Specifications Volume One (Div. 0 thru 07) - Lord and Son ...

SECTION 01300 – SUBMITTALS
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes:
1. Preparing and processing of submittals for review and action.
2. Preparing and processing of informational submittals.
B. Submit the following for the Engineer's review and action:
1. Shop drawings.
2. Structural design information required by the contract documents.
3. Product data.
4. Samples.
5. Structural design calculations.
6. Submittals indicated as "for approval."
7. Submittals for which procedures are not defined elsewhere.
C. Submit the following as informational submittals:
1. Certificates.
2. Reports.
3. Qualification statements for manufacturers/installers.
D. Specific submittals are described in individual sections.
E. Do not commence work which requires review of any submittals until receipt of returned
submittals with an acceptable action.
F. Do not allow submittals without an acceptable action marking to be used for the project.
G. Submit all submittals to the engineer.
H. Do not submit substitute items that have not been approved by means of the procedure
specified elsewhere.
I. Do not include requests for substitution (either direct or indirect) on submittals; comply with
procedures for substitutions specified elsewhere.
1.2 DEFINITIONS
A. Shop Drawings: See General Conditions.
1. Shop drawings also include:
a. Product data specifically prepared for this project.
b. Shop or plant inspection and test reports, when made on specific materials,
products, or systems to be used in the work.
B. Product Data: See General Conditions.
1. Product data submittals also include:
a. Performance curves, when issued by the manufacturer for all products of
Emergency Operations Support Addition Submittals 01300 – 1
& Alterations to the Customer Services Bldg.
HMM 239903 / ECUA CIP No. CS141E