Max stroke 750 mm - Market

More documents

Recommendations

Info

TF21/24_TF41/44 Control and power units for actuators at 24V and 230V
Description for technical specifications The new TF21/24 (24V output voltage) and TF41/44 (230V output voltage) control units are designed to feed and control, the connected motors. The actuators may be individually or simultaneously operated when connected to a manual or radio control. With the suitable model we can supply the F33 radio control at 433 Mhz or the F27 infrared remote control. If necessary, the receiver of the infrared remote control can be installed outside the unit (for example,near the manual controls) up to a max. distance of 5 meters. The radio and remote controls work with sequential step system (opening – stop – closing – stop….). Every push button controls the respective motor. The simultaneous pushing of two buttons opens or closes all the connected motors. The RPR rain sensor (12V), the RW wind sensor and the RL light sensor may be connected to these units. The TF21/24 and TF41/44 units are fitted in shock-resistant plastic. CE marked device complying with the following regulations: EEC 89/336, EEC 73/23 and following amendments. Technical characteristics TF21 TF24 TF41 TF44 TF21R/T TF24R/T TF41R/T TF44R/T Power supply voltage 230V~50Hz Output voltage 24V DC 230V Max power consumption 15W 45W 300W 1200W Max absorbed current 0,36A 1,5A 1,3A 5,2A Service type S1 – Continuous Preset for Wind/rain/light sensors, manual control Operating temperature - 5 + 50°C Dimensions (mm) 160x120x75 C20 that can be connected 1pc 4 pcs 2 pcs 8 pcs ACK4 that can be connected - - 4 pcs 16 pcs C30 that can be connected - 1pc 4 pcs 16 pcs C40 that can be connected - 1 pc 5 pcs 20 pcs SL60 that can be connected - 1pc 4 pcs 16 pcs
Page 1 and 2: SL60 Linear stem actuator - Thrust
Page 3 and 4: Description for technical specifica
Page 7: Description for technical specifica
Page 17: RW Wind Sensor_RPR/RPR2 Rain Sensor

Max stroke 750 mm - Market

Create successful ePaper yourself

Delete template?

Save as template?