Impact Wrenches - Longin Parkerstore

More documents

Recommendations

Info

Obital Block Sanders 2 – 5 mm stroke medium size pads 3 Versatile palm block sander with proven hard chromed air motor and rear exhaust. The perforated velcro pad is additionally equipped with clamps. Model 7710V has a non-perforated velcro pad. Model 7715V is equipped with a perforated velcro pad and a flat 29 mm suction port for use with external dust extraction systems. 7730V 170 mm 5 mm orbital block sander (non-perforated) 5 mm orbital block sander (for dust extraction) 5 mm universal stroke 95 x 170 mm sanding pad perforated / non-perforated / with self-induced suction SUPERTECH industrial motor 95 mm 5 mm universal stroke 95 x 170 mm sanding pad perforated / plain 3 Model Article no. 7710V 8951072191 7715V 8951072252 Small palm block sander with 5 mm stroke and proven hard chromed air motor. The non-perforated sanding pad is additionally equipped with clamps. Rear exhaust. 5 mm orbital block (non-perforated) 7730V 170 mm 3 95 mm 5 mm universal stroke 70 x 125 mm sanding pad 3 Model Article no. 7700V 8951072181 Two hand orbital block sander for universal use with high quality SUPERTECH industrial motor (speed adjustable) and rear exhaust. The perforated velcro pad is additionally equipped with clamps. Model 7720V has a non-perforated velcro pad. Model 7730V with perforated velcro pad and a 29 mm suction port for use in combination with dust-extraction systems. For sanding autonomously - just with compressed air - the tool has also a self-induced suction, dust bag and 1,5 m dust hose. Model Article no. 5 mm orbital block sander (non-perforated) 7720V 8951072201 5 mm orbital block sander 7730V 8951072262 (for dust-extraction / with self-induced dust-extraction) Punch plate (for model 7730V, for normal papers) 8951011596 Model pad Stroke Speed orbital Weight Inner Hose Diameter Dimension a x b x c Air Consumption average – continuous Air Inlet Duty Level Noise LpA [mm] [mm] [Rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²] 7700 V 70 x 125 max. pressure 6.3 bar (90 psi) V: velcro sanding pad C: pad with clamps IG: female thread 49 norms applied : noise according to ISO15744 (KPA =KWA =1,7 dB), vibration 3-axis according to ISO28927-1, for LwA-values see page 69. VC 5 10000 1.10 8 180x125 360 480 1/4“ IG 3 79.1 5.38 7710 V 95 x 170VC 5 10000 1.45 8 202x130 360 480 1/4“ IG 3 81.2 9.81 7715 V 95 x 170VC 5 10000 1.55 8 202x130 360 480 1/4“ IG 3 82.1 8.06 7720 V 95 x 170VC 5 10000 1.70 8 320x130x50 360 480 1/4“ IG 3 78.1 12.55 7730 V 95 x 170VC 5 10000 1.70 8 320x120x46 360 480 1/4“ IG 3 80.3 9.73 Vibration
7451V 400 mm 5 mm universal stroke 115 x 210 mm sanding pad SUPERTECH industrial motor 3 70 mm Large Orbital Sanders, 5 - 8 mm stroke Long Sander, Linear Sander 3 7750V 210 mm 115 mm www.rodcraft.com perforated velcro pad for dust extraction Extremely robust two hand orbital block sanders for large surfaces and continuous dry sanding. With high quality SUPERTECH industrial motor and rear exhaust (speed adjustable from the handle). Cold-insulated handle for comfortable, continuous work. Model 7740V with non-perforated velcro pad and clamps. Model 7750V with perforated velcro pad and clamps. The ergonomically places front handle balances the weight of the user's hands for best sanding results. The 29 mm (nominal) metal suction port is extra large for professional dry sanding using an external dust-extraction system. 