Bulletin 190 Civil Engineering Testing Equipment - Tinius Olsen

CONCRETE
Consistometer
Motorized Flow Table
System Description
This method is a mechanical variation of
the simple slump test that includes
determination of the workability of
concrete. The concrete is formed in a
slump cone positioned in a container, and
is vibrated at a fixed amplitude and
frequency after the cone is removed, on a
small vibrating table. A plastic spacer
disc on the top surface of the wet
concrete allows the operator to judge
when the compaction is complete. The
time to complete the required vibrations
gives an indication of the workability of
concrete, which is expressed in Vee-Bee
degrees. The consistometer includes a
vibrating table, specimen pot, slump
cone, graduated rod, and acrylic plate.
Applicable Standards
BS 1881 (Part 104:1983), AASHTO T126,
BS EN 12350-3, ASTM C 1170, AS 1012
(Part 3)
System Description
The Flow Table is designed for
determining the workability of Portland
cement concrete. The 76.2 cm diameter
table top is finely machined from a solid
brass casting; the stand is made from
cast iron. Operation is simple, where the
ground and hardened steel cam is
designed to drop the table by 12.5 mm.
Applicable Standards
AASHTO T126
Ordering Information
TO-336-01 Motorized Flow Table, 110V,
60Hz, 1 Ph
TO-336-02 Motorized Flow Table, 220V,
60Hz, 1 Ph
TO-336-03 Motorized Flow Table, 220V,
50Hz, 1 Ph
Ordering Information
TO-335-02-ASTM Consistometer per
ASTM 415 V, 60 Hz
TO-335-03-ASTM Consistometer per
ASTM 415 V, 50 Hz
TO-335-02-BS Consistometer per BS,
415 V, 60 Hz
TO-335-03-BS Consistometer per BS,
415 V, 50 H
29
Contact us at: sales@TiniusOlsen.com