P350 MANUAL 1.cdr - Harmar
P350 MANUAL 1.cdr - Harmar
P350 MANUAL 1.cdr - Harmar
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION & ASSEMBLY<br />
3/8-16 X 2.50<br />
BUTTON HEAD<br />
(x2)<br />
LOWER SEAT<br />
SUPPORT<br />
3/8-16<br />
NYLON NUT<br />
(x2)<br />
10 Attach Foot & Leg Rest Assembly<br />
The foot rest, shown, and leg rest are designed<br />
to be ambidextrous, to allow for right & left<br />
hand seating. The Foot & Leg Rest should<br />
always be on the side nearest to the water. To<br />
attach the Assembly, simply align the holes on<br />
the Foot & Leg Rest Assembly with that of the<br />
Lower Seat Support and fasten with the supplied<br />
hardware.<br />
FOOT REST<br />
ASSEMBLY<br />
LEG REST<br />
ASSEMBLY<br />
11<br />
Foot & Leg Rest Adjustment<br />
The Foot Rest has two setting, high and low,<br />
and the Leg Rest has three settings, high,<br />
medium, and low, depending on the desired<br />
height. To adjust the height of the Foot Rest,<br />
remove the bolt, adjust the height up or<br />
down, align the holes at the desired height,<br />
reinsert the bolt into the correct hole, as<br />
shown, and fasten.<br />
FOOT REST BOLT SETTINGS<br />
(Bolt Location)<br />
HIGH<br />
1/2-13 X 2.50<br />
BUTTON HEAD<br />
LOW<br />
1/2-13<br />
NYLON NUT<br />
LEG REST BOLT SETTINGS<br />
(Bolt Location)<br />
H M L<br />
H M L<br />
16