622, red, for grid mats,<br />
thickness of support mat 3, 4, 5 mm. 99898 0 3 F110 05 1000<br />
Tacker Needles<br />
Tacker needle for fastening of heating pipe on insulation.<br />
Packed in units of 30 pieces, fastened by scotch tape. Black.<br />
Processing using a stapler setting device 3 F110 13 permits a<br />
simple and effi cient pipe fi tting.<br />
Tacker needle, special model, extra long needles, especially<br />
suitable for non-lined surfaces made of high- quality polyamide, in<br />
units of 30 pieces. Processing using a stapler setting device<br />
3 F110 13 permits a simple and effi cient pipe fi tting.<br />
99899 7 3 F110 06 300<br />
99900 0 3 F110 07 300<br />
137