Bulletin 190 Civil Engineering Testing Equipment - Tinius Olsen

Ordering Information for Mold
TO-11201 Proctor compaction mold for
light compaction,105mm id x 115.5mm
height to BS standards
Specifications for Rammer
Rammer weight – 2.5 kg
Drop height – 300 mm
Guide sleeve – Machined steel tubing
with air pressure release holes
Finish – Corrosion resistant
Ordering Information for Rammer
TO-11202 Compaction Rammer for Light
Compaction 2.5kg x 300mm Fall to BS
standards
Proctor Compaction Apparatus
(BS): Compaction Test 4.5 kg
Description
This test method utilizes a 4.5 kg hand
rammer resulting in approximately 4.5
times greater compactive energy being
applied to the sample with the heavier
rammer. This method is often specified
where higher levels of compaction are
necessary in a structure, e.g. an airfield
sub-base material.
NOTE: Manufactured from corrosion
protected steel components the 4.5 kg
rammer is designed to withstand heavy
usage involved in the test method.
Specifications for Mold
Mold volume – 2,305 ml
Dimensions – 152 mm ID by 127 mm
height
Construction – All steel, with plated
threaded studs and wing nuts
Ordering Information
TO-11201- H Compaction Mold for
Heavy compaction,152mm ID x 127mm
Height to BS standards
Specifications for Rammer
Rammer weight – 4.5 kg
Drop height – 450 mm
Guide sleeve – Machined steel tubing
with air pressure release holes
Finish – Corrosion resistant
Ordering Information
TO-11202 H Compaction Rammer for
Heavy Compaction 4.5kg x 450mm fall to
BS standards
www.TestingConcrete.com 96