Centrifugal Fans Brochure - Flextraction.co.uk

CSXR
CSXRT
CJSXR
CSXR: Single-inlet, belt-driven centrifugal fans with axis outlet and
impeller with backward-facing blades
CSXRT: Single-inlet, belt-driven centrifugal fans with electric motor,
pulley, belt kit and standardised protectors and impeller with backwardfacing
blades.
CJSXR: Soundproof ventilation units with backward-facing blades, fitted
with CSXR series fans on rubber dampers
Fan:
• Galvanized sheet steel casing
• Impeller with backward-facing blades made from galvanised sheet steel
• Galvanised sheet steel structure with thermal insulation and soundproofing (CJSXR)
• Stuffing-box for cable input (CJSXR)
CSXR
Motor:
• Motors with IE-2 efficiency, except for motors with lower
powers than 0.75 kW, monophase motors or two-speed
motors
• Class F motors with ball bearings, IP55 protection
• Three-phase 230/400V. 50Hz (up to 5.5CV) and 400/690V.
50Hz (power over 5.5CV)
• Max. temperature of air for transport: -20ºC. +60ºC.
CSXRT
CJSXR
Finish:
• Anticorrosive galvanized sheet steel.
On request:
• Different outlet positions
• Special windings for different voltages
• With two speed motors
Order code
CSXR 400
CSXRT 500 4
CSXR: Centrifugal
single-inlet fans with
axis outlet
Impeller size
CSXRT: Centrifugal single-inlet
fans with motor
CJSXR: Ventilation units with
impeller with backward-facing
blades
Impeller size
Power
motor (c.v.)
Technical characteristics
Model
Max.
Speed
(r/min)
Max. installed
Power
(kW)
Maximum
Airflow
(m 3 /h)
Air temperature
(ºC)
min. max.
CSXR-315 3200 1.1 5050 -20 85 27
CSXR-355 2800 1.5 6650 -20 85 39
CSXR-400 2400 1.5 7700 -20 85 44
CSXR-450 2200 3 10100 -20 85 55
CSXR-500 2200 5.5 14000 -20 85 70
CSXR-560 2000 7.5 18300 -20 85 110
CSXR-630 1600 7.5 19800 -20 85 125
CSXR-710 1400 9.2 25920 -20 85 175
CSXR-800 1600 22 40000 -20 85 252
CSXR-900 1400 30 51000 -20 85 360
CSXR-1000 1400 37 64000 -20 85 445
Approx.
weight
(Kg)
71