Max stroke 750 mm - Market

Description for technical specifications
The AL24 feeder supplies low voltage 24V actuators or, if connected to the EVP, it realizes a feeding group for the low voltage 24V actuators.
A relay grants high reliability and safety of the motors. The actuator’s movement is manually controlled through a double push-button or by
a switch. The AL24/2 (4A) and the AL24/5 (10A) may be simultaneously activated by a single control.
The AL24/10 (20A) allows to divide the control in two separate zones according to the installation requirements. The feeding unit is
contained in shockproof plastic. CE marked device complying with the following regulations: EEC 89/336, EEC 73/23 and following
amendments.
Technical characteristics
AL24/2 AL24/5 AL24/10
Power supply voltage
230V 50Hz
Output voltage
24V DC
Max exit current 4 A 10 A 20 A
Service type
S1-continuous
Operating temperature - 5 + 50°C
Weight 2,500 Kg 4,550 Kg 6,750 Kg
Dimensions (mm) 200x250x95 200x250x130 200x250x130
ACK4 that can be connected 2 pcs 5 pcs 10 pcs
C30 that can be connected 3 pcs 7 pcs 14 pcs
C40 that can be connected 3 pcs 9 pcs 18 pcs
SL60 that can be connected 3 pcs 6 pcs 12 pcs
ALTF Feeder with batteries buffer-charged
The system is composed by a stabilized feeder and a couple of batteries, 12 V, connected in series and buffer charged. The unit ensures,
in case of power failure, the power supply of the motors connected to the units for control and ventilation TF21/TF24. CE marked equipment,
complying with the following directives: EEC 89/336, EEC 73/23 and following amendments.
Technical characteristics
ALTF
Power supply voltage
230 V 50Hz.
Output voltage
24/12 V d.c.
Max output current 24V
16 A
Max output current 12V 0.2A
Operating temperature - 5 + 50 ºC
Connectable control units
Series TF
Overall dimensions
L.230Xh.310X130 mm.