5 mm orbital block sander (non-perforated) 5 mm orbital block sander (for dust-extraction) 400 x 70 mm perforated velcro pad 5 mm orbital block sander for dust extraction SUPERTECH industrial motor Model Article no. 7740V 8951072211 7750V 8951072272 400 x 70 mm sanding pad 25 mm linear sander/body file Both sanders have the same pad format but they are very different: Model 7451 for large surface sanding and profiling with 5 mm orbital stroke. Suited for continuous work due to high quality SUPERTECH industrial motor, rear exhaust (speed adjustable on the handle) and cold-insulating handles. Perforated velcro pad and flat 29 mm (nominal) suction port for use of external dust extraction systems. Model 7500 makes forward-reverse movements for profiling and sanding of surfaces with lots of filler (e.g. repairs of dented car doors). The sander is equipped with a non-perforated long sanding pad and clamps for normal abrasives. 5 mm orbital block sander Achtung für diese (for Schleifplatte dust-extraction) wurden alle Strichstärken und Abstände halbiert dargestellt. 25 mm linear sander (non-perforated) Model Pad Stroke Speed orbital Model Article no. 7451V 8951072102 8951011590 7500 8951072101 Weight Inner Hose Diameter 8 mm coarse sanding 95 x 170 mm sanding pad Small aggressive sander with large 8 mm stroke and adjustable speed. The sanding pad is equipped additionally with clamps for use of normal abrasives. 8 mm orbital block sander Dimension a x b x c Air Consumption average – continuous 3 Model Article no. 7300 8951072091 Air Inlet Duty Level Noise LpA [mm] [mm] [Rpm] [kg] [mm] [mm] [l/min] [inch] [dB(A)] [m/s²] 7300 95 x 170 max. pressure 6.3 bar (90 psi) V: velcro sanding pad A: tough sanding pad surface for self-adhering abrasives C: pad with clamps IG: female thread norms applied : noise according to ISO15744 (K =K =1,7 dB), vibration 3-axis according to ISO28927-1, for LwA-values see page 69. PA WA C 8 8500 1.95 8 180x130 300 380 1/4“ IG 2 82.8 4.05 7740 V 115 x 210VC 5 10000 2.25 8 336x143x55 360 480 1/4" IG 3 79.5 11.45 7750 V 115 x 210VC 5 10000 2.40 8 336x143x58 360 480 1/4“ IG 3 77.5 12.45 7451V 70 x 400VC 5 10000 2.50 8 435x130x58 360 480 1/4“ IG 3 80.1 16.77 7500 65 x 390C 25 3500 2.70 8 400x170 200 250 1/4“ IG 2 91.4 21.27 2 2 Vibration 50
Page 1 and 2: Pneumatic Tools Quality Technology
Page 3 and 4: Content www.rodcraft.com Company Pr
Page 5 and 6: Impact Socket Set 3/8“ Set of 8 p
Page 7 and 8: Power reduction In order to prevent
Page 9 and 10: 4 1950 Nm max. SmartDUOPACT composi
Page 11 and 12: 1“ Sockets Short and long, sets a
Page 13 and 14: Safety Gloves ABCD Safety Gloves ww
Page 15 and 16: Sets All sets mentioned here includ
Page 17 and 18: 3 reversible 6.5 mm composite Ergon
Page 19 and 20: Spiral Hoses Our high quality polyu
Page 21 and 22: Chisel Hammer Accessory Single chis
Page 23 and 24: Needle Scaler More aggressive than
Page 25 and 26: small air file 2 With double piston
Page 27 and 28: Fraising Bits For the precise remov
Page 29 and 30: Rivets: BLIND / BULB / BOLT The mos
Page 31 and 32: Cutting Edge Length [mm] Speciality
Page 33 and 34: ear exhaust 20000 rpm. 6 mm (3 mm)
Page 35 and 36: Practical accessory that can be att
Page 37 and 38: lack ochre green blue caramel Width
Page 39 and 40: Accessory for Pistol Sanders Backin
Page 41 and 42: Grinding and cutting discs The corr
Page 43 and 44: ectangular finger small orbital mov
Page 45 and 46: 2.5 / 5 mm stroke aluminium body la
Page 47 and 48: simple combi-sander 5 mm random orb
Page 49: 2 mm orbit for finishing 80 x 130 m
Page 53 and 54: „Rod-Speed“ 2 1,4 mm Famous pai
Page 55 and 56: for 1 litre bottles Underbody coati
Page 57 and 58: Grease Pumps for MIni Grease Plugs
Page 59 and 60: www.rodcraft.com Chisels for car bo
Page 61 and 62: standard length extra long SIG type
Page 63 and 64: cutting discs grinding discs backin
Page 65 and 66: alancing range (kg) 0,4 - 1,0 1600
Page 67 and 68: maintenance units (5 micron) spray
Page 69 and 70: Compressed Air Hoses Hose Reels 360
Page 71 and 72: Headquarters Germany + Export RODCR

Impact Wrenches - Longin Parkerstore

Create successful ePaper yourself

Delete template?

Save as template?