b.tech textile technology - Technical symposium.

REFERENCES
1. Adanur S., “Wellington sears handbook of Industrial textiles”, Technomic publishing co inc,
1995, ISBN : 1 – 56676 – 340 – 1.
2. Pushpa Bajaj and Sengupta A.K., “Protective clothing”, The Textile Institute, 1992, ISBN :1-
870812 – 44-1.
3. Chellamani K.P. and Chattopadhyay D., “Yarns and Technical Textiles”, SITRA, 1999.
4. Scott R.A.,“Textiles for protection”, Woodhead Publishing Limited, Cambridge, UK, ISBN :1-
85573-921-6, 2005.
5. Saville.B.P., “Physical testing of textiles”, Woodhead Publishing Limited, Cambridge, UK,
ISBN :1-85573-367-6, 1999.
6. Fan Q., “Chemical Testing of Textiles”, Woodhead Publishing Limited, Cambridge, UK, ISBN
:1-85573-917-8, 2005.
7. Long A.C., “Design and manufacture of Textile Composities”, Woodhead Publishing Limited,
Cambridge, UK, ISBN : 1-85573-744-2, 2005.
8. Fung W., “Coated and laminated textiles”, Woodhead Publishing Limited, Cambridge, UK,
ISBN :1-85573-576-8, 2002.
9. Horrocks A.R. and Anand S.C., “Handbook of Technical Textiles”, Woodhead Publishing
Limited, Cambridge, UK, ISBN :1-85573-385-4, 2004.
10. Anand S.C., Kennedy J.F., Miraftab M. and Rajendran S., “Medical textiles and biomaterials
for health care”, Woodhead Publishing Limited, Cambridge, UK, ISBN: 1-85573-683-7,
2006.
TT 9038 INDUSTRIAL ENGINEERING FOR TEXTILE L T P C
AND APPAREL INDUSTRIES 3 0 0 3
UNIT I 5
Industrial Engineering - evolution, functions, role of industrial engineer
UNIT II 13
Methods study – introduction, techniques of recording; method analysis techniques; principles of
motion economy; method study in garment manufacture; ergonomics- importance, workplace
design, fatigue
UNIT III 13
Work measurement – introduction; time study – equipment and procedure; standard data;
predetermined time standards; work sampling techniques; incentive wage system; work
measurement applied to garment industry
UNIT IV 5
Site selection for textile industry; plant layout - types of layouts suitable for textile industry,
methods to construct layout; line balancing
UNIT V 9
Statistical Process Control – data collection; concept of AQL, control charts in quality control;
process capability
TOTAL: 45 PERIODS
51