Green Diode-Pumped Solid-State Laser Systems (Hardware)
Green Diode-Pumped Solid-State Laser Systems (Hardware)
Green Diode-Pumped Solid-State Laser Systems (Hardware)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Service, Support, and Warranty<br />
The following fuse, located in the power supply is to be replaced only by<br />
Melles Griot certified service personnel.<br />
Fuse: T 6.3 A/250 V, 1500 A interrupt capacity, 5x 20mm<br />
D4 <strong>Laser</strong> Safety Warnings<br />
The following labels shown in Figure D-1 are required by the U.S. Food<br />
and Drug Administration, Center for Devices and Radiological Health<br />
(CDRH) as well as by the standard, EN60825-1:1994. Figure D-2 shows<br />
the location of these labels on the 58 Series DPSS laser system.<br />
Figure D-1<br />
58 Series label<br />
locations.<br />
LASER RADIATION<br />
AVOID EYE OR SKIN EXPOSURE TO<br />
DIRECT OR SCATTERED RADIATION<br />
CLASS 4 LASER PRODUCT<br />
MAXIMUM OUTPUT POWER:<br />
5 WATTS AT 532nm<br />
10mW AT 1064 nm<br />
CLASSIFICATION PER<br />
EN60825-1: 1994<br />
AVOID EXPOSURE<br />
LASER RADIATION IS<br />
EMITTED FROM THIS<br />
APERTURE<br />
40
Change language