SEMI AUTOMATIC STRETCH WRAPPING GL 205 / 215 HS WWW ...

Stretch Wrapper GL 205 / 215 HS
Wraps 15-50 loads per day. Wraps irregular shaped loads. Uses forktruck/palletjack to load the stretch wrapper.
The operator starts the wrapping cycle at the machine and manually cuts/attaches the film.
The versatile Cyklop wrapper for a wide range of applications. The development of the GL 205/215 with the
patented Ecostretch system, have been based on years of experience. Together with the equipment options and the
varieties of settings they offer, optimum adaptations to any requirements and thus provide the new stretch wrapper
series with a high level of cost-effectiveness.
These properties guarantee not only good load securement but also minimum material costs, i.e. low film
consumption. With the GL 215 you have the possibility to regulate the application of tension (force of applying the
film to the product).
Easy to operate
Controls are easy to find and understand.
Foldable mast and fork lift truck voids are fitted
for easy in-transport and good mobility
Film roll change fast and simple.
Automatic load height sensor.
Air supply not needed.
Saves money
Pre-stretch ratio is adjustable up to 210/300%.
Patent approved system,
The chosen prestretch ratio stays constant,
which guarantees a consistent low film,
consumption, load after load.
Film carriage speed is individually adjustable to
minimize film overlap.
Motorized prestretch device minimizes film
consumption and protects delicate goods.
Consistent packaging result
Flexible setting possibilities enable optimum
packaging for a variety of goods.
The film tension is automatically controlled
which gives an even cover around the goods.
Several standard programs are available, e g
with top sheet for protection against water.
4 programs are factory preset.
Key features
Ramp can be attached in three directions.
Easy change of all program parameters and
settings.
Allows operator to easily load turntable with
palletjack. Ramp is easily removable to allow
forktruck loading.
The photocells stops the machine if the beam
is broken.
Subject to Modification. Protectory notice persuant to ISO 16016 to be observed. © Copyright Cyklop GmbH, Cologne, Cyklop Teknik AB - PBE
961016EN - 2012
WWW.CYKLOPTEKNIK.SE
SEMI AUTOMATIC STRETCH WRAPPING
GL 205 / 215 HS

D:\Vault_WF\Designs\Mek\hand toppfilmare\210081.iam
250
250
D:\Vault_WF\Designs\Mek\hand toppfilmare\210080.iam
Ø250
ISSUED BY BURTECH AB
1000-1600 mm
ISSUED BY BURTECH AB
STRETCH WRAPPER GL 205 / 215 HS
Overview and dimensions
STRETCH WRAPPER GL 205 / 215 HS
Specification
Air supply not needed
Top plate
(option)
Cyklop’s patented
with
adjustable prestretch system up to 300%
GL 205 HS
GL 215 HS
Machine Table diam Ø1650 mm
Table speed
Up to 10,5 r/m adjustable
Soft start / stop
Electronically run
Bottom/top wrappings 1–3 1–6
Film carriage speed
Variable film overlapping top and bottom
Pre-stretch system
Power
Pallet Goods
Stretch Film
Pre-stretch ratio on
the Ecostretch unit
Stretch wrapping programs
Controller
Supply
Protection
Loading
Max size (length x width)
Max. goods height incl. pallet:
Permitted load weight
Core diameter
Outer diameter, max
Film width, max
Film thickness
GL 205: 1, 25, 45, 65, 90, 135, 170 or 210 % adjustable
GL 215: 30, 60, 80, 110, 145, 200, 250 or 300 % adjustable
4 standard, 2 options
Siemens PLC
3-phase 400 V+N+PE, 50 Hz
IP54
16 A
1200 x 1200 mm
Up to 2200 mm (standard machine)
Up to 1200 Kg
76 mm
250 mm
500 mm
9-35 my
The photocells stops the machine
if the beam is broken.
Easy loading of turntable with palletjack. Ramp is
removable and can be attached in three directions
with our
system (Left,
right and front).
Selected options
1
2
3
4
5
6
7
B
C
Extended mast (load height 2600 mm)
Top film cassette
1-phase 220V
Low temperature
A
Extra corrosion protection
1
2
3
1750
4
A
B
5
C
D
1750
1300 /1600
6 7
8
9
10
A
D
B
1300 / 1600
E
B
C
C
A
E
D
E
F
G
D
E
Dim (mm) A B C D E F G
G
Standard 85 2540 2675 Ø1650 440 990 625
F
Option 2995
Weight, standard: 500 kg (Weight can vary depending on options). Crated dimensions: L2900 x H1050 x W1800 mm, weight: 650 kg.
The stringroller is an option
to press up the bottom of
the film width to a string.
F
Top plate, rectangular/round.
To increase the stability of the cargo.
G
H
Floor/wall mounted top film dispenser.
Designed by
mjo
F
When 1 palletized 2
3goods need 4 protection
5
6
from dust/water or dampness.
G
Drawn by Approved
mjo
7
H
1
2
3
4
5
Designed by Drawn by Approved by Rev. no Standard
Scale
mjo mjo
A3
TOP SHEET DISPENSER
FOR WALL COMPLETE
6 7
8
9
Replace
File name
210081.iam
Drawing no.
210081
Replaced by
Date
2005-03-10
10
H