Impact Wrenches - Longin Parkerstore

maintenance units (5 micron)
spray painting unit (0,01 micron)
power regulator °
swivel air joint °
characteristics
(in-out)
grease and mini grease pumps
(reduces power and speed).
° for connection into tool air inlet IG: female thread AG: male thread
(for best operatability in confined areas)
° for connection into tool air inlet IG: female thread AG: male thread
Maintenance Units, Water Separators,
Filters, Regulators, Lubricators, Lubricants
Delivers clean, dry and lubricated air at constant pressure for air tools and other compressed air activators:
water separator with automatic drain, filter element with 5 micron, micro-fog lubricator with flow sensor for almost constant
oil/air ratio for several air tools in use, oil sight dome allows 360° visibility as well as simple adjustment and installation,
metal bowls with bajonet quick release and prismatic full level sight windows for high inlet pressure and increased safety,fast
element clamping system allows front access and individual removal of elements, wall fixation bracket
2 piece slim version : water separator – filter – regulator and gauge + lubricator
3 piece low height version : water separator – filter + regulator and gauge + lubricator
special heavy duty grease for
DUOPACT, SH, DH and
CH impact systems
model article no.
model article no.
8150 F, grease pump, filled
8150 grease pump, incl. 2 cartridges
8150 K, 5 cartridges, filled
8160 mini grease pump
thread
(inch)
pressure
(IN / OUT)
(bar)
max. air
flow rate
(l/min)
oil
capacity
(ml)
1/4“ G 10 / 0-10 2220 100
inline lubricator °
inline filtre °
pressure tester
Lubricants for air tools
special air lubricant
(contains silicone)
impact system oil
(for pin-clutch type)
construction dimension
axbxc
(mm)
www.rodcraft.com
c
b
model article no.
(for mobile use e.g. on construction sites)
characteristics
(in-out)
* oil capacity ** adjustable
IG: female thread AG: male thread
b
model article no.
1/2“ G 17 / 0-10 3000 200
255x150x125 MD2-12 8940168576
255x232x125 MD3-12 8940168577
operating temperatures -20°C* – 65°C (**-34°C* – 80°C)
* air supply must be dry enough to avoid ice formation at temperatures below 2 °C
Delivers extremely clean and oil-free, dry air at constant pressure for spray guns and other oil-free running air tools :
water separator with automatic drain, filter element with 5 micron, high efficiency oil and particle removal filter element with 0,01 micron
(oil removal class level 2 – 0,01 mg/m³) and filter service indicator shows red when filter needs replacement, air distribution block with 3x1/4
outlets, metal bowls with bajonet quick release and prismatic full level sight windows for high inlet pressure and increased
safety, fast element clamping system allows front access and individual removal of elements, wall fixation bracket
water separator – filter – regulator and gauge + coalescing filter + distribution block
c
thread
(inch)
pressure
(IN / OUT)
(bar)
max. air
flow rate
(l/min)
oil
capacity
(ml)
construction dimension
axbxc
(mm)
3 piece**
1/2“ G 17 / 0 - 10 3000 200 327x245x125 MD2LAK-12 8940168482
operating temperatures -20°C* – 65°C * air supply must be dry enough to avoid ice formation at temperatures below 2 °C
1/4" IG – 1/4" AG AR 1 8951011858
1/4" IG – 1/4" AG DG 1 R 8951011860
1/4" IG – 1/4" AG DG 1 8951011859
1/4" IG – 1/4" AG DG 1 R 8951011860
8951012205
8951012204
8951012206
8951012208
G1K
G1G
220x107x100 MN2-14 8940168574
220x165x100 MN3-14 8940168575
model article no.
1/4" IG - 1/4" AG (4 ml*) G 1 K 8951011851
1/4" IG - 1/4" IG (28 ml*) G 1 G 8951011852**
3/8" IG - 3/8" IG (28 ml*) G 2 8951011853**
1/2" AG - 1/2" AG (28 ml*) G 3 8951011854**
1/4" IG - 1/4" AG (12 ml*) G 1 M 8951011856
1/4" IG – 1/4" AG F 1 G 8951011855
(3/8" IG) DT 028 8951011829
model article no.
1000 L, 1 litre air lubrication oil in bottle with nozzle 8951011861
1000 S, 1 litre impact system oil in bottle with nozzle 8951011862
a
66
a