Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<str<strong>on</strong>g>Snap</str<strong>on</strong>g>-<strong>on</strong> EEWB300A Operators Manual<br />
3.0 INSTALLATION INSTRUCTIONS<br />
To install the machine proceed as follows:<br />
DO NOT LIFT THE MACHINE FROM<br />
THE SHAFT<br />
A. Install the accessories pegs (Fig.20). Tighten them firmly.<br />
C. If you have purchased the opti<strong>on</strong>al wheel guard, install it<br />
now. (Fig.22).<br />
Note positi<strong>on</strong> of spacer<br />
Fig.20<br />
B. Remove the screws that secure the machine to the pallet<br />
and slide it <strong>on</strong>to the floor w<str<strong>on</strong>g>here</str<strong>on</strong>g> it is to be installed. Hold the<br />
machine <strong>on</strong> the wheel guard support tube and <strong>on</strong> the accessories<br />
pegs (Fig.21).<br />
CAUTION! CAREFULLY REMOVE THE BALANCER<br />
FROM THE PALLET.<br />
THE UNIT IS HEAVY AND THE WEIGHT IS NOT EVENLY<br />
DISTRIBUTED.<br />
DROPPING THE UNIT MAY CAUSE PERSONAL INJURY<br />
OR EQUIPMENT DAMAGE.<br />
147<br />
Fig.22<br />
CAUTION!<br />
CAREFULLY HOLD THE HOOD WHILE INSTALLING THE<br />
SCREWS.<br />
D. Place the c<strong>on</strong>es and other accessories <strong>on</strong>to the supports<br />
provided.<br />
917<br />
Fig.21<br />
913<br />
Page 8