Agilent ADNS-2051 Optical Mouse Sensor

More documents

Recommendations

Info

X MOTION TO THE RIGHT Y MOTION UP XA/YA FIVE OR MORE 133 µs 133 µs 133 µs 133 µs 133 µs XB/YB XA/YA FOUR 133 µs 133 µs 133 µs 267 µs XB/YB XA/YA THREE 133 µs 133 µs 400 µs XB/YB XA/YA TWO 133 µs 533 µs XB/YB XA/YA ONE 667 µs XB/YB ~ 667µs @ 1500 FRAMES/SECOND ONE FRAME Figure 16. Quadrature states per frame (400 cpi mode). 12
X MOTION TO THE RIGHT Y MOTION UP XA/YA TEN OR MORE 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs XB/YB XA/YA NINE 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 133 µs XB/YB XA/YA EIGHT 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 200 µs XB/YB XA/YA SEVEN 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 266 µs XB/YB XA/YA SIX 66.7 µs 66.7 µs 66.7 µs 66.7 µs 66.7 µs 333 µs XB/YB ~ 667µs @ 1500 FRAMES/SECOND ONE FRAME Figure 17. Quadrature states per frame (800 cpi mode). 13
Page 1 and 2: Agilent ADNS-2051 Optical Mouse Sen
Page 3 and 4: Overview of Optical Mouse Sensor As
Page 5 and 6: SERIAL PORT SCLK SDIO SERIAL PORT O
Page 7 and 8: Alternative Application using Quadr
Page 9 and 10: ADNS-2051 HDNS-2100 Z OBJECT SURFAC
Page 11: PD Pin Timing PD I DD t pd 75 FRAME
Page 15 and 16: Quadrature State Machine The follow
Page 17 and 18: Synchronous Serial Port The synchro
Page 19 and 20: Forcing the SDIO Line to the Hi-Z S
Page 21 and 22: Error Detection and Recovery 1. The
Page 23 and 24: SPI communication code for the Cypr
Page 25 and 26: mov A, 0h ; clear the data mov [spi
Page 27 and 28: or [port1_wrote], A mov A, [port1_w
Page 29 and 30: Field Name MOT Reserved FAULT OVFY
Page 31 and 32: Average_Pixel Address: 0x06 Access:
Page 33 and 34: Data_Out_Lower Address: 0x0c Access
Page 35 and 36: Pixel Dump Pictures The following i
Page 37 and 38: The maximum value of the shutter is
Page 39 and 40: Optical Mouse Design References App

Agilent ADNS-2051 Optical Mouse Sensor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?