Impact Wrenches - Longin Parkerstore
Impact Wrenches - Longin Parkerstore
Impact Wrenches - Longin Parkerstore
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
41<br />
Polishers<br />
straight polisher with 100 mm<br />
with regulator<br />
composite<br />
2<br />
sisal wheel<br />
For Smart repairs -<br />
paint repairs limited to a small area,<br />
saving time and consumables.<br />
Lightweight and handy tool with composite<br />
housing. Speed regulator with thumb knob<br />
for one hand operation. Air exhaust down<br />
motor housing.<br />
angle polisher 178 (7") mm – 5/8“<br />
angle polisher 178 (7") mm – M14x2<br />
polishing pad 170 mm – 5/8“ (round rim)<br />
lamb wool bonnet with straps<br />
For more polishing accessory range see box on right<br />
Polisher with powerful planetary gear and rear exhaust<br />
including an adapter for a silencing exhaust hose system.<br />
The 100 x 100 mm sisal wheel is especially well suited for<br />
long surfaces e.g. square profiled plastics, wood or aluminium,<br />
like used for windows, frames etc. The handle can<br />
be covered with a cold-insulating sleeve (KS4)<br />
straight polisher<br />
sisal wheel 100 x 100 mm<br />
Model Article no.<br />
polisher kit<br />
Set 7683K consists of air tool and:<br />
7683K 8951000017<br />
1 pc. 75 mm (3”) velcro pad<br />
1 pc. polishing sponge white 75 mm (3”)<br />
1 pc. polishing sponge yellow 75 mm (3”)<br />
1 pc. polishing wool pad 75 mm (3”)<br />
8955000006<br />
flat head ergonomically optimised<br />
for confined areas for accessory up<br />
to 178 (7") mm<br />
3<br />
Model Article no.<br />
7130 8951072004<br />
7131 8951072014<br />
8951011549<br />
8951011550<br />
Model Article no.<br />
4690 8951073060<br />
100SL 8951011606<br />
Large angle polisher with special low head design, available with thread<br />
type 5/8“ and M14x2. Equipped with an insulating handle cover for continous polishing and<br />
rear exhaust to guide away cold exhausted air. The variant with 5/8“ thread includes a high quality polishing pad<br />
with completely rounded rim and a lamb wool bonnet with straps to tie.<br />
Model Drive Power Speed Weight Inner Hose<br />
Diameter<br />
Dimension<br />
a x b x c<br />
Air Consumption<br />
average – continuous<br />
Polishing Systems<br />
The complete range of polishing<br />
accessory can be found on page 62<br />
75 mm – velcro - 5/16“<br />
disc + sponge<br />
8951011560 + 8951011555<br />
150 mm – velcro – 5/8<br />
150 mm<br />
disc + sponge<br />
8951011554 + 8951011587<br />
150-170 mm – to tie - 5/8“<br />
disc / sponge<br />
8951011551<br />
170 mm<br />
160 mm<br />
disc (rounded) + lamb wool (to tie)<br />
8951011549 + 8951011550<br />
disc (super soft) + lamb wool (to tie)<br />
8951011552 + 8951011550<br />
Air Inlet Noise<br />
LpA<br />
Spindle Disc [mm] [W] [Rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²]<br />
4690 Sisal brush:100<br />
500 2000 1.30 8 160x40x42 380 510 1/4" IG 79.1 4.32<br />
7130 5/8" AG 178 500 2500 2.0 8 320x38x100 525 700 1/4" IG 80.8 6.88<br />
7131 M14 x 2 AG 178 500 2500 2.0 8 320x38x100 525 700 1/4" IG 80.8 2.68<br />
7183K<br />
5/16"-<br />
24UNF IG<br />
75V (3") 150 5500 0.6 8 125x125x42 360 480 1/4" IG 78.5 3.8<br />
max. pressure 6.3 bar (90 psi) V: velcro sanding pad IG: female thread AG: male thread<br />
norms applied : noise according to ISO15744 (K PA =K WA =1,7 dB), vibration 3-axis according to ISO28927-3, for LwA-values see page 69.<br />
disc + felt<br />
8951011560 + 8951011556<br />
disc (rounded) + lamb wool (velcro)<br />
8951011554 + 8951011586<br />
Vibration
Change language