CCS C Compiler Manual PCB / PCM / PCH

Example Programs
Uses addressmod to create a user defined storage space, where a new qualifier is created that
reads/writes to an extrenal RAM device.
EX_FAT.C
An example of reading and writing to a FAT file system on an MMC/SD card.
EX_FLOAT.C
Shows how to use basic floating point
EX_FREQC.C
A 50 mhz frequency counter
EX_GLCD.C
Displays contents on a graphic LCD, includes shapes and text.
EX_GLINT.C
Shows how to define a custom global interrupt hander for fast interrupts
EX_HPINT.C
An example of how to use the high priority interrupts of a PIC18.
EX_HUMIDITY.C
How to read the humidity from a Humirel HT3223/HTF3223 Humidity module
EX_ICD.C
Shows a simple program for use with Microchips ICD debugger
EX_INTEE.C
Reads and writes to the PIC internal EEPROM
EX_INTFL.C
An example of how to write to the program memory of the PIC.
EX_LCDKB.C
Displays data to an LCD module and reads data for keypad
EX_LCDTH.C
Shows current, min and max temperature on an LCD
EX_LED.C
Drives a two digit 7 segment LED
EX_LINBUS_MASTER.C
An example of how to use the LINBUS mode of a PIC's EAUSART. Talks to the
EX_LINBUS_SLAVE.C example.
EX_LINBUS_SLAVE.C
An example of how to use the LINBUS mode of a PIC's EAUSART. Talks to the
EX_LINBUS_MASTER.C example.
EX_LOAD.C
373