Impact Wrenches - Longin Parkerstore

2
Belt Sanders
10 mm belts
2
20 mm belts
30 mm belts
Large belt sander with removable side handle.
The fast-tensioning mechansim allows the exchange of sanding
belts by one hand. The delivery includes two sanding
belts.
For a most ergonomic working position the handle can be
adjusted in its angle towards the belt.
30 x 540 mm belt sander, long
sanding belt 30x540 mm grain 80
sanding belt 30x540 mm grain 120
sanding belt 30x540 mm grain 180
sanding belt 30x540 mm grain 240
Model Width of
Abrasives
Min. Length of
Piece of Abrasive
2
Small belt sander with three heavy duty belts especially
for confined areas.
The fast-tensioning mechansim allows the exchange
of sanding belts by one hand.
For a most ergonomic working position the handle
can be adjusted in its angle towards the belt.
10 mm belt sander
sanding belt 10x330 mm grain 40
sanding belt 10x330 mm grain 80
sanding belt 10x330 mm grain 120
sanding belt 10x330 mm grain 180
sanding belt 10x330 mm grain 240
Model Article no.
7157 8951072061
8951011592
8951011593
8951011594
8951011595
Speed Weight Inner Hose
Diameter
Model Article no.
7155 8951072041
Both tools can be used 100% into corners
since the arm does not disturb on the side
of the belt.
• long version for higher efficiency
• short version for confined areas
Sanding belts
High-quality abrasive belts with
zirconia alumina / aluminium oxide for
high efficiency and durabilty.
Suited for all metals.
Less discolouration due to cold
abrasion thanks to many additives.
With high edge stiffness.
Please see also page 61
The fast-tensioning mechansim allows the exchange of sanding belts by one hand.
For a most ergonomic working position the handle can be adjusted in
its angle towards the belt. Continuous work is made more comfortable due
to a broad resting plate for the second hand.
20 x 520 mm belt sander, long
20 x 480 mm belt sander, short
sanding belt 20x520 mm grain 80
sanding belt 20x520 mm grain 120
sanding belt 20x520 mm grain 180
sanding belt 20x520 mm grain 240
Model Article no.
7156 8951072051
7158 8951072071
20 mm sanding finger
Finger sander for use of 20 mm abrasive tape from roll
(for sanding and use on files) – the abrasive can be
clamped onto the finger. Back and forth movements of the finger are
especially well suited for sanding in slots and gaps when sanding into
corners is necessary.
The thickness of the finger with abrasives is 10 mm minimum.
The tool can be equipped like model 6900 with files,
see page 26/58
air finger sander with finger
finger for abrasives 19 x 63 x 9,5 mm
Dimension
a x b x c x d
8951011604
8951011570
8951011577
8951011578
8951011579
Air Consumption
average – continuous
8951011580
8951011581
8951011582
8951011583
2
Model Article no.
6910 8951075020
6902 8951011530
Air Inlet Duty Level Noise
LpA
Vibration
[mm] [mm] [Rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²]
6910 20 150 3700 1.1 8 170x38x28 120 170 1/4" IG 2 79.5 4.62
7155 10 330 18000 0.8 8 285x37x22 400 520 1/4" IG 2 83.2 < 2.5
7156 20 520 17000 1.15 8 353x44x35x22 400 520 1/4" IG 2 91.6 < 2.5
7157 30 540 13000 2.2 8 420x78x45 530 660 1/4" IG 2 79.8 4.54
7158 20 480 17000 1.1 8 335x44x35x22 400 520 1/4" IG 2 86.9 < 2.5
max. pressure 6.3 bar (90 psi) IG: female thread
37 norms applied : noise according to ISO15744 (K =K =1,7 dB), vibration 3-axis according to ISO28927-3, for LwA-values see page 69.
PA WA