Impact Wrenches - Longin Parkerstore

39
2
Angle Grinders
2
for mini cutting discs
70 or 76x10 mm
direct drive
Mini cutting grinder ready equipped with a
75x10x1,5 mm cutting disc and protective guard
made of steel. With safety lever and rear exhaust.
mini cutting grinder
mini cutting discs
Model Article no.
7190 8951075101
70TR 8951011536
for 115 (4 ½") and 125mm (5") discs
for 100mm (4") discs
combination tool 50 mm
direct drive
Practical set with abrasives for
spot work in two steps:
fine sanding of paint, rust and
coarse grinding like preparation and
trimming of small weldings in confined areas.
• cold removal of paint and rust with abrasive surface conditioning
material - scm (Roloc).
• coarse grinding of metal e.g. welding seams with mini grinding wheels.
The set contains all necessary flanges and accessory with a Roloc backing pad. The
inner thread 5/16" can also be used for small sanding pads.
mini combi set
surface conditioning material-scm 50 mm Roloc
backing pad Roloc also for scm 50 mm
threaded adapter for backing pad
mini grinding wheel 50 mm
flange set for mini grinding wheel
Set 7164 consists of:
1 mini combi grinder, 1 Roloc backing pad 50 mm
with threaded adapter, 2 surface conditioning
material discs 50 mm, 2 grinding wheels 50 mm,
flanges, 3 different keys for exchange of accessory,
1 safety goggles, 1 tool box.
Very famous and compact type of angle grinder with safety speed governor, protective guard and flanges. The side handle for
additional control can be taken off for confined areas. Very versatile for many applications like sanding with flap discs, grinding,
cutting. Available for 16 or 22 mm centre hole accessories or pads and brushes with thread e.g. small M14x2 cup brushes and
radial brushes as well as backing pads for use of normal and velcro fibre discs up to 125 mm (guard removable). Can be delivered
alternatively with two types of thread M10x1,5 and M14x2 two sorts of flanges 16 and 22 mm as well as for three sizes of
discs 100x16 mm (4“) and 115x22 mm (4 ½“) / 125x22 mm (5“):
angle grinder M14 x 2 for discs 115 (4½")/125(5") x 22 mm
angle grinder M10 x 1,5 for discs 115 (4½")/125(5") x 22 mm
angle grinder M10 x 1,5 for discs 100 (4")x 16 mm
cutting discs 115 (4½")x 22 mm
grinding discs 115 (4½")x 22 mm
cutting discs 100 (4")x 16 mm
grinding discs 100 (4")x 16 mm
Model Drive Power Speed Weight Inner Hose
Diameter
Model Article no.
7166 8951075051
7165 8951075041
7160 8951075021
115TR 8951011539
115SCH 8951011542
100TR 8951011537
100SCH 8951011540
Dimension
a x b x c
Air Consumption
average – continuous
2
Model Article no.
7164 8951175001
7164DS 8951011620
7164DSA 8951011621
7164ADA 8951011622
7164S 8951011618
7164SA 8951011619
Air Inlet Noise
LpA
Spindle Disc [mm] [W] [Rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²]
7160 M10 x 1.5 AG 100 x 16 750 10000 1.6 8 232x93x47 490 650 1/4" IG 85.2 4.56
Vibration
7164
5/16‘‘ x 24 IG
3/8‘‘ x 24 IG
5/16‘‘ x 24 IG
1/4‘‘ x 20 IG
50 x 10
50
350 7800 0.8 8 170x120x40 300 400 1/4" IG 85.4 < 2.5
7165 M10 x 1.5 AG
115x22
125x22
750 10000 1.6 8 232x93x47 490 650 1/4" IG 83.8 8.45
7166 M14 x 2.0 AG
115x22
125x22
750 10000 1.6 8 232x93x47 490 650 1/4" IG 85.6 5.69
7190 -- 70 x 10 350 20000 0.8 8 195x80x40 430 580 1/4“ IG 89.5 3.53
max. pressure 6.3 bar (90 psi) IG: female thread AG: male thread
norms applied : noise according to ISO15744 (KPA =KWA =1,7 dB), vibration 3-axis according to ISO28927-1, for LwA-values see page 69.