Drillfloor equipment - Aker Solutions

More documents

Recommendations

Info

28 Aker Solutions Drilling Technologies Drillfloor equipment MH mud bucket > MH mud bucket retracted The MH mud bucket is designed for safe and smooth leading of drilling mud to tank whilst; - increasing safety - improving working environment - saving natural environment - reducing mud costs The MH mud bucket is suspended to the foundation via the extension arm. The foundation comprises a pedestal suspension with guiding column, bolted to a foundation plate welded to the drill floor. The extension arm enables extension and retraction of the bucket between parked position and the well centre by means of a hydraulic cylinder with stainless steel rod, piping and bearings. The bucket latches on to the drill string by means of three hydraulic cylinders with stainless steel rod, piping and bearings. It then leads the mud through the drain hose terminating in the exit interface, located on drill floor and connected to the mud tank. When the mud has been drained from the bucket, the bucket clamps off and the extension arm retracts the bucket to parked position. Technical data Max. travel length 2 800 [9.2] mm [Feet] Retraction length (guide column c/c - bucket c/c) 1 700 [5.6] mm [Feet] Extension length (guide column c/c - bucket c/c) 4 300 [14.1] mm [Feet] Slewing sector (manual for parking pos.) ± 133 Degr Range, pipe seals 2 7/8”-3½”-4”-5”-5½”-5 7/8”-6 5/8” Inch Time cycle (bucket open – close) Time cycle (extension arm – retract) 8-10 Sec. Time cycle (extension arm – extend) 2-3 Sec. 8-10 Sec. Drain hose size 6” Inch Drain hose length 6 000 [19.7] mm [Feet]
Aker Solutions Drilling Technologies Drillfloor equipment 29 MH winches > MH utility winch The portfolio covers complete stand-alone and package integrated winch units/systems designed with special emphasis on safe, efficient and reliable operations: • MH utility winch • MH manriding winch • MH guideline winch • MH podline winch Description The winches are delivered as complete units, fully tested and ready for horizontal mounting by means of bolting to substructure and connection to hydraulic ringline systems. Typically comprise • Gearbox • Drum • Failsafe brake system • Hydraulic motor • Counter balance valve • Local control panel > MH manrider winch > MH podline winch Short-time installation is achieved as no special tools are required for this operation. All winches are fitted with lifting lugs for safe and easy handling. Safe, smooth and user friendly operation and control are performed from the local control panel. Due to high reliability, maintenance is briefly limited to periodic lubrication and filter replacements. Optional features • Hydraulic remote control panel (portable or fixed) • Portable wireless control panel • Hydraulic power unit • Wire spooling system • Snatch block An extensive range of alternatives and options completes our portfolio with the intention to suit any specific or special requirement. Technical data SWL Rope dia. x length Weight (incl. rope) MH UW - 5mT 5mT (11020 lbf) 19 mm (0.74”) 150 m (492´) 1500 kg (3300 lb) MH UW - 10mT 10mT (22050 lbf) 26 mm (1.02”) 150 m (492´) 2300 kg (5070 lb) MH MW - 150 kg 0.15mT (330 lbf) 10 mm (0.39”) 140 m (460´ 1050 kg (2300 lb) MH GLW - 10mT 10mT (22050 lbf) 26 mm (1.02”) 1200 m (3940´) 9600 kg (21150 lb MH GLWS-7.5mT 7.5mT (22050 lbf) 19 mm (0.74”) 1500 m (4925’) 9600 kg (21150 lb
Page 1 and 2: Aker 21 Solutions Drilling Technolo
Page 3 and 4: Aker Solutions Drilling Technologie
Page 5 and 6: Aker Solutions Drilling Technologie
Page 7: Aker Solutions Drilling Technologie

Drillfloor equipment - Aker Solutions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?