1 - A.O. Smith Water Heaters
1 - A.O. Smith Water Heaters
1 - A.O. Smith Water Heaters
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
How to Use (Using the remote controller)<br />
Setting and Using the <strong>Water</strong> Heater<br />
2<br />
(Starting with the Power Off)<br />
1 1<br />
Press the Power<br />
On/Off Button.<br />
On<br />
The temperature will be<br />
displayed on the remote<br />
control thermostat.<br />
On<br />
Previous set<br />
temperature<br />
(Ex.: 110°F)<br />
Caution<br />
High Temperature<br />
To prevent scalding:<br />
Temperatures above 125 °F can scald.<br />
• Check the water temperature by hand before bathing or<br />
showering.<br />
• When setting the unit to 125°F or higher, the<br />
temperature display will flash for 10 seconds as a high<br />
temperature warning.<br />
• Take caution when using the unit again after setting to<br />
125°F or higher. Always check the set temperature<br />
before use.<br />
Remote Controller Display<br />
Flashes for 10 sec<br />
• Do not allow anyone to change the water temperature<br />
while hot water is running.<br />
12
Change language